*/
#define CFG_PLL0_OPT 0x04
-#define CFG_USART1 1
-
-#define CFG_CONSOLE_UART_DEV DEVICE_USART1
+#undef CONFIG_USART0
+#define CONFIG_USART1 1
+#undef CONFIG_USART2
+#undef CONFIG_USART3
/* User serviceable stuff */
+#define CONFIG_DOS_PARTITION 1
+
#define CONFIG_CMDLINE_TAG 1
#define CONFIG_SETUP_MEMORY_TAGS 1
#define CONFIG_INITRD_TAG 1
#define CONFIG_BAUDRATE 115200
#define CONFIG_BOOTARGS \
- "console=ttyUS0 root=/dev/mtdblock1 fbmem=600k"
-
-#define CONFIG_COMMANDS (CFG_CMD_BDI \
- | CFG_CMD_LOADS \
- | CFG_CMD_LOADB \
- /* | CFG_CMD_IMI */ \
- /* | CFG_CMD_CACHE */ \
- | CFG_CMD_FLASH \
- | CFG_CMD_MEMORY \
- /* | CFG_CMD_NET */ \
- | CFG_CMD_ENV \
- /* | CFG_CMD_IRQ */ \
- | CFG_CMD_BOOTD \
- | CFG_CMD_CONSOLE \
- /* | CFG_CMD_EEPROM */ \
- | CFG_CMD_ASKENV \
- | CFG_CMD_RUN \
- | CFG_CMD_ECHO \
- /* | CFG_CMD_I2C */ \
- | CFG_CMD_REGINFO \
- /* | CFG_CMD_DATE */ \
- /* | CFG_CMD_DHCP */ \
- /* | CFG_CMD_AUTOSCRIPT */ \
- /* | CFG_CMD_MII */ \
- | CFG_CMD_MISC \
- /* | CFG_CMD_SDRAM */ \
- /* | CFG_CMD_DIAG */ \
- /* | CFG_CMD_HWFLOW */ \
- /* | CFG_CMD_SAVES */ \
- /* | CFG_CMD_SPI */ \
- /* | CFG_CMD_PING */ \
- /* | CFG_CMD_MMC */ \
- /* | CFG_CMD_FAT */ \
- /* | CFG_CMD_IMLS */ \
- /* | CFG_CMD_ITEST */ \
- /* | CFG_CMD_EXT2 */ \
- )
-
-#include <cmd_confdefs.h>
+ "console=ttyS0 root=/dev/mtdblock1 rootfstype=jffs2 fbmem=600k"
+
+#define CONFIG_BOOTCOMMAND \
+ "fsload; bootm $(fileaddr)"
+
+/*
+ * Only interrupt autoboot if <space> is pressed. Otherwise, garbage
+ * data on the serial line may interrupt the boot sequence.
+ */
+#define CONFIG_BOOTDELAY 2
+#define CONFIG_AUTOBOOT 1
+#define CONFIG_AUTOBOOT_KEYED 1
+#define CONFIG_AUTOBOOT_PROMPT \
+ "Press SPACE to abort autoboot in %d seconds\n"
+#define CONFIG_AUTOBOOT_DELAY_STR "d"
+#define CONFIG_AUTOBOOT_STOP_STR " "
+
+/*
+ * These are "locally administered ethernet addresses" generated by
+ * ./tools/gen_eth_addr
+ *
+ * After booting the board for the first time, new addresses should be
+ * generated and assigned to the environment variables "ethaddr" and
+ * "eth1addr".
+ */
+#define CONFIG_ETHADDR "6a:87:71:14:cd:cb"
+#define CONFIG_ETH1ADDR "ca:f8:15:e6:3e:e6"
+#define CONFIG_OVERWRITE_ETHADDR_ONCE 1
+#define CONFIG_NET_MULTI 1
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_REGINFO
+
+#undef CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_SETGETDCR
+#undef CONFIG_CMD_XIMG
#define CONFIG_ATMEL_USART 1
+#define CONFIG_MACB 1
#define CONFIG_PIO2 1
#define CFG_NR_PIOS 5
#define CFG_HSDRAMC 1
+#define CONFIG_MMC 1
#define CFG_DCACHE_LINESZ 32
#define CFG_ICACHE_LINESZ 32
#define CFG_INIT_SP_ADDR (CFG_INTRAM_BASE + CFG_INTRAM_SIZE)
#define CFG_MALLOC_LEN (256*1024)
-#define CFG_MALLOC_END \
- ({ \
- DECLARE_GLOBAL_DATA_PTR; \
- CFG_SDRAM_BASE + gd->sdram_size; \
- })
-#define CFG_MALLOC_START (CFG_MALLOC_END - CFG_MALLOC_LEN)
-
#define CFG_DMA_ALLOC_LEN (16384)
-#define CFG_DMA_ALLOC_END (CFG_MALLOC_START)
-#define CFG_DMA_ALLOC_START (CFG_DMA_ALLOC_END - CFG_DMA_ALLOC_LEN)
+
/* Allow 2MB for the kernel run-time image */
#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x00200000)
#define CFG_BOOTPARAMS_LEN (16 * 1024)
projects / platform / kernel / u-boot.git / blobdiff