#define PHYS_SDRAM_1 V2M_BASE
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x80000)
/*
* Initial SP before reloaction is placed at end of first DRAM bank,
*/
#define CONFIG_SYS_BOOTM_LEN 0x01800000
-/* Env configuration */
-#define CONFIG_SYS_MMC_ENV_DEV 0
-#define CONFIG_SYS_MMC_ENV_PART 0
-
/* Access eMMC Boot_1 and Boot_2 partitions */
#define CONFIG_SUPPORT_EMMC_BOOT
"run bootcmd_usb || "\
"run bootcmd_pxe"
+/* Flashing commands */
+#define TFTP_QSPI_PARAM \
+ "fip_qspi_addr=0x0\0"\
+ "fip_qspi_mirror_addr=0x200000\0"\
+ "loadaddr=0x90000000\0"\
+ "tftpblocksize=1468\0"\
+ "qspi_flash_fip=fip\0"\
+
+/* Flash fit_GPT partition to eMMC */
+#define MMC_FLASH_FIT_GPT \
+ "mmc_flash_gpt="\
+ "if mmc dev ${sd_device_number}; then "\
+ "else "\
+ "echo [mmc_flash_gpt] mmc dev ${sd_device_number} "\
+ "** FAILED **;"\
+ "exit;"\
+ "fi;"\
+ "if gpt write mmc ${sd_device_number} ${fit_partitions}; then "\
+ "else "\
+ "echo [mmc_flash_gpt] gpt write ${fit_partitions} "\
+ "** FAILED **;"\
+ "exit;"\
+ "fi \0"
+
+#define MMC_FLASH_IMAGE_RSA \
+ "mmc_flash_image_rsa="\
+ "if mmc dev ${sd_device_number}; then "\
+ "else "\
+ "echo [mmc_flash_image_rsa] mmc dev ${sd_device_number} "\
+ "** FAILED **;"\
+ "exit;"\
+ "fi;"\
+ "if gpt setenv mmc ${sd_device_number} ${fit_image}; then "\
+ "else "\
+ "echo [mmc_flash_image_rsa] gpt setenv ${fit_image} "\
+ "** FAILED **;"\
+ "exit;"\
+ "fi;"\
+ "if tftp ${loadaddr} ${tftp_dir}${fit_image}; then "\
+ "if test ${fit_image} = Image_rsa.img; then "\
+ "if setenv tftp_fit_image yes; then "\
+ "else "\
+ "echo [mmc_flash_image_rsa] "\
+ "setenv tftp_fit_image to yes"\
+ "** FAILED **;"\
+ "exit;"\
+ "fi;"\
+ "fi;"\
+ "else "\
+ "if test ${fit_image} = Image_rsa.img; then "\
+ "echo [mmc_flash_image_rsa] tftp "\
+ "${tftp_dir}${fit_image} ** FAILED **;"\
+ "else "\
+ "if test ${tftp_fit_image} = yes; then "\
+ "if mmc write ${loadaddr} "\
+ "${gpt_partition_addr} "\
+ "${fileblocks}; then "\
+ "else "\
+ "echo "\
+ "[mmc_flash_image_rsa] "\
+ "mmc write "\
+ "${gpt_partition_addr} "\
+ "** FAILED **;"\
+ "exit;"\
+ "fi;"\
+ "else "\
+ "echo [mmc_flash_image_rsa] tftp "\
+ "${tftp_dir}${fit_image} "\
+ "** FAILED **;"\
+ "fi;"\
+ "fi;"\
+ "exit;"\
+ "fi;"\
+ "if math add filesize filesize 1FF; then "\
+ "else "\
+ "echo [mmc_flash_image_rsa] math add command ** FAILED **;"\
+ "exit;"\
+ "fi;"\
+ "if math div fileblocks filesize 200; then "\
+ "else "\
+ "echo [mmc_flash_image_rsa] math div command ** FAILED **;"\
+ "exit;"\
+ "fi;"\
+ "if mmc write ${loadaddr} ${gpt_partition_addr} ${fileblocks}; then "\
+ "else "\
+ "echo [mmc_flash_image_rsa] mmc write ${gpt_partition_addr} "\
+ "** FAILED **;"\
+ "exit;"\
+ "fi;"\
+ "if setenv image_sz_blk_cnt ${fileblocks}; then "\
+ "else "\
+ "echo [mmc_flash_image_rsa] setenv image_sz_blk_cnt ** "\
+ "FAILED **;"\
+ "exit;"\
+ "fi;"\
+ "if saveenv; then "\
+ "else "\
+ "echo [mmc_flash_image_rsa] saveenv command ** FAILED **;"\
+ "exit;"\
+ "fi \0"
+
+#define MMC_FLASH_RECOVERY \
