#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */
-#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
/* general purpose I/O */
-#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
/*
* define CONFIG_USB_EHCI_HCD to enable USB Hi-Speed (aka 2.0)
#define CONFIG_SYS_SDRAM_BASE 0x20000000
#define CONFIG_SYS_SDRAM_SIZE 0x08000000 /* 128 megs */
-#define CONFIG_SYS_INIT_SP_ADDR \
- (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
-
/* DataFlash */
/* NAND flash */
#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PD5
#endif
-/* USB */
-#ifdef CONFIG_CMD_USB
-#ifndef CONFIG_USB_EHCI_HCD
-#define CONFIG_USB_ATMEL
-#define CONFIG_USB_ATMEL_CLK_SEL_UPLL
-#define CONFIG_USB_OHCI_NEW
-#define CONFIG_SYS_USB_OHCI_CPU_INIT
-#define CONFIG_SYS_USB_OHCI_REGS_BASE ATMEL_BASE_OHCI
-#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9x5"
-#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 3
-#endif
-#endif
-
-#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
-
-#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END 0x26e00000
-
-#ifdef CONFIG_NAND_BOOT
-/* bootstrap + u-boot + env + linux in nandflash */
-#define CONFIG_BOOTCOMMAND "nand read " \
- "0x22000000 0x200000 0x600000; " \
- "nand read 0x21000000 0x180000 0x20000; " \
- "bootz 0x22000000 - 0x21000000"
-#elif defined(CONFIG_SPI_BOOT)
-/* bootstrap + u-boot + env + linux in spi flash */
-#define CONFIG_BOOTCOMMAND "sf probe 0; " \
- "sf read 0x22000000 0x100000 0x300000; " \
- "bootm 0x22000000"
-#elif defined(CONFIG_SYS_USE_DATAFLASH)
-/* bootstrap + u-boot + env + linux in data flash */
-#define CONFIG_BOOTCOMMAND "sf probe 0; " \
- "sf read 0x22000000 0x84000 0x294000; " \
- "bootm 0x22000000"
-#endif
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (512 * 1024 + 0x1000)
-
/* SPL */
-#define CONFIG_SPL_MAX_SIZE 0x6000
-#define CONFIG_SPL_STACK 0x308000
-
-#define CONFIG_SPL_BSS_START_ADDR 0x20000000
-#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
-#define CONFIG_SYS_SPL_MALLOC_START 0x20080000
-#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000
#define CONFIG_SYS_MONITOR_LEN (512 << 10)
#define CONFIG_SYS_MCKR 0x1301
#define CONFIG_SYS_MCKR_CSS 0x1302
-#ifdef CONFIG_SD_BOOT
-#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
-#elif CONFIG_NAND_BOOT
-#define CONFIG_SPL_NAND_DRIVERS
-#define CONFIG_SPL_NAND_BASE
-#endif
-#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_PAGE_SIZE 0x800
-#define CONFIG_SYS_NAND_PAGE_COUNT 64
-#define CONFIG_SYS_NAND_OOBSIZE 64
-#define CONFIG_SYS_NAND_BLOCK_SIZE 0x20000
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0x0
-
#endif