#define CONFIG_MTD_DEVICE
/* I2C configuration */
-#undef CONFIG_SYS_OMAP24_I2C_SPEED
-#define CONFIG_SYS_OMAP24_I2C_SPEED 1000
#ifdef CONFIG_NAND
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x00080000
#ifdef CONFIG_SPL_OS_BOOT
#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 /* kernel offset */
-#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000
#endif
#define NANDARGS \
- "mtdids=" MTDIDS_DEFAULT "\0" \
- "mtdparts=" MTDPARTS_DEFAULT "\0" \
+ "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
+ "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
"nandargs=setenv bootargs console=${console} " \
"${optargs} " \
"${mtdparts} " \
/* SPL */
#ifndef CONFIG_NOR_BOOT
-/* Bootcount using the RTC block */
-#define CONFIG_BOOTCOUNT_LIMIT
-#define CONFIG_BOOTCOUNT_AM33XX
/* USB gadget RNDIS */
/* General network SPL, both CPSW and USB gadget RNDIS */
#define CONFIG_SPL_NET_VCI_STRING "AM335x U-Boot SPL"*/
-#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds"
-
#ifdef CONFIG_NAND
-#define CONFIG_NAND_OMAP_GPMC
-#define CONFIG_NAND_OMAP_GPMC_PREFETCH
-#define CONFIG_NAND_OMAP_ELM
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \
CONFIG_SYS_NAND_PAGE_SIZE)
* add mass storage support and for gadget we add both RNDIS ethernet
* and DFU.
*/
-#define CONFIG_USB_MUSB_DSPS
-#define CONFIG_USB_MUSB_PIO_ONLY
#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
#define CONFIG_AM335X_USB0
#define CONFIG_AM335X_USB0_MODE MUSB_HOST
#define CONFIG_AM335X_USB1
#define CONFIG_AM335X_USB1_MODE MUSB_OTG
-#ifdef CONFIG_USB_MUSB_GADGET
-#define CONFIG_USB_ETHER
-#define CONFIG_USB_ETH_RNDIS
-#define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00"
-#endif /* CONFIG_USB_MUSB_GADGET */
-
#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USBETH_SUPPORT)
/* disable host part of MUSB in SPL */
/* disable EFI partitions and partition UUID support */
/* NAND support */
#ifdef CONFIG_NAND
#define GPMC_NAND_ECC_LP_x8_LAYOUT 1
-#if !defined(CONFIG_SPI_BOOT) && !defined(CONFIG_NOR_BOOT)
-#define MTDIDS_DEFAULT "nand0=omap2-nand.0"
-#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:128k(SPL)," \
- "128k(SPL.backup1)," \
- "128k(SPL.backup2)," \
- "128k(SPL.backup3)," \
- "1920k(u-boot)," \
- "-(UBI)"
-#endif
#endif
#endif /* ! __CONFIG_BALTOS_H */