+ "mmc_flash_recovery="\
+ "if mmc dev ${sd_device_number}; then "\
+ "else "\
+ "echo [mmc_flash_recovery] mmc dev ${sd_device_number} "\
+ "** FAILED **;"\
+ "exit;"\
+ "fi;"\
+ "if gpt setenv mmc ${sd_device_number} recovery; then "\
+ "else "\
+ "echo [mmc_flash_recovery] gpt setenv recovery ** FAILED **;"\
+ "exit;"\
+ "fi;"\
+ "setenv index 1;"\
+ "while tftp ${loadaddr} "\
+ "${tftp_dir}${gpt_partition_name}/chunk_00${index}; do "\
+ "if math add filesize filesize 1FF; then "\
+ "else "\
+ "echo [mmc_flash_recovery] math add command "\
+ "** FAILED **;"\
+ "exit;"\
+ "fi;"\
+ "if math div fileblocks filesize 200; then "\
+ "else "\
+ "echo [mmc_flash_recovery] math div command "\
+ "** FAILED **;"\
+ "exit;"\
+ "fi;"\
+ "if mmc write ${loadaddr} ${gpt_partition_addr} "\
+ "${fileblocks}; then "\
+ "else "\
+ "echo [mmc_flash_recovery] mmc write "\
+ "${gpt_partition_addr} ** FAILED **;"\
+ "exit;"\
+ "fi;"\
+ "if math add index index 1; then "\
+ "else "\
+ "echo [mmc_flash_recovery] math add command "\
+ "** FAILED **;"\
+ "exit;"\
+ "fi;"\
+ "if math add gpt_partition_addr gpt_partition_addr"\
+ " ${fileblocks}; then "\
+ "else "\
+ "echo [mmc_flash_recovery] math add command"\
+ " ** FAILED **;"\
+ "exit;"\
+ "fi;"\
+ "done;"\
+ "if itest ${index} -ne 1; then "\
+ "else "\
+ "echo [mmc_flash_recovery] "\
+ "${tftp_dir}${gpt_partition_name}/chunk_00${index} file "\
+ "not found ** FAILED **;"\
+ "exit;"\
+ "fi \0"
+
+#define MMC_FLASH_ROOTFS \
+ "mmc_flash_rootfs="\
+ "if mmc dev ${sd_device_number}; then "\
+ "else "\
+ "echo [mmc_flash_rootfs] mmc dev ${sd_device_number} "\
+ "** FAILED **;"\
+ "exit;"\
+ "fi;"\
+ "if gpt setenv mmc ${sd_device_number} rootfs; then "\
+ "else "\
+ "echo [mmc_flash_rootfs] gpt setenv rootfs ** FAILED **;"\
+ "exit;"\
+ "fi;"\
+ "setenv index 1;"\
+ "while tftp ${loadaddr} "\
+ "${tftp_dir}${gpt_partition_name}/chunk_00${index}; do "\
+ "if math add filesize filesize 1FF; then "\
+ "else "\
+ "echo [mmc_flash_rootfs] math add command "\
+ "** FAILED **;"\
+ "exit;"\
+ "fi;"\
+ "if math div fileblocks filesize 200; then "\
+ "else "\
+ "echo [mmc_flash_rootfs] math div command "\
+ "** FAILED **;"\
+ "exit;"\
+ "fi;"\
+ "if mmc write ${loadaddr} ${gpt_partition_addr} "\
+ "${fileblocks}; then "\
+ "else "\
+ "echo [mmc_flash_rootfs] mmc write "\
+ "${gpt_partition_addr} ** FAILED **;"\
+ "exit;"\
+ "fi;"\
+ "if math add index index 1; then "\
+ "else "\
+ "echo [mmc_flash_rootfs] math add command "\
+ "** FAILED **;"\
+ "exit;"\
+ "fi;"\
+ "if math add gpt_partition_addr gpt_partition_addr"\
+ " ${fileblocks}; then "\
+ "else "\
+ "echo [mmc_flash_rootfs] math add command"\
+ " ** FAILED **;"\
+ "exit;"\
+ "fi;"\
+ "done;"\
+ "if itest ${index} -ne 1; then "\
+ "else "\
+ "echo [mmc_flash_rootfs] "\
+ "${tftp_dir}${gpt_partition_name}/chunk_00${index} file "\
+ "not found ** FAILED **;"\
+ "exit;"\
+ "fi \0"
+
+/*
+ * For individual flash commands like mmc_flash_gpt, it is not
+ * necessary to check for errors.
