disk: convert CONFIG_DOS_PARTITION to Kconfig

[platform/kernel/u-boot.git] / include / configs / at91sam9x5ek.h

diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h
index b9a7754..f414023 100644 (file)
--- a/include/configs/at91sam9x5ek.h
+++ b/include/configs/at91sam9x5ek.h
@@ -23,13 +23,6 @@
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
 #define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_DISPLAY_CPUINFO
-
-#define CONFIG_CMD_BOOTZ
-#define CONFIG_OF_LIBFDT
-
-#define CONFIG_SYS_GENERIC_BOARD
 
 /* general purpose I/O */
 #define CONFIG_ATMEL_LEGACY            /* required until (g)pio is fixed */
@@ -41,7 +34,6 @@
 #define CONFIG_USART_ID                ATMEL_ID_SYS
 
 /* LCD */
-#define CONFIG_LCD
 #define LCD_BPP                        LCD_COLOR16
 #define LCD_OUTPUT_BPP         24
 #define CONFIG_LCD_LOGO
@@ -50,9 +42,7 @@
 #define CONFIG_SYS_WHITE_ON_BLACK
 #define CONFIG_ATMEL_HLCD
 #define CONFIG_ATMEL_LCD_RGB565
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
 
-#define CONFIG_BOOTDELAY       3
 
 /*
  * BOOTP options
@@ -68,20 +58,13 @@
 /*
  * Command line configuration.
  */
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_NAND
-#define CONFIG_CMD_SF
-#define CONFIG_CMD_MMC
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_USB
 
 /*
  * define CONFIG_USB_EHCI to enable USB Hi-Speed (aka 2.0)
  * NB: in this case, USB 1.1 devices won't be recognized.
  */
 
-
 /* SDRAM */
 #define CONFIG_NR_DRAM_BANKS           1
 #define CONFIG_SYS_SDRAM_BASE          0x20000000
@@ -93,7 +76,6 @@
 /* DataFlash */
 #ifdef CONFIG_CMD_SF
 #define CONFIG_ATMEL_SPI
-#define CONFIG_SPI_FLASH_ATMEL
 #define CONFIG_SF_DEFAULT_SPEED                30000000
 #endif
 
@@ -123,22 +105,15 @@
 #define CONFIG_MTD_PARTITIONS
 #define CONFIG_RBTREE
 #define CONFIG_LZO
-#define CONFIG_CMD_UBI
 #define CONFIG_CMD_UBIFS
 #endif
 
 /* MMC */
 #ifdef CONFIG_CMD_MMC
-#define CONFIG_MMC
 #define CONFIG_GENERIC_MMC
 #define CONFIG_GENERIC_ATMEL_MCI
 #endif
 
-/* FAT */
-#ifdef CONFIG_CMD_FAT
-#define CONFIG_DOS_PARTITION
-#endif
-
 /* Ethernet */
 #define CONFIG_MACB
 #define CONFIG_RMII
@@ -159,7 +134,6 @@
 #define CONFIG_SYS_USB_OHCI_SLOT_NAME          "at91sam9x5"
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS     3
 #endif
-#define CONFIG_USB_STORAGE
 #endif
 
 #define CONFIG_SYS_LOAD_ADDR           0x22000000      /* load address */
@@ -223,15 +197,11 @@
 
 #define CONFIG_BAUDRATE                115200
 
-#define CONFIG_SYS_PROMPT      "U-Boot> "
 #define CONFIG_SYS_CBSIZE      256
 #define CONFIG_SYS_MAXARGS     16
-#define CONFIG_SYS_PBSIZE      (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) \
-                                       + 16)
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_HUSH_PARSER
 
 /*
  * Size of malloc() pool
@@ -249,11 +219,6 @@
 #define CONFIG_SYS_SPL_MALLOC_START    0x20080000
 #define CONFIG_SYS_SPL_MALLOC_SIZE     0x80000
 
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_GPIO_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
-
 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SYS_MONITOR_LEN         (512 << 10)
 
@@ -262,20 +227,12 @@
 #define CONFIG_SYS_MCKR                        0x1301
 #define CONFIG_SYS_MCKR_CSS            0x1302
 
-#define ATMEL_BASE_MPDDRC              ATMEL_BASE_DDRSDRC
-
 #ifdef CONFIG_SYS_USE_MMC
 #define CONFIG_SPL_LDSCRIPT            arch/arm/mach-at91/arm926ejs/u-boot-spl.lds
-#define CONFIG_SPL_MMC_SUPPORT
-#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS     0x400
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME                "u-boot.img"
-#define CONFIG_SPL_FAT_SUPPORT
-#define CONFIG_SPL_LIBDISK_SUPPORT
 
 #elif CONFIG_SYS_USE_NANDFLASH
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SYS_NAND_U_BOOT_OFFS    0x40000
@@ -288,8 +245,6 @@
 #define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER
 
 #elif CONFIG_SYS_USE_SPIFLASH
-#define CONFIG_SPL_SPI_SUPPORT
-#define CONFIG_SPL_SPI_FLASH_SUPPORT
 #define CONFIG_SPL_SPI_LOAD
 #define CONFIG_SYS_SPI_U_BOOT_OFFS     0x8400