Convert CONFIG_SPL_BSS_MAX_SIZE et al to Kconfig

[platform/kernel/u-boot.git] / include / configs / at91sam9x5ek.h

diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h
index a30e345..2eb7787 100644 (file)
--- a/include/configs/at91sam9x5ek.h
+++ b/include/configs/at91sam9x5ek.h
@@ -12,18 +12,7 @@
 #define CONFIG_SYS_AT91_SLOW_CLOCK     32768
 #define CONFIG_SYS_AT91_MAIN_CLOCK     12000000        /* 12 MHz crystal */
 
-#define CONFIG_CMDLINE_TAG             /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
 /* general purpose I/O */
-#define CONFIG_ATMEL_LEGACY            /* required until (g)pio is fixed */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
 
 /*
  * define CONFIG_USB_EHCI_HCD to enable USB Hi-Speed (aka 2.0)
@@ -31,7 +20,6 @@
  */
 
 /* SDRAM */
-#define CONFIG_NR_DRAM_BANKS           1
 #define CONFIG_SYS_SDRAM_BASE          0x20000000
 #define CONFIG_SYS_SDRAM_SIZE          0x08000000      /* 128 megs */
 
@@ -39,9 +27,6 @@
        (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
 
 /* DataFlash */
-#ifdef CONFIG_CMD_SF
-#define CONFIG_SF_DEFAULT_SPEED                30000000
-#endif
 
 /* NAND flash */
 #ifdef CONFIG_CMD_NAND
@@ -56,12 +41,6 @@
 #define CONFIG_SYS_NAND_READY_PIN      AT91_PIN_PD5
 #endif
 
-/* PMECC & PMERRLOC */
-#define CONFIG_ATMEL_NAND_HWECC                1
-#define CONFIG_ATMEL_NAND_HW_PMECC     1
-#define CONFIG_PMECC_CAP               2
-#define CONFIG_PMECC_SECTOR_SIZE       512
-
 /* USB */
 #ifdef CONFIG_CMD_USB
 #ifndef CONFIG_USB_EHCI_HCD
@@ -75,54 +54,10 @@
 #endif
 #endif
 
-#define CONFIG_SYS_LOAD_ADDR           0x22000000      /* load address */
-
-#define CONFIG_SYS_MEMTEST_START       CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END         0x26e00000
-
-#ifdef CONFIG_NAND_BOOT
-/* bootstrap + u-boot + env + linux in nandflash */
-#define CONFIG_ENV_OFFSET              0x140000
-#define CONFIG_ENV_OFFSET_REDUND       0x100000
-#define CONFIG_ENV_SIZE                0x20000         /* 1 sector = 128 kB */
-#define CONFIG_BOOTCOMMAND     "nand read " \
-                               "0x22000000 0x200000 0x300000; " \
-                               "bootm 0x22000000"
-#elif defined(CONFIG_SPI_BOOT)
-/* bootstrap + u-boot + env + linux in spi flash */
-#define CONFIG_ENV_OFFSET      0x5000
-#define CONFIG_ENV_SIZE                0x3000
-#define CONFIG_ENV_SECT_SIZE   0x1000
-#define CONFIG_ENV_SPI_MAX_HZ  30000000
-#define CONFIG_BOOTCOMMAND     "sf probe 0; " \
-                               "sf read 0x22000000 0x100000 0x300000; " \
-                               "bootm 0x22000000"
-#elif defined(CONFIG_SYS_USE_DATAFLASH)
-/* bootstrap + u-boot + env + linux in data flash */
-#define CONFIG_ENV_OFFSET      0x4200
-#define CONFIG_ENV_SIZE                0x4200
-#define CONFIG_ENV_SECT_SIZE   0x210
-#define CONFIG_ENV_SPI_MAX_HZ  30000000
-#define CONFIG_BOOTCOMMAND     "sf probe 0; " \
-                               "sf read 0x22000000 0x84000 0x294000; " \
-                               "bootm 0x22000000"
-#else /* CONFIG_SD_BOOT */
-/* bootstrap + u-boot + env + linux in mmc */
-#define CONFIG_ENV_SIZE                0x4000
-#endif
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN          (512 * 1024 + 0x1000)
-
 /* SPL */
-#define CONFIG_SPL_TEXT_BASE           0x300000
-#define CONFIG_SPL_MAX_SIZE            0x6000
 #define CONFIG_SPL_STACK               0x308000
 
 #define CONFIG_SPL_BSS_START_ADDR      0x20000000
-#define CONFIG_SPL_BSS_MAX_SIZE                0x80000
 #define CONFIG_SYS_SPL_MALLOC_START    0x20080000
 #define CONFIG_SYS_SPL_MALLOC_SIZE     0x80000
 
@@ -133,24 +68,4 @@
 #define CONFIG_SYS_MCKR                        0x1301
 #define CONFIG_SYS_MCKR_CSS            0x1302
 
-#ifdef CONFIG_SD_BOOT
-#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME                "u-boot.img"
-
-#elif CONFIG_SPI_BOOT
-#define CONFIG_SYS_SPI_U_BOOT_OFFS     0x8400
-
-#elif CONFIG_NAND_BOOT
-#define CONFIG_SPL_NAND_DRIVERS
-#define CONFIG_SPL_NAND_BASE
-#endif
-#define CONFIG_SYS_NAND_U_BOOT_OFFS    0x40000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_PAGE_SIZE      0x800
-#define CONFIG_SYS_NAND_PAGE_COUNT     64
-#define CONFIG_SYS_NAND_OOBSIZE                64
-#define CONFIG_SYS_NAND_BLOCK_SIZE     0x20000
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS  0x0
-#define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER
-
 #endif