/* ARM asynchronous clock */
#define AT91_CPU_NAME "AT91SAM9RL"
-#define AT91_MAIN_CLOCK 200000000 /* from 12.000 MHz crystal */
-#define AT91_MASTER_CLOCK 100000000 /* peripheral = main / 2 */
-#define CONFIG_SYS_HZ 1000000 /* 1us resolution */
+#define AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */
+#define AT91_MASTER_CLOCK 100000000 /* peripheral */
+#define AT91_CPU_CLOCK 200000000 /* cpu */
+#define CONFIG_SYS_HZ 1000000 /* 1us resolution */
#define AT91_SLOW_CLOCK 32768 /* slow clock */
#define CONFIG_ATMEL_LCD_RGB565 1
#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
+/* LED */
+#define CONFIG_AT91_LED
+#define CONFIG_RED_LED AT91_PIN_PD14 /* this is the power led */
+#define CONFIG_GREEN_LED AT91_PIN_PD15 /* this is the user1 led */
+#define CONFIG_YELLOW_LED AT91_PIN_PD16 /* this is the user2 led */
+
#define CONFIG_BOOTDELAY 3
/*
*/
#include <config_cmd_default.h>
#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_AUTOSCRIPT
#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_IMI
#undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_LOADS
#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_SOURCE
#undef CONFIG_CMD_USB
#define CONFIG_CMD_NAND 1
#define CONFIG_SYS_NO_FLASH 1
/* NAND flash */
-#define NAND_MAX_CHIPS 1
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_NAND_ATMEL
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE 0x40000000
#define CONFIG_SYS_NAND_DBW_8 1
+/* our ALE is AD21 */
+#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
+/* our CLE is AD22 */
+#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
+#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PB6
+#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PD17
+#endif
/* Ethernet - not present */
#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
#define CONFIG_SYS_MEMTEST_END 0x23e00000
-#define CONFIG_SYS_USE_DATAFLASH 1
-#undef CONFIG_SYS_USE_NANDFLASH
-
#ifdef CONFIG_SYS_USE_DATAFLASH
/* bootstrap + u-boot + env + linux in dataflash on CS0 */