+ * If any of its intermediate commands fails, then next commands
+ * will not execute. Script will exit from the failure command.
+ * For uniformity, checking for mmc_flash_gpt, mmc_flash_image_rsa
+ * mmc_flash_nitro and mmc_flash_rootfs
+ */
+#define MMC_FLASH \
+ "flash_mmc="\
+ "if run mmc_flash_gpt; then "\
+ "else "\
+ "echo [flash_mmc] run mmc_flash_gpt ** FAILED **;"\
+ "exit;"\
+ "fi;"\
+ "if setenv tftp_fit_image no; then "\
+ "else "\
+ "echo [flash_mmc] setenv tftp_fit_image to no "\
+ "** FAILED **;"\
+ "exit;"\
+ "fi;"\
+ "if setenv fit_image Image_rsa.img; then "\
+ "else "\
+ "echo [flash_mmc] setenv fit_image to Image_rsa.img "\
+ "** FAILED **;"\
+ "exit;"\
+ "fi;"\
+ "if run mmc_flash_image_rsa; then "\
+ "else "\
+ "echo [flash_mmc] run mmc_flash_image_rsa ** FAILED **;"\
+ "exit;"\
+ "fi;"\
+ "if setenv fit_image Image1_rsa.img; then "\
+ "else "\
+ "echo [flash_mmc] setenv fit_image to Image1_rsa.img "\
+ "** FAILED **;"\
+ "exit;"\
+ "fi;"\
+ "if run mmc_flash_image_rsa; then "\
+ "else "\
+ "echo [flash_mmc] run mmc_flash_image_rsa "\
+ "for Image1_rsa.img ** FAILED **;"\
+ "exit;"\
+ "fi;"\
+ "if setenv fit_image Image2_rsa.img; then "\
+ "else "\
+ "echo [flash_mmc] setenv fit_image to Image2_rsa.img "\
+ "** FAILED **;"\
+ "exit;"\
+ "fi;"\
+ "if run mmc_flash_image_rsa; then "\
+ "else "\
+ "echo [flash_mmc] run mmc_flash_image_rsa "\
+ "for Image2_rsa.img ** FAILED **;"\
+ "exit;"\
+ "fi;"\
+ "if run mmc_flash_recovery; then "\
+ "else "\
+ "echo [flash_mmc] run mmc_flash_recovery ** FAILED **;"\
+ "exit;"\
+ "fi;"\
+ "if run mmc_flash_rootfs; then "\
+ "else "\
+ "echo [flash_mmc] run mmc_flash_rootfs ** FAILED **;"\
+ "exit;"\
+ "fi \0"
+
+#define FUNC_ALIGN_QSPI_ERASE_BLOCK_SIZE \
+ "align_erase_blk_size=" \
+ "setenv fl_write_size 0;" \
+ "if math add fl_write_size filesize FFFF; then "\
+ "else "\
+ "echo ${errstr} math add command ** FAILED **;"\
+ "exit;"\
+ "fi;"\
+ "if math div fl_write_size fl_write_size 10000; then "\
+ "else "\
+ "echo ${errstr} math div command ** FAILED **;"\
+ "exit;"\
+ "fi;"\
+ "if math mul fl_write_size fl_write_size 10000; then "\
+ "else "\
+ "echo ${errstr} math mul command ** FAILED **;"\
+ "exit;"\
+ "fi \0"
+
+#define QSPI_FLASH_FIP \
+ "flash_fip="\
+ "if run qspi_access_en; then "\
+ "else "\
+ "echo [flash_fip] run qspi_access_en ** FAILED **;"\
+ "exit;"\
+ "fi;"\
+ "if tftp ${loadaddr} ${tftp_dir}fip.bin; then "\
+ "else "\
