#define CONFIG_PANIC_HANG 0
/* CPU Options */
-#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_SPI_MASTER
+#define CONFIG_BFIN_CPU bf561-0.5
+#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_SPI_MASTER
/*
* CLOCK SETTINGS CAVEAT
* Then use the dedicated card IP + 1 for the board
* http://docs.blackfin.uclinux.org/doku.php?id=setting_up_the_network
*/
-#define CONFIG_NET_MULTI
-
#define CONFIG_DRIVER_AX88180 1
#define AX88180_BASE 0x2c000000
#define CONFIG_CMD_MII /* enable probing PHY */
-#ifdef CONFIG_NET_MULTI /* also used as the network enabler */
-# define CONFIG_HOSTNAME blackvme /* Bfin board */
-# define CONFIG_IPADDR 169.254.144.145 /* Bfin board */
-# define CONFIG_GATEWAYIP 169.254.144.144 /* dedic card */
-# define CONFIG_SERVERIP 169.254.144.144 /* tftp server */
-# define CONFIG_NETMASK 255.255.255.0
-# define CONFIG_ROOTPATH /export/uClinux-dist/romfs /*NFS*/
-# define CFG_AUTOLOAD "no"
-# define CONFIG_CMD_DHCP
-# define CONFIG_CMD_PING
-# define CONFIG_ENV_OVERWRITE 1 /* enable changing MAC at runtime */
+#define CONFIG_HOSTNAME blackvme /* Bfin board */
+#define CONFIG_IPADDR 169.254.144.145 /* Bfin board */
+#define CONFIG_GATEWAYIP 169.254.144.144 /* dedic card */
+#define CONFIG_SERVERIP 169.254.144.144 /* tftp server */
+#define CONFIG_NETMASK 255.255.255.0
+#define CONFIG_ROOTPATH "/export/uClinux-dist/romfs" /*NFS*/
+#define CFG_AUTOLOAD "no"
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PING
+#define CONFIG_ENV_OVERWRITE 1 /* enable changing MAC at runtime */
/* Comment out hardcoded MAC to enable MAC storage in EEPROM */
/* # define CONFIG_ETHADDR ff:ee:dd:cc:bb:aa */
-#endif
/*
* SDRAM settings & memory map
#define CONFIG_BAUDRATE 57600
#define CONFIG_LOADS_ECHO 1
#define CONFIG_UART_CONSOLE 0
+#define CONFIG_BFIN_SERIAL
/*
* U-Boot environment variables. Use "printenv" to examine.
*/
#define CONFIG_BOOTARGS \
"root=/dev/mtdblock0 rw " \
- "clkin_hz=" MK_STR(CONFIG_CLKIN_HZ) " " \
+ "clkin_hz=" __stringify(CONFIG_CLKIN_HZ) " " \
"earlyprintk=serial,uart0," \
- MK_STR(CONFIG_BAUDRATE) " " \
- "console=ttyBF0," MK_STR(CONFIG_BAUDRATE) " "
+ __stringify(CONFIG_BAUDRATE) " " \
+ "console=ttyBF0," __stringify(CONFIG_BAUDRATE) " "
/* Convenience env variables & commands.
* Reserve kernstart = 0x20000 = 128 kB for U-Boot.
* Soft I2C settings (BF561 does not have hard I2C)
* PF12,13 on SPI connector 0.
*/
-#ifdef CONFIG_SOFT_I2C
+#ifdef CONFIG_SYS_I2C_SOFT
# define CONFIG_CMD_I2C
# define CONFIG_SOFT_I2C_GPIO_SCL GPIO_PF12
# define CONFIG_SOFT_I2C_GPIO_SDA GPIO_PF13