* Board
*/
#define CONFIG_DRIVER_TI_EMAC
-#define MACH_TYPE_CALIMAIN 3528
#define CONFIG_MACH_TYPE MACH_TYPE_CALIMAIN
/*
* SoC Configuration
*/
-#define CONFIG_MACH_DAVINCI_CALIMAIN
-#define CONFIG_SOC_DA8XX /* TI DA8xx SoC */
-#define CONFIG_SOC_DA850 /* TI DA850 SoC */
#define CONFIG_SYS_EXCEPTION_VECTORS_HIGH
#define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID)
#define CONFIG_SYS_OSCIN_FREQ calimain_get_osc_freq()
#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE
#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID)
-#define CONFIG_SYS_TEXT_BASE 0x60000000
-#define CONFIG_DA850_LOWLEVEL
-#define CONFIG_SYS_DA850_PLL_INIT
-#define CONFIG_SYS_DA850_DDR_INIT
#define CONFIG_ARCH_CPU_INIT
#define CONFIG_DA8XX_GPIO
#define CONFIG_HW_WATCHDOG
/*
* PLL configuration
*/
-#define CONFIG_SYS_DV_CLKMODE 0
-#define CONFIG_SYS_DA850_PLL0_POSTDIV 1
-#define CONFIG_SYS_DA850_PLL0_PLLDIV1 0x8000
-#define CONFIG_SYS_DA850_PLL0_PLLDIV2 0x8001
-#define CONFIG_SYS_DA850_PLL0_PLLDIV3 0x8002
-#define CONFIG_SYS_DA850_PLL0_PLLDIV4 0x8003
-#define CONFIG_SYS_DA850_PLL0_PLLDIV5 0x8002
-#define CONFIG_SYS_DA850_PLL0_PLLDIV6 CONFIG_SYS_DA850_PLL0_PLLDIV1
-#define CONFIG_SYS_DA850_PLL0_PLLDIV7 0x8005
-
-#define CONFIG_SYS_DA850_PLL1_POSTDIV 1
-#define CONFIG_SYS_DA850_PLL1_PLLDIV1 0x8000
-#define CONFIG_SYS_DA850_PLL1_PLLDIV2 0x8001
-#define CONFIG_SYS_DA850_PLL1_PLLDIV3 0x8002
#define CONFIG_SYS_DA850_PLL0_PLLM \
((calimain_get_osc_freq() == 25000000) ? 23 : 24)
/*
* Serial Driver info
*/
-#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size */
#define CONFIG_SYS_NS16550_COM1 DAVINCI_UART2_BASE /* Base address of UART2 */
#define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID)
#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
-#define CONFIG_BAUDRATE 115200 /* Default baud rate */
-#define CONFIG_ENV_IS_IN_FLASH
#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_SYS_FLASH_PROTECTION
* Network & Ethernet Configuration
*/
#ifdef CONFIG_DRIVER_TI_EMAC
-#define CONFIG_EMAC_MDIO_PHY_NUM 1
#define CONFIG_MII
#define CONFIG_BOOTP_DNS
#define CONFIG_BOOTP_DNS2
*/
#define CONFIG_BOOTFILE "uImage" /* Boot file name */
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000)
#define CONFIG_LOADADDR 0xc0700000
-#define CONFIG_VERSION_VARIABLE
#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_HUSH_PARSER
#define CONFIG_CMDLINE_EDITING
#define CONFIG_SYS_LONGHELP
-#define CONFIG_CRC32_VERIFY
#define CONFIG_MX_CYCLIC
/*
#define CONFIG_CMDLINE_TAG
#define CONFIG_REVISION_TAG
#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_BOOTARGS ""
#define CONFIG_BOOTCOMMAND "run checkupdate; run checkbutton;"
-#define CONFIG_BOOTDELAY 0
-#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
#define CONFIG_BOOT_RETRY_TIME 60 /* continue boot after 60 s inactivity */
#define CONFIG_RESET_TO_RETRY
"echo Product: $product; " \
"gpio c 1; gpio c 2;"
-/*
- * U-Boot commands
- */
-#define CONFIG_CMD_ENV
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SAVES
-
-#ifndef CONFIG_DRIVER_TI_EMAC
-#undef CONFIG_CMD_DHCP
-#undef CONFIG_CMD_MII
-#undef CONFIG_CMD_PING
-#endif
-
/* additions for new relocation code, must added to all boards */
#define CONFIG_SYS_SDRAM_BASE 0xc0000000
/* initial stack pointer in internal SRAM */
#define CONFIG_SYS_INIT_SP_ADDR (0x8001ff00)
-#define CONFIG_BOOTCOUNT_LIMIT
#define CONFIG_SYS_BOOTCOUNT_LE /* Use little-endian accessors */
#define CONFIG_SYS_BOOTCOUNT_ADDR DAVINCI_RTC_BASE
int calimain_get_osc_freq(void);
#endif
+#include <asm/arch/hardware.h>
+
#endif /* __CONFIG_H */