Merge branch 'master' of git://git.denx.de/u-boot-arm into master
[platform/kernel/u-boot.git] / include / configs / atc.h
index 24015b7..77fa79a 100644 (file)
@@ -2,23 +2,7 @@
  * (C) Copyright 2001
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
  * (easy to change)
  */
 
-#define CONFIG_MPC8260         1       /* This is an MPC8260 CPU               */
 #define CONFIG_ATC             1       /* ...on a ATC board    */
 #define CONFIG_CPM2            1       /* Has a CPM2 */
 
+#define        CONFIG_SYS_TEXT_BASE    0xFF000000
+
 /*
  * select serial console configuration
  *
@@ -70,7 +55,6 @@
 #undef CONFIG_ETHER_NONE               /* define if ether on something else */
 #define CONFIG_ETHER_ON_FCC
 
-#define        CONFIG_NET_MULTI
 #define CONFIG_ETHER_ON_FCC2
 
 /*
  * Miscellaneous configurable options
  */
 #define        CONFIG_SYS_LONGHELP                     /* undef to save memory         */
-#define        CONFIG_SYS_PROMPT       "=> "           /* Monitor Command Prompt       */
 #if defined(CONFIG_CMD_KGDB)
 #define        CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size      */
 #else
 
 #define CONFIG_SYS_PIO_MODE            0       /* IDE interface in PIO Mode 0  */
 
-#define        CONFIG_SYS_HZ           1000            /* decrementer freq: 1 ms ticks */
-
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
-
 #define        CONFIG_SYS_RESET_ADDRESS 0xFFF00100     /* "bad" address                */
 
 #define CONFIG_SYS_ALLOC_DPRAM
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
 #define CONFIG_SYS_INIT_RAM_ADDR       CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_END        0x2F00  /* End of used area in DPRAM    */
-#define CONFIG_SYS_GBL_DATA_SIZE       128 /* size in bytes reserved for initial data*/
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE       0x2F00  /* Size of used area in DPRAM    */
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  */
 #define CONFIG_SYS_SDRAM_BASE          0x00000000
 #define CONFIG_SYS_SDRAM_MAX_SIZE      0x08000000      /* max. 128 MB          */
-#define CONFIG_SYS_MONITOR_BASE        TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_MONITOR_LEN         (192 << 10)     /* Reserve 192 kB for Monitor */
 #define CONFIG_SYS_MALLOC_LEN          (128 << 10)     /* Reserve 128 kB for malloc()*/
 
 #endif
 
 #define        CONFIG_PCI
+#define CONFIG_PCI_INDIRECT_BRIDGE
 #define        CONFIG_PCI_PNP
 #define        CONFIG_SYS_PCI_MSTR_IO_BUS      0x00000000      /* PCI base   */
 
 #define CONFIG_ENV_SIZE                2048
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS      4       /* 16-byte page size    */
 #endif
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH*/
-#define BOOTFLAG_WARM          0x02    /* Software reboot                 */
-
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  *-----------------------------------------------------------------------
  */
 
+#define CONFIG_IDE_PREINIT     1       /* Use preinit IDE hook */
 #define CONFIG_IDE_8xx_PCCARD  1       /* Use IDE with PC Card Adapter */
 
 #undef CONFIG_IDE_8xx_DIRECT           /* Direct IDE    not supported  */