Convert CONFIG_PCI_GT64120 to Kconfig

[platform/kernel/u-boot.git] / include / configs / baltos.h

diff --git a/include/configs/baltos.h b/include/configs/baltos.h
index 2fe6c86..25906e4 100644 (file)
--- a/include/configs/baltos.h
+++ b/include/configs/baltos.h
@@ -29,15 +29,13 @@
 #ifdef CONFIG_MTD_RAW_NAND
 
 #define NANDARGS \
-       "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
-       "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
        "nandargs=setenv bootargs console=${console} " \
                "${optargs} " \
                "${mtdparts} " \
                "root=${nandroot} " \
                "rootfstype=${nandrootfstype}\0" \
        "nandroot=ubi0:rootfs rw ubi.mtd=5\0" \
-       "nandrootfstype=ubifs rootwait=1\0" \
+       "nandrootfstype=ubifs rootwait\0" \
        "nandboot=echo Booting from nand ...; " \
                "run nandargs; " \
                "setenv loadaddr 0x84000000; " \
@@ -52,7 +50,6 @@
 #define NANDARGS ""
 #endif
 
-#ifndef CONFIG_SPL_BUILD
 #define CONFIG_EXTRA_ENV_SETTINGS \
        DEFAULT_LINUX_BOOT_ENV \
        "boot_fdt=try\0" \
@@ -183,16 +180,6 @@
        "findfdt=setenv fdtfile am335x-baltos.dtb\0" \
        NANDARGS
        /*DFUARGS*/
-#endif
-
-#define CONFIG_BOOTCOMMAND \
-       "run findfdt; " \
-       "run usbboot;" \
-       "run mmcboot;" \
-       "setenv mmcdev 1; " \
-       "setenv bootpart 1:2; " \
-       "run mmcboot;" \
-       "run nandboot;"
 
 /* NS16550 Configuration */
 #define CONFIG_SYS_NS16550_COM1                0x44e09000      /* Base EVM has UART0 */
@@ -209,13 +196,6 @@
 #ifndef CONFIG_NOR_BOOT
 
 #ifdef CONFIG_MTD_RAW_NAND
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_PAGE_COUNT     (CONFIG_SYS_NAND_BLOCK_SIZE / \
-                                        CONFIG_SYS_NAND_PAGE_SIZE)
-#define CONFIG_SYS_NAND_PAGE_SIZE      2048
-#define CONFIG_SYS_NAND_OOBSIZE                64
-#define CONFIG_SYS_NAND_BLOCK_SIZE     (128*1024)
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS  NAND_LARGE_BADBLOCK_POS
 #define CONFIG_SYS_NAND_ECCPOS         { 2, 3, 4, 5, 6, 7, 8, 9, \
                                         10, 11, 12, 13, 14, 15, 16, 17, \
                                         18, 19, 20, 21, 22, 23, 24, 25, \
@@ -226,24 +206,10 @@
 
 #define CONFIG_SYS_NAND_ECCSIZE                512
 #define CONFIG_SYS_NAND_ECCBYTES       14
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-#define CONFIG_NAND_OMAP_ECCSCHEME     OMAP_ECC_BCH8_CODE_HW
 #define CONFIG_SYS_NAND_U_BOOT_START   CONFIG_SYS_TEXT_BASE
 #endif
 #endif
 
-/*
- * USB configuration.  We enable MUSB support, both for host and for
- * gadget.  We set USB0 as peripheral and USB1 as host, based on the
- * board schematic and physical port wired to each.  Then for host we
- * add mass storage support and for gadget we add both RNDIS ethernet
- * and DFU.
- */
-#define CONFIG_AM335X_USB0
-#define CONFIG_AM335X_USB0_MODE        MUSB_HOST
-#define CONFIG_AM335X_USB1
-#define CONFIG_AM335X_USB1_MODE MUSB_OTG
-
 /* NAND support */
 #ifdef CONFIG_MTD_RAW_NAND
 #define GPMC_NAND_ECC_LP_x8_LAYOUT     1