Makefile: move all Power Architecture boards into boards.cfg

[platform/kernel/u-boot.git] / include / configs / bf548-ezkit.h

diff --git a/include/configs/bf548-ezkit.h b/include/configs/bf548-ezkit.h
index ae9fb36..4412177 100644 (file)
--- a/include/configs/bf548-ezkit.h
+++ b/include/configs/bf548-ezkit.h
@@ -5,13 +5,12 @@
 #ifndef __CONFIG_BF548_EZKIT_H__
 #define __CONFIG_BF548_EZKIT_H__
 
-#include <asm/blackfin-config-pre.h>
+#include <asm/config-pre.h>
 
 
 /*
  * Processor Settings
  */
-#define CONFIG_BFIN_CPU             bf548-0.0
 #define CONFIG_BFIN_BOOT_MODE       BFIN_BOOT_PARA
 
 
@@ -61,7 +60,7 @@
 #define CONFIG_EBIU_FCTL_VAL   (BCLK_4)
 #define CONFIG_EBIU_MODE_VAL   (B0MODE_FLASH)
 
-#define CONFIG_SYS_MONITOR_LEN (768 * 1024)
+#define CONFIG_SYS_MONITOR_LEN (1024 * 1024)
 #define CONFIG_SYS_MALLOC_LEN  (768 * 1024)
 
 
@@ -69,9 +68,10 @@
  * Network Settings
  */
 #define ADI_CMDS_NETWORK       1
-#define CONFIG_DRIVER_SMC911X  1
-#define CONFIG_DRIVER_SMC911X_BASE     0x24000000
-#define CONFIG_DRIVER_SMC911X_16_BIT
+#define CONFIG_NET_MULTI
+#define CONFIG_SMC911X 1
+#define CONFIG_SMC911X_BASE    0x24000000
+#define CONFIG_SMC911X_16_BIT
 #define CONFIG_HOSTNAME                bf548-ezkit
 /* Uncomment next line to use fixed MAC address */
 /* #define CONFIG_ETHADDR      02:80:ad:20:31:e8 */
@@ -93,7 +93,7 @@
  */
 #define CONFIG_BFIN_SPI
 #define CONFIG_ENV_SPI_MAX_HZ  30000000
-#define CONFIG_SF_DEFAULT_HZ   30000000
+#define CONFIG_SF_DEFAULT_SPEED        30000000
 #define CONFIG_SPI_FLASH
 #define CONFIG_SPI_FLASH_STMICRO
 
@@ -106,7 +106,7 @@
 #define CONFIG_ENV_OFFSET      0x10000
 #define CONFIG_ENV_SIZE                0x2000
 #define CONFIG_ENV_SECT_SIZE   0x10000
-#define ENV_IS_EMBEDDED_CUSTOM
+#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
 #elif (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND)
 #define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_OFFSET      0x40000
@@ -117,7 +117,7 @@
 #define CONFIG_ENV_OFFSET      0x2000
 #define CONFIG_ENV_SIZE                0x2000
 #define CONFIG_ENV_SECT_SIZE   (128 * 1024)
-#define ENV_IS_EMBEDDED_CUSTOM
+#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
 #endif
 
 
@@ -132,7 +132,6 @@
 #define CONFIG_SYS_NAND_BASE           0 /* not actually used */
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define NAND_MAX_CHIPS         1
-#define CONFIG_CMD_NAND
 
 
 /*
@@ -140,8 +139,6 @@
  */
 #define CONFIG_BFIN_TWI_I2C    1
 #define CONFIG_HARD_I2C                1
-#define CONFIG_SYS_I2C_SPEED   50000
-#define CONFIG_SYS_I2C_SLAVE   0
 
 
 /*
@@ -161,6 +158,7 @@
  * SDH Settings
  */
 #if !defined(__ADSPBF544__)
+#define CONFIG_GENERIC_MMC
 #define CONFIG_MMC
 #define CONFIG_BFIN_SDH
 #endif
@@ -184,6 +182,7 @@
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_RTC_BFIN
 #define CONFIG_UART_CONSOLE    1
+#define CONFIG_BFIN_SPI_IMG_SIZE 0x50000
 
 #ifndef __ADSPBF542__
 /* Don't waste time transferring a logo over the UART */
@@ -206,6 +205,4 @@
  */
 #include <configs/bfin_adi_common.h>
 
-#include <asm/blackfin-config-post.h>
-
 #endif