Convert CONFIG_ENV_SPI_* to Kconfig

[platform/kernel/u-boot.git] / include / configs / cgtqmx6eval.h

diff --git a/include/configs/cgtqmx6eval.h b/include/configs/cgtqmx6eval.h
index 9a0469d..ad0a64a 100644 (file)
--- a/include/configs/cgtqmx6eval.h
+++ b/include/configs/cgtqmx6eval.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  *
  * Congatec Conga-QEVAl board configuration file.
@@ -6,8 +7,6 @@
  * Based on Freescale i.MX6Q Sabre Lite board configuration file.
  * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com>
  * Leo Sartre, <lsartre@adeneo-embedded.com>
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_CGTQMX6EVAL_H
@@ -18,22 +17,13 @@
 #define CONFIG_MACH_TYPE       4122
 
 #ifdef CONFIG_SPL
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_MMC_SUPPORT
-#define CONFIG_SPL_SPI_SUPPORT
-#define CONFIG_SPL_SPI_FLASH_SUPPORT
 #define CONFIG_SYS_SPI_U_BOOT_OFFS     (64 * 1024)
-#define CONFIG_SPL_SPI_LOAD
 #include "imx6_spl.h"
 #endif
 
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN          (10 * 1024 * 1024)
 
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_LATE_INIT
-#define CONFIG_MISC_INIT_R
-
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE          UART2_BASE
 
@@ -41,16 +31,8 @@
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 
 /* SPI NOR */
-#define CONFIG_SPI_FLASH
 #define CONFIG_SPI_FLASH_STMICRO
 #define CONFIG_SPI_FLASH_SST
-#define CONFIG_MXC_SPI
-#define CONFIG_SF_DEFAULT_BUS          0
-#define CONFIG_SF_DEFAULT_SPEED                20000000
-#define CONFIG_SF_DEFAULT_MODE         (SPI_MODE_0)
-
-/* Miscellaneous commands */
-#define CONFIG_CMD_BMODE
 
 /* Thermal support */
 #define CONFIG_IMX_THERMAL
@@ -70,79 +52,44 @@
 #define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
 
 /* USB Configs */
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_MX6
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_ASIX
 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS   0
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 /* Enabled USB controller number */
-#define CONFIG_USB_KEYBOARD
-#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
 
 #define CONFIG_USBD_HS
 
-#define CONFIG_USB_FUNCTION_MASS_STORAGE
-
-/* USB Device Firmware Update support */
-#define CONFIG_USB_FUNCTION_DFU
-#define CONFIG_DFU_MMC
-#define CONFIG_DFU_SF
-
-#define CONFIG_USB_FUNCTION_FASTBOOT
-#define CONFIG_CMD_FASTBOOT
-#define CONFIG_ANDROID_BOOT_IMAGE
-#define CONFIG_FASTBOOT_BUF_ADDR   CONFIG_SYS_LOAD_ADDR
-#define CONFIG_FASTBOOT_BUF_SIZE   0x07000000
-
 /* Framebuffer */
-#define CONFIG_VIDEO
 #define CONFIG_VIDEO_IPUV3
-#define CONFIG_CFB_CONSOLE
-#define CONFIG_VGA_AS_SINGLE_DEVICE
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 #define CONFIG_VIDEO_BMP_RLE8
 #define CONFIG_SPLASH_SCREEN
 #define CONFIG_SPLASH_SCREEN_ALIGN
 #define CONFIG_BMP_16BPP
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_VIDEO_BMP_LOGO
-#ifdef CONFIG_MX6DL
-#define CONFIG_IPUV3_CLK 198000000
-#else
-#define CONFIG_IPUV3_CLK 264000000
-#endif
 #define CONFIG_IMX_HDMI
 
 /* SATA */
-#define CONFIG_CMD_SATA
-#define CONFIG_DWC_AHSATA
 #define CONFIG_SYS_SATA_MAX_DEVICE     1
 #define CONFIG_DWC_AHSATA_PORT_ID      0
 #define CONFIG_DWC_AHSATA_BASE_ADDR    SATA_ARB_BASE_ADDR
 #define CONFIG_LBA48
-#define CONFIG_LIBATA
 
 /* Ethernet */
 #define CONFIG_FEC_MXC
-#define CONFIG_MII
 #define IMX_FEC_BASE                   ENET_BASE_ADDR
 #define CONFIG_FEC_XCV_TYPE            RGMII
 #define CONFIG_ETHPRIME                        "FEC"
 #define CONFIG_FEC_MXC_PHYADDR         6
-#define CONFIG_PHYLIB
 #define CONFIG_PHY_ATHEROS
 
 /* Command definition */
 
 #define CONFIG_MXC_UART_BASE   UART2_BASE
-#define CONFIG_CONSOLE_DEV     "ttymxc1"
+#define CONSOLE_DEV    "ttymxc1"
 #define CONFIG_MMCROOT         "/dev/mmcblk0p2"
 #define CONFIG_SYS_MMC_ENV_DEV         0
 
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "script=boot.scr\0" \
        "image=zImage\0" \
@@ -150,7 +97,7 @@
        "fdt_addr_r=0x18000000\0" \
        "boot_fdt=try\0" \
        "ip_dyn=yes\0" \
-       "console=" CONFIG_CONSOLE_DEV "\0" \
+       "console=" CONSOLE_DEV "\0" \
        "dfuspi=dfu 0 sf 0:0:10000000:0\0" \
        "dfu_alt_info_spl=spl raw 0x400\0" \
        "dfu_alt_info_img=u-boot raw 0x10000\0" \
@@ -248,7 +195,6 @@
 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 
 /* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS          1
 #define PHYS_SDRAM                    MMDC0_ARB_BASE_ADDR
 
 #define CONFIG_SYS_SDRAM_BASE         PHYS_SDRAM
@@ -268,14 +214,9 @@
 
 #define CONFIG_ENV_SIZE                        (8 * 1024)
 
-#define CONFIG_ENV_IS_IN_SPI_FLASH
 #if defined(CONFIG_ENV_IS_IN_SPI_FLASH)
 #define CONFIG_ENV_OFFSET              (768 * 1024)
 #define CONFIG_ENV_SECT_SIZE           (64 * 1024)
-#define CONFIG_ENV_SPI_BUS             CONFIG_SF_DEFAULT_BUS
-#define CONFIG_ENV_SPI_CS              CONFIG_SF_DEFAULT_CS
-#define CONFIG_ENV_SPI_MODE            CONFIG_SF_DEFAULT_MODE
-#define CONFIG_ENV_SPI_MAX_HZ          CONFIG_SF_DEFAULT_SPEED
 #endif
 
 #endif                        /* __CONFIG_CGTQMX6EVAL_H */