Convert CONFIG_SYS_BOOTM_LEN to Kconfig

[platform/kernel/u-boot.git] / include / configs / brppt1.h

diff --git a/include/configs/brppt1.h b/include/configs/brppt1.h
index 5a40f3a..789e6a4 100644 (file)
--- a/include/configs/brppt1.h
+++ b/include/configs/brppt1.h
@@ -13,24 +13,14 @@
 
 #include <configs/bur_cfg_common.h>
 #include <configs/bur_am335x_common.h>
+#include <linux/stringify.h>
 /* ------------------------------------------------------------------------- */
 /* memory */
-#define CONFIG_SYS_MALLOC_LEN          (5 * 1024 * 1024)
-#define CONFIG_SYS_BOOTM_LEN           SZ_32M
 
 /* Clock Defines */
 #define V_OSCK                         26000000  /* Clock output from T2 */
 #define V_SCLK                         (V_OSCK)
 
-#define CONFIG_POWER_TPS65217
-
-/* Support both device trees and ATAGs. */
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-/*#define CONFIG_MACH_TYPE             3589*/
-#define CONFIG_MACH_TYPE               0xFFFFFFFF /* TODO: check with kernel*/
-
 /*
  * When we have NAND flash we expect to be making use of mtdparts,
  * both for ease of use in U-Boot and for passing information on to
@@ -38,31 +28,16 @@
  */
 
 #ifdef CONFIG_SPL_OS_BOOT
-#define CONFIG_SYS_SPL_ARGS_ADDR               0x80F80000
-
 /* RAW SD card / eMMC */
-#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR        0x900   /* address 0x120000 */
-#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR  0x80    /* address 0x10000 */
-#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0x80    /* 64KiB */
-
-/* NAND */
-#ifdef CONFIG_NAND
-#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS                0x140000
-#endif /* CONFIG_NAND */
+
 #endif /* CONFIG_SPL_OS_BOOT */
 
-#ifdef CONFIG_NAND
-#define CONFIG_SPL_NAND_BASE
-#define CONFIG_SPL_NAND_DRIVERS
-#define CONFIG_SPL_NAND_ECC
+#ifdef CONFIG_MTD_RAW_NAND
 #define CONFIG_SYS_NAND_U_BOOT_START   CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_NAND_U_BOOT_OFFS    0x80000
-#endif /* CONFIG_NAND */
+#endif /* CONFIG_MTD_RAW_NAND */
 
-#ifdef CONFIG_NAND
+#ifdef CONFIG_MTD_RAW_NAND
 #define NANDTGTS \
-"mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
-"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
 "cfgscr=mw ${dtbaddr} 0; nand read ${cfgaddr} cfgscr && source ${cfgaddr};" \
 " fdt addr ${dtbaddr} || cp ${fdtcontroladdr} ${dtbaddr} 4000\0" \
 "nandargs=setenv bootargs console=${console} ${optargs} ${optargs_rot} " \
@@ -74,7 +49,7 @@
 "b_tgts_pme=usb0 nand net\0"
 #else
 #define NANDTGTS ""
-#endif /* CONFIG_NAND */
+#endif /* CONFIG_MTD_RAW_NAND */
 
 #define MMCSPI_TGTS \
 "t30args#0=setenv bootargs ${optargs_rot} ${optargs} console=${console} " \
@@ -121,11 +96,9 @@ MMCSPI_TGTS \
 
 #define LOAD_OFFSET(x)                 0x8##x
 
-#ifndef CONFIG_SPL_BUILD
 #define CONFIG_EXTRA_ENV_SETTINGS \
 BUR_COMMON_ENV \
 "verify=no\0" \
-"autoload=0\0" \
 "scraddr=" __stringify(LOAD_OFFSET(0000000)) "\0" \
 "cfgaddr=" __stringify(LOAD_OFFSET(0020000)) "\0" \
 "dtbaddr=" __stringify(LOAD_OFFSET(0040000)) "\0" \
@@ -145,9 +118,8 @@ NANDTGTS \
 "b_default=run b_deftgts; for target in ${b_tgts};"\
 " do echo \"### booting ${target} ###\"; run b_${target};" \
 " if test ${b_break} = 1; then; exit; fi; done\0"
-#endif /* !CONFIG_SPL_BUILD*/
 
-#ifdef CONFIG_NAND
+#ifdef CONFIG_MTD_RAW_NAND
 /*
  * GPMC  block.  We support 1 device and the physical address to
  * access CS0 at is 0x8000000.
@@ -155,14 +127,6 @@ NANDTGTS \
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_SYS_NAND_BASE           0x8000000
 /* don't change OMAP_ELM, ECCSCHEME. ROM code only supports this */
-#define CONFIG_NAND_OMAP_ECCSCHEME     OMAP_ECC_BCH8_CODE_HW
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_BLOCK_SIZE     (128*1024)
-#define CONFIG_SYS_NAND_PAGE_SIZE      2048
-#define CONFIG_SYS_NAND_PAGE_COUNT     (CONFIG_SYS_NAND_BLOCK_SIZE / \
-                                       CONFIG_SYS_NAND_PAGE_SIZE)
-#define CONFIG_SYS_NAND_OOBSIZE                64
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS  NAND_LARGE_BADBLOCK_POS
 #define CONFIG_SYS_NAND_ECCPOS         {2, 3, 4, 5, 6, 7, 8, 9, \
                                        10, 11, 12, 13, 14, 15, 16, 17, \
                                        18, 19, 20, 21, 22, 23, 24, 25, \
@@ -177,28 +141,10 @@ NANDTGTS \
 #define CONFIG_SYS_NAND_U_BOOT_START   CONFIG_SYS_TEXT_BASE
 
 #define CONFIG_NAND_OMAP_GPMC_WSCFG    1
-#endif /* CONFIG_NAND */
-
-#if defined(CONFIG_SPI)
-/* SPI Flash */
-#define CONFIG_SYS_SPI_U_BOOT_OFFS             0x40000
-/* Environment */
-#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
-#define CONFIG_ENV_OFFSET_REDUND               (CONFIG_ENV_OFFSET + \
-                                                CONFIG_ENV_SECT_SIZE)
-#elif defined(CONFIG_ENV_IS_IN_MMC)
-#define CONFIG_SYS_MMC_ENV_DEV         1
-#define CONFIG_SYS_MMC_ENV_PART                2
-#define CONFIG_ENV_OFFSET              0x40000 /* TODO: Adresse definieren */
-#define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
-#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
-
-#elif defined(CONFIG_ENV_IS_IN_NAND)
-/* No NAND env support in SPL */
-#define CONFIG_ENV_OFFSET              0x60000
+#endif /* CONFIG_MTD_RAW_NAND */
+
+#if defined(CONFIG_ENV_IS_IN_NAND)
 #define CONFIG_SYS_ENV_SECT_SIZE       CONFIG_ENV_SIZE
-#else
-#error "no storage for Environment defined!"
 #endif
 
 #endif /* ! __CONFIG_BRPPT1_H__ */