+ "echo [flash_fip] tftp ${tftp_dir}fip.bin "\
+ "** FAILED **;"\
+ "exit;"\
+ "fi;"\
+ "if math add tmpsize filesize FFFF; then "\
+ "else "\
+ "echo [flash_fip] math add command ** FAILED **;"\
+ "exit;"\
+ "fi;"\
+ "if math div tmpsize tmpsize 10000; then "\
+ "else "\
+ "echo [flash_fip] math div command ** FAILED **;"\
+ "exit;"\
+ "fi;"\
+ "if math mul tmpsize tmpsize 10000; then "\
+ "else "\
+ "echo [flash_fip] math mul command ** FAILED **;"\
+ "exit;"\
+ "fi;"\
+ "if sf probe 0; then "\
+ "else "\
+ "echo [flash_fip] sf probe command ** FAILED **;"\
+ "exit;"\
+ "fi;"\
+ "if sf erase ${fip_qspi_addr} ${tmpsize}; then "\
+ "else "\
+ "echo [flash_fip] sf erase ${fip_qspi_addr} ** FAILED **;"\
+ "exit;"\
+ "fi;"\
+ "if sf write ${loadaddr} ${fip_qspi_addr} ${filesize}; then "\
+ "else "\
+ "echo [flash_fip] sf write ${fip_qspi_addr} ** FAILED **;"\
+ "exit;"\
+ "fi;"\
+ /* Flash mirror FIP image */ \
+ "if sf erase ${fip_qspi_mirror_addr} ${tmpsize}; then "\
+ "else "\
+ "echo [flash_fip] sf erase ${fip_qspi_mirror_addr} "\
+ "** FAILED **;"\
+ "exit;"\
+ "fi;"\
+ "if sf write ${loadaddr} ${fip_qspi_mirror_addr} ${filesize}; then "\
+ "else "\
+ "echo [flash_fip] sf write ${fip_qspi_mirror_addr} "\
+ "** FAILED **;"\
+ "exit;"\
+ "fi \0"
+
+#define QSPI_FLASH_NITRO \
+ "flash_nitro="\
+ "run func_qspi_probe; "\
+ "if tftp ${loadaddr} ${tftp_dir}${nitro_bin}; then "\
+ "else "\
+ "echo [flash_nitro] tftp ${tftp_dir}${nitro_bin} "\
+ "** FAILED **;"\
+ "exit;"\
+ "fi;"\
+ "setenv errstr flash_nitro;" \
+ "run align_erase_blk_size;" \
+ /* Flash Nitro fw fit + configuration */ \
+ "if sf erase ${spi_nitro_img_bin_start} ${fl_write_size}; then "\
+ "else "\
+ "echo [flash_nitro] sf erase ${spi_nitro_img_bin_start} "\
+ "** FAILED **;"\
+ "exit;"\
+ "fi;"\
+ "if sf write ${loadaddr} ${spi_nitro_img_bin_start}" \
+ " ${fl_write_size}; then "\
+ "else "\
+ "echo [flash_nitro] sf write ${spi_nitro_bin_start} "\
+ "** FAILED **;"\
+ "exit;"\
+ "fi;"\
+ /* Mirror of Flash Nitro fw fit + configuration */ \
+ "if sf erase ${spi_nitro_img_bin_mirror_start} ${fl_write_size}; then "\
+ "else "\
+ "echo [flash_nitro] sf erase "\
+ "${spi_nitro_img_bin_mirror_start} "\
+ "** FAILED **;"\
+ "exit;"\
+ "fi;"\
+ "if sf write ${loadaddr} ${spi_nitro_img_bin_mirror_start}" \
+ " ${fl_write_size}; then "\
+ "else "\
+ "echo [flash_nitro] sf write "\
+ "${spi_nitro_img_bin_mirror_start} "\
+ "** FAILED **;"\
+ "exit;"\
+ "fi \0"
+
