MIPS: convert CONFIG_SYS_MIPS_TIMER_FREQ to Kconfig

[platform/kernel/u-boot.git] / include / configs / bk4r1.h

diff --git a/include/configs/bk4r1.h b/include/configs/bk4r1.h
index 0566892..b3e1fdd 100644 (file)
--- a/include/configs/bk4r1.h
+++ b/include/configs/bk4r1.h
@@ -32,18 +32,8 @@
        "preboot=" BK4_NET_INIT \
                "if ${ncenable}; then run if_netconsole start_netconsole; fi\0"
 
-/* BK4r1 boot command sets GPIO103/PTC30 to force USB hub out of reset*/
-#define BK4_BOOTCOMMAND "run set_gpio122; run set_gpio96; sf probe; " \
-                       "run manage_userdata; "
-
 /* Enable PREBOOT variable */
 
-/* Set ARP_TIMEOUT to 500ms */
-#define CONFIG_ARP_TIMEOUT 500UL
-
-/* Set ARP_TIMEOUT_COUNT to 3 repetitions */
-#define CONFIG_NET_RETRY_COUNT 5
-
 /* BK4r1 net init sets GPIO122/PTE17 to enable Ethernet */
 #define BK4_NET_INIT "run set_gpio122;"
 
@@ -57,51 +47,19 @@
                                                "saveenv; " \
                                                "fi; "
 
-/* Autoboot options */
-#define CONFIG_AUTOBOOT_KEYED
-#define CONFIG_AUTOBOOT_PROMPT \
-       "Enter passphrase to stop autoboot, booting in %d seconds\n"
-#define CONFIG_AUTOBOOT_STOP_STR "123"
-
 #include <asm/arch/imx-regs.h>
 #include <linux/sizes.h>
 
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
-/* Enable passing of ATAGs */
-#define CONFIG_CMDLINE_TAG
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + 4 * SZ_1M)
-
-/* Allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
 /* NAND support */
-#define CONFIG_SYS_NAND_ONFI_DETECTION
 #define CONFIG_SYS_MAX_NAND_DEVICE 1
 
 #define IMX_FEC1_BASE                  ENET1_BASE_ADDR
 
-/* QSPI Configs*/
-#ifdef CONFIG_FSL_QSPI
-#define FSL_QSPI_FLASH_SIZE            (SZ_16M)
-#define FSL_QSPI_FLASH_NUM             2
-#define CONFIG_SYS_FSL_QSPI_LE
-#endif
-
-#define CONFIG_LOADADDR        0x82000000
-
-/* We boot from the gfxRAM area of the OCRAM. */
-#define CONFIG_BOARD_SIZE_LIMIT                520192
-
 /* boot command, including the target-defined one if any */
-#define CONFIG_BOOTCOMMAND     BK4_BOOTCOMMAND "run bootcmd_nand"
 
 /* Extra env settings (including the target-defined ones if any) */
 #define CONFIG_EXTRA_ENV_SETTINGS \
        BK4_EXTRA_ENV_SETTINGS \
-       "autoload=no\0" \
        "fdt_high=0xffffffff\0" \
        "initrd_high=0xffffffff\0" \
        "blimg_file=u-boot.vyb\0" \
@@ -115,7 +73,6 @@
        "nfs_root=/path/to/nfs/root\0" \
        "tftptimeout=1000\0" \
        "tftptimeoutcountmax=1000000\0" \
-       "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
        "ipaddr=192.168.0.60\0" \
        "serverip=192.168.0.1\0" \
        "bootargs_base=setenv bootargs rw " \
@@ -239,13 +196,6 @@
                        "source to NAND\0" \
        "active_workset=1\0"
 
-/* Miscellaneous configurable options */
-
-#define CONFIG_SYS_MEMTEST_START       0x80010000
-#define CONFIG_SYS_MEMTEST_END         0x87C00000
-
-#define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
-
 /* Physical memory map */
 #define PHYS_SDRAM                     (0x80000000)
 #define PHYS_SDRAM_SIZE                (SZ_512M)
@@ -254,9 +204,4 @@
 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 
-#define CONFIG_SYS_INIT_SP_OFFSET \
-       (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
-       (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-
 #endif /* __CONFIG_H */