#include <linux/sizes.h>
#include <configs/ti_am335x_common.h>
-#define CONFIG_MACH_TYPE MACH_TYPE_AM335XEVM
-
/* Clock Defines */
#define V_OSCK 24000000 /* Clock output from T2 */
#define V_SCLK (V_OSCK)
-/* Custom script for NOR */
-#define CONFIG_SYS_LDSCRIPT "board/vscom/baltos/u-boot.lds"
-
-/* Always 128 KiB env size */
-#define CONFIG_ENV_SIZE (128 << 10)
-
/* FIT support */
-#define CONFIG_SYS_BOOTM_LEN SZ_64M
-#ifdef CONFIG_NAND
+#ifdef CONFIG_MTD_RAW_NAND
#define NANDARGS \
- "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
- "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
"nandargs=setenv bootargs console=${console} " \
"${optargs} " \
"${mtdparts} " \
"root=${nandroot} " \
"rootfstype=${nandrootfstype}\0" \
"nandroot=ubi0:rootfs rw ubi.mtd=5\0" \
- "nandrootfstype=ubifs rootwait=1\0" \
+ "nandrootfstype=ubifs rootwait\0" \
"nandboot=echo Booting from nand ...; " \
"run nandargs; " \
"setenv loadaddr 0x84000000; " \
#define NANDARGS ""
#endif
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
DEFAULT_LINUX_BOOT_ENV \
"boot_fdt=try\0" \
"bootpart=0:2\0" \
"findfdt=setenv fdtfile am335x-baltos.dtb\0" \
NANDARGS
/*DFUARGS*/
-#endif
-
-#define CONFIG_BOOTCOMMAND \
- "run findfdt; " \
- "run usbboot;" \
- "run mmcboot;" \
- "setenv mmcdev 1; " \
- "setenv bootpart 1:2; " \
- "run mmcboot;" \
- "run nandboot;"
/* NS16550 Configuration */
-#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */
-#define CONFIG_SYS_NS16550_COM2 0x48022000 /* UART1 */
-#define CONFIG_SYS_NS16550_COM3 0x48024000 /* UART2 */
-#define CONFIG_SYS_NS16550_COM4 0x481a6000 /* UART3 */
-#define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */
-#define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */
-
-#define CONFIG_ENV_EEPROM_IS_ON_I2C
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
-
-/* PMIC support */
-#define CONFIG_POWER_TPS65910
+#define CFG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */
+#define CFG_SYS_NS16550_COM2 0x48022000 /* UART1 */
+#define CFG_SYS_NS16550_COM3 0x48024000 /* UART2 */
+#define CFG_SYS_NS16550_COM4 0x481a6000 /* UART3 */
+#define CFG_SYS_NS16550_COM5 0x481a8000 /* UART4 */
+#define CFG_SYS_NS16550_COM6 0x481aa000 /* UART5 */
/* SPL */
#ifndef CONFIG_NOR_BOOT
-#ifdef CONFIG_NAND
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \
- CONFIG_SYS_NAND_PAGE_SIZE)
-#define CONFIG_SYS_NAND_PAGE_SIZE 2048
-#define CONFIG_SYS_NAND_OOBSIZE 64
-#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
-#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
+#ifdef CONFIG_MTD_RAW_NAND
+#define CFG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
10, 11, 12, 13, 14, 15, 16, 17, \
18, 19, 20, 21, 22, 23, 24, 25, \
26, 27, 28, 29, 30, 31, 32, 33, \
42, 43, 44, 45, 46, 47, 48, 49, \
50, 51, 52, 53, 54, 55, 56, 57, }
-#define CONFIG_SYS_NAND_ECCSIZE 512
-#define CONFIG_SYS_NAND_ECCBYTES 14
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW
-#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
+#define CFG_SYS_NAND_ECCSIZE 512
+#define CFG_SYS_NAND_ECCBYTES 14
+#define CFG_SYS_NAND_U_BOOT_START CONFIG_TEXT_BASE
#endif
#endif
-/*
- * USB configuration. We enable MUSB support, both for host and for
- * gadget. We set USB0 as peripheral and USB1 as host, based on the
- * board schematic and physical port wired to each. Then for host we
- * add mass storage support and for gadget we add both RNDIS ethernet
- * and DFU.
- */
-#define CONFIG_AM335X_USB0
-#define CONFIG_AM335X_USB0_MODE MUSB_HOST
-#define CONFIG_AM335X_USB1
-#define CONFIG_AM335X_USB1_MODE MUSB_OTG
-
/* NAND support */
-#ifdef CONFIG_NAND
+#ifdef CONFIG_MTD_RAW_NAND
#define GPMC_NAND_ECC_LP_x8_LAYOUT 1
#endif