mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

[platform/kernel/u-boot.git] / include / configs / brppt1.h

diff --git a/include/configs/brppt1.h b/include/configs/brppt1.h
index d5b2573..3019b97 100644 (file)
--- a/include/configs/brppt1.h
+++ b/include/configs/brppt1.h
@@ -31,36 +31,40 @@
 /*#define CONFIG_MACH_TYPE             3589*/
 #define CONFIG_MACH_TYPE               0xFFFFFFFF /* TODO: check with kernel*/
 
-/* MMC/SD IP block */
-#if defined(CONFIG_EMMC_BOOT)
- #define CONFIG_SUPPORT_EMMC_BOOT
-#endif /* CONFIG_EMMC_BOOT */
-
 /*
- * When we have SPI or NAND flash we expect to be making use of mtdparts,
+ * When we have NAND flash we expect to be making use of mtdparts,
  * both for ease of use in U-Boot and for passing information on to
  * the Linux kernel.
  */
-#if defined(CONFIG_SPI_BOOT) || defined(CONFIG_NAND)
-#define CONFIG_MTD_DEVICE              /* Required for mtdparts */
-#endif /* CONFIG_SPI_BOOT, ... */
 
-#ifdef CONFIG_NAND
+#ifdef CONFIG_SPL_OS_BOOT
+#define CONFIG_SYS_SPL_ARGS_ADDR               0x80F80000
+
+/* RAW SD card / eMMC */
+#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR        0x900   /* address 0x120000 */
+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR  0x80    /* address 0x10000 */
+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0x80    /* 64KiB */
+
+/* NAND */
+#ifdef CONFIG_MTD_RAW_NAND
+#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS                0x140000
+#endif /* CONFIG_MTD_RAW_NAND */
+#endif /* CONFIG_SPL_OS_BOOT */
+
+#ifdef CONFIG_MTD_RAW_NAND
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC
 #define CONFIG_SYS_NAND_U_BOOT_START   CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_NAND_U_BOOT_OFFS    0x80000
-#endif /* CONFIG_NAND */
+#endif /* CONFIG_MTD_RAW_NAND */
 
-/* Always 64 KiB env size */
-#define CONFIG_ENV_SIZE                        (64 << 10)
-
-#ifdef CONFIG_NAND
+#ifdef CONFIG_MTD_RAW_NAND
 #define NANDTGTS \
 "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
 "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
-"cfgscr=nand read ${cfgaddr} cfgscr && source ${cfgaddr}\0" \
+"cfgscr=mw ${dtbaddr} 0; nand read ${cfgaddr} cfgscr && source ${cfgaddr};" \
+" fdt addr ${dtbaddr} || cp ${fdtcontroladdr} ${dtbaddr} 4000\0" \
 "nandargs=setenv bootargs console=${console} ${optargs} ${optargs_rot} " \
        "root=mtd6 rootfstype=jffs2 b_mode=${b_mode}\0" \
 "b_nand=nand read ${loadaddr} kernel; nand read ${dtbaddr} dtb; " \
@@ -70,7 +74,7 @@
 "b_tgts_pme=usb0 nand net\0"
 #else
 #define NANDTGTS ""
-#endif /* CONFIG_NAND */
+#endif /* CONFIG_MTD_RAW_NAND */
 
 #define MMCSPI_TGTS \
 "t30args#0=setenv bootargs ${optargs_rot} ${optargs} console=${console} " \
@@ -95,10 +99,12 @@
 "b_tgts_pme=net usb0 mmc0 mmc1\0" \
 "loaddev=mmc 1\0"
 
-#ifdef CONFIG_MMC
+#ifdef CONFIG_ENV_IS_IN_MMC
 #define MMCTGTS \
 MMCSPI_TGTS \
-"cfgscr=mmc dev 1; mmc read ${cfgaddr} 200 80; source ${cfgaddr}\0"
+"cfgscr=mw ${dtbaddr} 0;" \
+" mmc dev 1; mmc read ${cfgaddr} 200 80; source ${cfgaddr};" \
+" fdt addr ${dtbaddr} || cp ${fdtcontroladdr} ${dtbaddr} 4000\0"
 #else
 #define MMCTGTS ""
 #endif /* CONFIG_MMC */
@@ -106,7 +112,9 @@ MMCSPI_TGTS \
 #ifdef CONFIG_SPI
 #define SPITGTS \
 MMCSPI_TGTS \
-"cfgscr=sf probe; sf read ${cfgaddr} 0xC0000 10000; source ${cfgaddr}\0"
+"cfgscr=mw ${dtbaddr} 0;" \
+" sf probe; sf read ${cfgaddr} 0xC0000 10000; source ${cfgaddr};" \
+" fdt addr ${dtbaddr} || cp ${fdtcontroladdr} ${dtbaddr} 4000\0"
 #else
 #define SPITGTS ""
 #endif /* CONFIG_SPI */
@@ -139,7 +147,7 @@ NANDTGTS \
 " if test ${b_break} = 1; then; exit; fi; done\0"
 #endif /* !CONFIG_SPL_BUILD*/
 
-#ifdef CONFIG_NAND
+#ifdef CONFIG_MTD_RAW_NAND
 /*
  * GPMC  block.  We support 1 device and the physical address to
  * access CS0 at is 0x8000000.
@@ -167,39 +175,19 @@ NANDTGTS \
 #define CONFIG_SYS_NAND_ECCBYTES       14
 
 #define CONFIG_SYS_NAND_U_BOOT_START   CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_NAND_U_BOOT_OFFS    0x80000
 
 #define CONFIG_NAND_OMAP_GPMC_WSCFG    1
-#endif /* CONFIG_NAND */
-
-/* USB configuration */
-#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
-#define CONFIG_AM335X_USB0
-#define CONFIG_AM335X_USB0_MODE        MUSB_HOST
-#define CONFIG_AM335X_USB1
-#define CONFIG_AM335X_USB1_MODE MUSB_HOST
-
-#if defined(CONFIG_SPI_BOOT)
-/* McSPI IP block */
-#define CONFIG_SF_DEFAULT_SPEED                24000000
-
-#define CONFIG_SYS_SPI_U_BOOT_OFFS     0x20000
-#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
-#define CONFIG_ENV_SPI_MAX_HZ          CONFIG_SF_DEFAULT_SPEED
-#define CONFIG_ENV_SECT_SIZE           (4 << 10) /* 4 KB sectors */
-#define CONFIG_ENV_OFFSET              (768 << 10) /* 768 KiB in */
-#define CONFIG_ENV_OFFSET_REDUND       (896 << 10) /* 896 KiB in */
-
-#elif defined(CONFIG_EMMC_BOOT)
+#endif /* CONFIG_MTD_RAW_NAND */
+
+#if defined(CONFIG_SPI)
+/* SPI Flash */
+/* Environment */
+#elif defined(CONFIG_ENV_IS_IN_MMC)
 #define CONFIG_SYS_MMC_ENV_DEV         1
 #define CONFIG_SYS_MMC_ENV_PART                2
-#define CONFIG_ENV_OFFSET              0x40000 /* TODO: Adresse definieren */
-#define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
-#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
 
-#elif defined(CONFIG_NAND)
+#elif defined(CONFIG_ENV_IS_IN_NAND)
 /* No NAND env support in SPL */
-#define CONFIG_ENV_OFFSET              0x60000
 #define CONFIG_SYS_ENV_SECT_SIZE       CONFIG_ENV_SIZE
 #else
 #error "no storage for Environment defined!"