configs: Migrate CMD_NAND*

[platform/kernel/u-boot.git] / include / configs / at91sam9rlek.h

diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h
index 31a7cb1..683322a 100644 (file)
--- a/include/configs/at91sam9rlek.h
+++ b/include/configs/at91sam9rlek.h
@@ -29,18 +29,11 @@
 #define CONFIG_INITRD_TAG              1
 
 #define CONFIG_ATMEL_LEGACY
-#define CONFIG_AT91_GPIO               1
-#define CONFIG_AT91_GPIO_PULLUP                1
 
 /*
  * Hardware drivers
  */
 
-/* serial console */
-#define CONFIG_ATMEL_USART
-#define CONFIG_USART_BASE              ATMEL_BASE_DBGU
-#define CONFIG_USART_ID                        ATMEL_ID_SYS
-
 /* LCD */
 #define LCD_BPP                                LCD_COLOR8
 #define CONFIG_LCD_LOGO                        1
@@ -52,26 +45,13 @@
 /* Let board_init_f handle the framebuffer allocation */
 #undef CONFIG_FB_ADDR
 
-/* LED */
-#define CONFIG_AT91_LED
-#define        CONFIG_RED_LED          AT91_PIN_PD14   /* this is the power led */
-#define        CONFIG_GREEN_LED        AT91_PIN_PD15   /* this is the user1 led */
-#define        CONFIG_YELLOW_LED       AT91_PIN_PD16   /* this is the user2 led */
-
-
-/*
- * Command line configuration.
- */
-
-#define CONFIG_CMD_NAND                        1
-
 /* SDRAM */
 #define CONFIG_NR_DRAM_BANKS           1
 #define CONFIG_SYS_SDRAM_BASE          ATMEL_BASE_CS1
 #define CONFIG_SYS_SDRAM_SIZE          0x04000000
 
 #define CONFIG_SYS_INIT_SP_ADDR \
-       (ATMEL_BASE_SRAM + 0x1000 - GENERATED_GBL_DATA_SIZE)
+       (ATMEL_BASE_SRAM + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
 
 /* DataFlash */
 #define CONFIG_ATMEL_DATAFLASH_SPI
@@ -97,12 +77,6 @@
 
 #endif
 
-/* MMC */
-
-#ifdef CONFIG_CMD_MMC
-#define CONFIG_GENERIC_ATMEL_MCI
-#endif
-
 /* Ethernet - not present */
 
 /* USB - not supported */
@@ -115,7 +89,6 @@
 #ifdef CONFIG_SYS_USE_DATAFLASH
 
 /* bootstrap + u-boot + env + linux in dataflash on CS0 */
-#define CONFIG_ENV_IS_IN_DATAFLASH     1
 #define CONFIG_SYS_MONITOR_BASE        (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
 #define CONFIG_ENV_OFFSET              0x4200
 #define CONFIG_ENV_ADDR                (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
@@ -129,8 +102,7 @@
 #elif CONFIG_SYS_USE_NANDFLASH
 
 /* bootstrap + u-boot + env + linux in nandflash */
-#define CONFIG_ENV_IS_IN_NAND          1
-#define CONFIG_ENV_OFFSET              0xc0000
+#define CONFIG_ENV_OFFSET              0x120000
 #define CONFIG_ENV_OFFSET_REDUND       0x100000
 #define CONFIG_ENV_SIZE                0x20000         /* 1 sector = 128 kB */
 #define CONFIG_BOOTCOMMAND     "nand read 0x22000000 0x200000 0x600000; "      \
@@ -146,11 +118,6 @@
 #else /* CONFIG_SYS_USE_MMC */
 
 /* bootstrap + u-boot + env + linux in mmc */
-#define CONFIG_ENV_IS_IN_FAT
-#define CONFIG_FAT_WRITE
-#define FAT_ENV_INTERFACE      "mmc"
-#define FAT_ENV_FILE           "uboot.env"
-#define FAT_ENV_DEVICE_AND_PART        "0"
 #define CONFIG_ENV_SIZE                0x4000
 #define CONFIG_BOOTCOMMAND     "fatload mmc 0:1 0x21000000 at91sam9rlek.dtb; " \
                                "fatload mmc 0:1 0x22000000 zImage; " \