Merge branch 'master' of git://git.denx.de/u-boot-spi
[platform/kernel/u-boot.git] / include / configs / blackstamp.h
index aa33933..83ad659 100644 (file)
@@ -30,7 +30,6 @@
 /*
  * Board settings
  */
-#define CONFIG_NET_MULTI
 #define CONFIG_SMC91111        1
 #define CONFIG_SMC91111_BASE   0x20300300
 
@@ -76,7 +75,7 @@
 #define CONFIG_GATEWAYIP       192.168.0.1
 #define CONFIG_SERVERIP                192.168.0.2
 #define CONFIG_HOSTNAME                blackstamp
-#define CONFIG_ROOTPATH                /checkout/uClinux-dist/romfs
+#define CONFIG_ROOTPATH                "/checkout/uClinux-dist/romfs"
 #define CONFIG_SYS_AUTOLOAD            "no"
 
 /* To remove hardcoding and enable MAC storage in EEPROM  */
 #define CONFIG_BOOTCOMMAND   "run ramboot"
 #define CONFIG_BOOTARGS \
        "root=/dev/mtdblock0 rw " \
-       "clkin_hz=" MK_STR(CONFIG_CLKIN_HZ) " " \
+       "clkin_hz=" __stringify(CONFIG_CLKIN_HZ) " " \
        "earlyprintk=" \
                "serial," \
-               "uart" MK_STR(CONFIG_UART_CONSOLE) "," \
-               MK_STR(CONFIG_BAUDRATE) " " \
-       "console=ttyBF0," MK_STR(CONFIG_BAUDRATE)
+               "uart" __stringify(CONFIG_UART_CONSOLE) "," \
+               __stringify(CONFIG_BAUDRATE) " " \
+       "console=ttyBF0," __stringify(CONFIG_BAUDRATE)
 
 #if defined(CONFIG_CMD_NET)
 # if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS)
                "eeprom write $(loadaddr) 0x0 $(filesize)"
 #  else
 #   define UBOOT_ENV_UPDATE \
-               "sf probe " MK_STR(BFIN_BOOT_SPI_SSEL) ";" \
+               "sf probe " __stringify(BFIN_BOOT_SPI_SSEL) ";" \
                "sf erase 0 0x40000;" \
                "sf write $(loadaddr) 0 $(filesize)"
 #  endif
  * them yet. You can (and probably should) change these values!
  */
 #ifdef CONFIG_SOFT_I2C
-
-#define PF_SCL                 PF9
-#define PF_SDA                 PF8
-
-#define I2C_INIT       do { *pFIO_DIR |= PF_SCL; SSYNC(); } while (0)
-#define I2C_ACTIVE     do { *pFIO_DIR |= PF_SDA; *pFIO_INEN &= ~PF_SDA; SSYNC(); } while (0)
-#define I2C_TRISTATE   do { *pFIO_DIR &= ~PF_SDA; *pFIO_INEN |= PF_SDA; SSYNC(); } while (0)
-#define I2C_READ       ((*pFIO_FLAG_D & PF_SDA) != 0)
-#define I2C_SDA(bit) \
-       do { \
-               if (bit) \
-                       *pFIO_FLAG_S = PF_SDA; \
-               else \
-                       *pFIO_FLAG_C = PF_SDA; \
-               SSYNC(); \
-       } while (0)
-#define I2C_SCL(bit) \
-       do { \
-               if (bit) \
-                       *pFIO_FLAG_S = PF_SCL; \
-               else \
-                       *pFIO_FLAG_C = PF_SCL; \
-               SSYNC(); \
-       } while (0)
-#define I2C_DELAY              udelay(5)       /* 1/4 I2C clock duration */
-
+#define CONFIG_SOFT_I2C_GPIO_SCL GPIO_PF9
+#define CONFIG_SOFT_I2C_GPIO_SDA GPIO_PF8
 #define CONFIG_SYS_I2C_SPEED           50000
 #define CONFIG_SYS_I2C_SLAVE           0xFE
 #endif