[PATCH] Update some AMCC 4xx board config files (set initrd_high)

[platform/kernel/u-boot.git] / include / configs / bamboo.h

diff --git a/include/configs/bamboo.h b/include/configs/bamboo.h
index eacc744..bcc736c 100644 (file)
--- a/include/configs/bamboo.h
+++ b/include/configs/bamboo.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2005
+ * (C) Copyright 2005-2006
  * Stefan Roese, DENX Software Engineering, sr@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -43,12 +43,13 @@
  * 2nd ethernet port you have to "undef" the following define.
  */
 #define CONFIG_BAMBOO_NAND      1       /* enable nand flash support    */
+#define CFG_NAND_LEGACY
 
 /*-----------------------------------------------------------------------
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  *----------------------------------------------------------------------*/
-#define CFG_MONITOR_LEN                (512 * 1024)    /* Reserve 512 kB for Monitor   */
+#define CFG_MONITOR_LEN                (384 * 1024)    /* Reserve 384 kB for Monitor   */
 #define CFG_MALLOC_LEN         (256 * 1024)    /* Reserve 256 kB for malloc()  */
 #define CFG_MONITOR_BASE       (-CFG_MONITOR_LEN)
 #define CFG_SDRAM_BASE         0x00000000          /* _must_ be 0      */
@@ -72,6 +73,7 @@
 /*-----------------------------------------------------------------------
  * Initial RAM & stack pointer (placed in SDRAM)
  *----------------------------------------------------------------------*/
+#define CFG_INIT_RAM_DCACHE    1               /* d-cache as init ram  */
 #define CFG_INIT_RAM_ADDR      0x70000000              /* DCache       */
 #define CFG_INIT_RAM_END       (4 << 10)
 #define CFG_GBL_DATA_SIZE      256                     /* num bytes initial data       */
@@ -255,9 +257,10 @@
        "bootfile=/tftpboot/bamboo/uImage\0"                            \
        "kernel_addr=fff00000\0"                                        \
        "ramdisk_addr=fff10000\0"                                       \
+       "initrd_high=30000000\0"                                        \
        "load=tftp 100000 /tftpboot/bamboo/u-boot.bin\0"                \
-       "update=protect off fff80000 ffffffff;era fff80000 ffffffff;"   \
-               "cp.b 100000 fff80000 80000;"                           \
+       "update=protect off fffa0000 ffffffff;era fffa0000 ffffffff;"   \
+               "cp.b 100000 fffa0000 60000;"                           \
                "setenv filesize;saveenv\0"                             \
        "upd=run load;run update\0"                                     \
        ""
@@ -309,11 +312,11 @@
 
 #define CONFIG_COMMANDS               (CONFIG_CMD_DFL  | \
                                CFG_CMD_ASKENV  | \
-                               CFG_CMD_EEPROM  | \
                                CFG_CMD_DATE    | \
                                CFG_CMD_DHCP    | \
                                CFG_CMD_DIAG    | \
                                CFG_CMD_ELF     | \
+                               CFG_CMD_EEPROM  | \
                                CFG_CMD_I2C     | \
                                CFG_CMD_IRQ     | \
                                CFG_CMD_MII     | \
@@ -357,6 +360,12 @@
 
 #define CFG_HZ                 1000    /* decrementer freq: 1 ms ticks */
 
+#define CONFIG_CMDLINE_EDITING 1       /* add command line history     */
+#define CONFIG_LOOPW            1       /* enable loopw command         */
+#define CONFIG_MX_CYCLIC        1       /* enable mdc/mwc commands      */
+#define CONFIG_ZERO_BOOTDELAY_CHECK    /* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1      /* include version env variable */
+
 /*-----------------------------------------------------------------------
  * PCI stuff
  *-----------------------------------------------------------------------