+#define QSPI_FLASH_NITRO_BSPD_CONFIG \
+ "flash_nitro_bspd_config="\
+ "run func_qspi_probe; "\
+ /* Flash BSPD configuration */ \
+ "if tftp ${loadaddr} ${tftp_dir}${nitro_bspd_cfg}; then "\
+ "setenv bspd_cfg_avialable 1; "\
+ "setenv errstr flash_nitro_bspd_config; "\
+ "run align_erase_blk_size;" \
+ "if sf erase ${spi_nitro_bspd_cfg_start} "\
+ "${fl_write_size}; then "\
+ "else "\
+ "echo [flash_nitro] sf erase "\
+ "${spi_nitro_bspd_cfg_start} "\
+ "** FAILED **;"\
+ "exit;"\
+ "fi;"\
+ "if sf write ${loadaddr} ${spi_nitro_bspd_cfg_start} "\
+ "${fl_write_size}; then "\
+ "else "\
+ "echo [flash_nitro] sf write "\
+ "${spi_nitro_bspd_cfg_start} "\
+ "** FAILED **;"\
+ "exit;"\
+ "fi;" \
+ /* Flash BSPD mirror configuration */ \
+ "if sf erase ${spi_nitro_bspd_mirror_cfg_start} "\
+ "${fl_write_size}; then "\
+ "else "\
+ "echo [flash_nitro] sf erase "\
+ "${spi_nitro_bspd_mirror_cfg_start} "\
+ "** FAILED **;"\
+ "exit;"\
+ "fi;"\
+ "if sf write ${loadaddr} ${spi_nitro_bspd_mirror_cfg_start} "\
+ "${fl_write_size}; then "\
+ "else "\
+ "echo [flash_nitro] sf write "\
+ "${spi_nitro_bspd_mirror_cfg_start} "\
+ "** FAILED **;"\
+ "exit;"\
+ "fi;" \
+ "else "\
+ "echo [flash_nitro] tftp ${tftp_dir}${nitro_bspd_cfg} "\
+ "** Skip flashing bspd config file **;"\
+ "fi \0"
+
+#define QSPI_FLASH \
+ "flash_qspi="\
+ "if run qspi_access_en; then "\
+ "else "\
+ "echo [flash_qspi] run qspi_access_en ** FAILED **;"\
+ "exit;"\
+ "fi;"\
+ "if run flash_fip; then "\
+ "else "\
+ "echo [flash_qspi] run flash_fip ** FAILED **;"\
+ "exit;"\
+ "fi;"\
+ "if run flash_nitro; then "\
+ "else "\
+ "echo [flash_qspi] run flash_nitro ** FAILED **;"\
+ "exit;"\
+ "fi \0"
+
+#define FLASH_IMAGES \
+ "flash_images=" \
+ "if run flash_qspi; then "\
+ "else "\
+ "echo [flash_images] run flash_qspi ** FAILED **;"\
+ "exit;"\
+ "fi;"\
+ "if run flash_mmc; then "\
+ "else "\
+ "echo [flash_images] run flash_mmc ** FAILED **;"\
+ "exit;"\
+ "fi \0"
+
#define ARCH_ENV_SETTINGS \
CONSOLE_ARGS \
MAX_CPUS \
START_PCI \
BNXT_LOAD \
BOOTCMD_PXE \
- FLASH_PENDING_RFS_IMGS
+ FLASH_PENDING_RFS_IMGS \
+ TFTP_QSPI_PARAM \
+ MMC_FLASH_FIT_GPT \
+ MMC_FLASH_IMAGE_RSA \
+ MMC_FLASH_RECOVERY \
+ MMC_FLASH_ROOTFS \
+ MMC_FLASH \
+ FUNC_ALIGN_QSPI_ERASE_BLOCK_SIZE \
+ QSPI_FLASH_FIP \
+ QSPI_FLASH_NITRO \
+ QSPI_FLASH_NITRO_BSPD_CONFIG \
+ QSPI_FLASH \
+ FLASH_IMAGES
#define CONFIG_EXTRA_ENV_SETTINGS \
ARCH_ENV_SETTINGS
projects / platform / kernel / u-boot.git / blobdiff