Merge branch '2022-07-07-Kconfig-migrations-dead-code-removal' into next

[platform/kernel/u-boot.git] / include / configs / at91sam9x5ek.h

diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h
index 08ce67a..0e76658 100644 (file)
--- a/include/configs/at91sam9x5ek.h
+++ b/include/configs/at91sam9x5ek.h
@@ -13,12 +13,6 @@
 #define CONFIG_SYS_AT91_MAIN_CLOCK     12000000        /* 12 MHz crystal */
 
 /* general purpose I/O */
-#define CONFIG_ATMEL_LEGACY            /* required until (g)pio is fixed */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
 
 /*
  * define CONFIG_USB_EHCI_HCD to enable USB Hi-Speed (aka 2.0)
@@ -29,9 +23,6 @@
 #define CONFIG_SYS_SDRAM_BASE          0x20000000
 #define CONFIG_SYS_SDRAM_SIZE          0x08000000      /* 128 megs */
 
-#define CONFIG_SYS_INIT_SP_ADDR \
-       (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
-
 /* DataFlash */
 
 /* NAND flash */
@@ -47,45 +38,7 @@
 #define CONFIG_SYS_NAND_READY_PIN      AT91_PIN_PD5
 #endif
 
-/* USB */
-#ifdef CONFIG_CMD_USB
-#ifndef CONFIG_USB_EHCI_HCD
-#define CONFIG_USB_ATMEL
-#define CONFIG_USB_ATMEL_CLK_SEL_UPLL
-#define CONFIG_USB_OHCI_NEW
-#define CONFIG_SYS_USB_OHCI_CPU_INIT
-#define CONFIG_SYS_USB_OHCI_REGS_BASE          ATMEL_BASE_OHCI
-#define CONFIG_SYS_USB_OHCI_SLOT_NAME          "at91sam9x5"
-#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS     3
-#endif
-#endif
-
-#ifdef CONFIG_NAND_BOOT
-/* bootstrap + u-boot + env + linux in nandflash */
-#define CONFIG_BOOTCOMMAND     "nand read " \
-                               "0x22000000 0x200000 0x600000; " \
-                               "nand read 0x21000000 0x180000 0x20000; " \
-                               "bootz 0x22000000 - 0x21000000"
-#elif defined(CONFIG_SPI_BOOT)
-/* bootstrap + u-boot + env + linux in spi flash */
-#define CONFIG_BOOTCOMMAND     "sf probe 0; " \
-                               "sf read 0x22000000 0x100000 0x300000; " \
-                               "bootm 0x22000000"
-#elif defined(CONFIG_SYS_USE_DATAFLASH)
-/* bootstrap + u-boot + env + linux in data flash */
-#define CONFIG_BOOTCOMMAND     "sf probe 0; " \
-                               "sf read 0x22000000 0x84000 0x294000; " \
-                               "bootm 0x22000000"
-#endif
-
 /* SPL */
-#define CONFIG_SPL_MAX_SIZE            0x6000
-#define CONFIG_SPL_STACK               0x308000
-
-#define CONFIG_SPL_BSS_START_ADDR      0x20000000
-#define CONFIG_SPL_BSS_MAX_SIZE                0x80000
-#define CONFIG_SYS_SPL_MALLOC_START    0x20080000
-#define CONFIG_SYS_SPL_MALLOC_SIZE     0x80000
 
 #define CONFIG_SYS_MONITOR_LEN         (512 << 10)
 
@@ -94,10 +47,4 @@
 #define CONFIG_SYS_MCKR                        0x1301
 #define CONFIG_SYS_MCKR_CSS            0x1302
 
-#ifdef CONFIG_SD_BOOT
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME                "u-boot.img"
-#endif
-#define CONFIG_SYS_NAND_U_BOOT_OFFS    0x40000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-
 #endif