Remove unused symbols CONFIG_SYS_JFFS2_FIRST_BANK et al

[platform/kernel/u-boot.git] / include / configs / at91sam9263ek.h

diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h
index 3e7adf6..fb65880 100644 (file)
--- a/include/configs/at91sam9263ek.h
+++ b/include/configs/at91sam9263ek.h
@@ -10,6 +10,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <linux/stringify.h>
+
 /*
  * SoC must be defined first, before hardware.h is included.
  * In this case SoC is defined in boards.cfg.
@@ -20,57 +22,21 @@
 #define CONFIG_SYS_AT91_MAIN_CLOCK     16367660 /* 16.367 MHz crystal */
 #define CONFIG_SYS_AT91_SLOW_CLOCK     32768
 
-#define CONFIG_CMDLINE_TAG     1       /* enable passing of ATAGs      */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG      1
-
-#ifndef CONFIG_SYS_USE_BOOT_NORFLASH
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#else
-#define CONFIG_SYS_USE_NORFLASH
-#endif
-
-/*
- * Hardware drivers
- */
-#define CONFIG_ATMEL_LEGACY
-
-/* LCD */
-#define LCD_BPP                                LCD_COLOR8
-#define CONFIG_LCD_LOGO                        1
-#undef LCD_TEST_PATTERN
-#define CONFIG_LCD_INFO                        1
-#define CONFIG_LCD_INFO_BELOW_LOGO     1
-#define CONFIG_ATMEL_LCD               1
-#define CONFIG_ATMEL_LCD_BGR555                1
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE      1
-
 /* SDRAM */
 #define CONFIG_SYS_SDRAM_BASE          ATMEL_BASE_CS1
 #define CONFIG_SYS_SDRAM_SIZE          0x04000000
 
-#define CONFIG_SYS_INIT_SP_ADDR \
-       (ATMEL_BASE_SRAM1 + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE       (16 * 1024)
+#define CONFIG_SYS_INIT_RAM_ADDR       ATMEL_BASE_SRAM1
 
 /* NOR flash, if populated */
 #ifdef CONFIG_SYS_USE_NORFLASH
 #define PHYS_FLASH_1                           0x10000000
 #define CONFIG_SYS_FLASH_BASE                  PHYS_FLASH_1
-#define CONFIG_SYS_MAX_FLASH_SECT              256
-#define CONFIG_SYS_MAX_FLASH_BANKS             1
 
-#define CONFIG_SYS_MONITOR_SEC 1:0-3
-#define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_MONITOR_LEN (256 << 10)
-#define CONFIG_ENV_ADDR                (CONFIG_SYS_FLASH_BASE + 0x007E0000)
-#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR - CONFIG_ENV_SIZE)
 
 /* Address and size of Primary Environment Sector */
-#define CONFIG_ENV_SIZE                0x10000
 
 #define CONFIG_EXTRA_ENV_SETTINGS      \
        "monitor_base=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0" \
@@ -92,7 +58,7 @@
        (AT91_PMC_PLLAR_29 |                                    \
        AT91_PMC_PLLXR_OUT(MASTER_PLL_OUT) |                    \
        AT91_PMC_PLLXR_PLLCOUNT(63) |                           \
-       AT91_PMC_PLLXR_MUL(MASTER_PLL_MUL - 1) |                \
+       AT91_PMC_PLLXR_MUL(MASTER_PLL_MUL - 1) |                \
        AT91_PMC_PLLXR_DIV(MASTER_PLL_DIV))
 
 /* PCK/2 = MCK Master Clock from PLLA */
@@ -102,7 +68,7 @@
 
 /* PCK/2 = MCK Master Clock from PLLA */
 #define        CONFIG_SYS_MCKR2_VAL            \
-       (AT91_PMC_MCKR_CSS_PLLA | AT91_PMC_MCKR_PRES_1 |        \
+       (AT91_PMC_MCKR_CSS_PLLA | AT91_PMC_MCKR_PRES_1 |        \
        AT91_PMC_MCKR_MDIV_2)
 
 /* define PDC[31:16] as DATA[31:16] */
@@ -181,6 +147,7 @@
                 AT91_WDT_MR_WDD(0xfff))
 
 #endif
+#include <linux/stringify.h>
 #endif
 
 /* NAND flash */
@@ -196,46 +163,7 @@
 #define CONFIG_SYS_NAND_READY_PIN              AT91_PIN_PA22
 #endif
 
-/* Ethernet */
-#define CONFIG_RESET_PHY_R             1
-#define CONFIG_AT91_WANTS_COMMON_PHY
-
 /* USB */
-#define CONFIG_USB_ATMEL
-#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
-#define CONFIG_USB_OHCI_NEW            1
-#define CONFIG_SYS_USB_OHCI_CPU_INIT           1
 #define CONFIG_SYS_USB_OHCI_REGS_BASE          0x00a00000      /* AT91SAM9263_UHP_BASE */
-#define CONFIG_SYS_USB_OHCI_SLOT_NAME          "at91sam9263"
-#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS     2
-
-#define CONFIG_SYS_LOAD_ADDR                   0x22000000      /* load address */
-
-#define CONFIG_SYS_MEMTEST_START               CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END                 0x23e00000
-
-#ifdef CONFIG_SYS_USE_DATAFLASH
-
-/* bootstrap + u-boot + env + linux in dataflash on CS0 */
-#define CONFIG_ENV_OFFSET      0x4200
-#define CONFIG_ENV_SIZE                0x4200
-#define CONFIG_ENV_SECT_SIZE   0x210
-#define CONFIG_BOOTCOMMAND     "sf probe 0; " \
-                               "sf read 0x22000000 0x84000 0x294000; " \
-                               "bootm 0x22000000"
-
-#elif CONFIG_SYS_USE_NANDFLASH
-
-/* bootstrap + u-boot + env + linux in nandflash */
-#define CONFIG_ENV_OFFSET              0x140000
-#define CONFIG_ENV_OFFSET_REDUND       0x100000
-#define CONFIG_ENV_SIZE                0x20000         /* 1 sector = 128 kB */
-#define CONFIG_BOOTCOMMAND     "nand read 0x22000000 0x200000 0x300000; bootm"
-#endif
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN  ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
 
 #endif