Merge tag 'v2021.10-rc5' into next

[platform/kernel/u-boot.git] / include / configs / at91sam9263ek.h

diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h
index a8337cd..f8df5b0 100644 (file)
--- a/include/configs/at91sam9263ek.h
+++ b/include/configs/at91sam9263ek.h
@@ -1,42 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2007-2008
  * Stelian Pop <stelian@popies.net>
  * Lead Tech Design <www.leadtechdesign.com>
  *
  * Configuation settings for the AT91SAM9263EK board.
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <linux/stringify.h>
+
 /*
  * SoC must be defined first, before hardware.h is included.
  * In this case SoC is defined in boards.cfg.
  */
 #include <asm/hardware.h>
 
-#ifndef CONFIG_SYS_USE_BOOT_NORFLASH
-#define CONFIG_SYS_TEXT_BASE           0x21F00000
-#else
-#define CONFIG_SYS_TEXT_BASE           0x0000000
-#endif
-
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_MAIN_CLOCK     16367660 /* 16.367 MHz crystal */
 #define CONFIG_SYS_AT91_SLOW_CLOCK     32768
 
-#define CONFIG_AT91SAM9263EK   1       /* It's an AT91SAM9263EK Board */
-
-#define CONFIG_ARCH_CPU_INIT
-
-#define CONFIG_CMDLINE_TAG     1       /* enable passing of ATAGs      */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG      1
-
 #ifndef CONFIG_SYS_USE_BOOT_NORFLASH
-#define CONFIG_SKIP_LOWLEVEL_INIT
 #else
 #define CONFIG_SYS_USE_NORFLASH
 #endif
@@ -59,36 +45,16 @@
  * BOOTP options
  */
 #define CONFIG_BOOTP_BOOTFILESIZE      1
-#define CONFIG_BOOTP_BOOTPATH          1
-#define CONFIG_BOOTP_GATEWAY           1
-#define CONFIG_BOOTP_HOSTNAME          1
-
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_NAND                1
 
 /* SDRAM */
-#define CONFIG_NR_DRAM_BANKS           1
 #define CONFIG_SYS_SDRAM_BASE          ATMEL_BASE_CS1
 #define CONFIG_SYS_SDRAM_SIZE          0x04000000
 
 #define CONFIG_SYS_INIT_SP_ADDR \
        (ATMEL_BASE_SRAM1 + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
 
-/* DataFlash */
-#define CONFIG_ATMEL_DATAFLASH_SPI
-#define CONFIG_HAS_DATAFLASH           1
-#define CONFIG_SYS_MAX_DATAFLASH_BANKS         1
-#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0    0xC0000000      /* CS0 */
-#define AT91_SPI_CLK                   15000000
-#define DATAFLASH_TCSS                 (0x1a << 16)
-#define DATAFLASH_TCHS                 (0x1 << 24)
-
 /* NOR flash, if populated */
 #ifdef CONFIG_SYS_USE_NORFLASH
-#define CONFIG_SYS_FLASH_CFI                   1
-#define CONFIG_FLASH_CFI_DRIVER                        1
 #define PHYS_FLASH_1                           0x10000000
 #define CONFIG_SYS_FLASH_BASE                  PHYS_FLASH_1
 #define CONFIG_SYS_MAX_FLASH_SECT              256
@@ -97,12 +63,8 @@
 #define CONFIG_SYS_MONITOR_SEC 1:0-3
 #define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_MONITOR_LEN (256 << 10)
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_ADDR                (CONFIG_SYS_FLASH_BASE + 0x007E0000)
-#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR - CONFIG_ENV_SIZE)
 
 /* Address and size of Primary Environment Sector */
-#define CONFIG_ENV_SIZE                0x10000
 
 #define CONFIG_EXTRA_ENV_SETTINGS      \
        "monitor_base=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0" \
@@ -213,11 +175,11 @@
                 AT91_WDT_MR_WDD(0xfff))
 
 #endif
+#include <linux/stringify.h>
 #endif
 
 /* NAND flash */
 #ifdef CONFIG_CMD_NAND
-#define CONFIG_NAND_ATMEL
 #define CONFIG_SYS_MAX_NAND_DEVICE             1
 #define CONFIG_SYS_NAND_BASE                   ATMEL_BASE_CS3
 #define CONFIG_SYS_NAND_DBW_8                  1
@@ -242,49 +204,17 @@
 #define CONFIG_SYS_USB_OHCI_SLOT_NAME          "at91sam9263"
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS     2
 
-#define CONFIG_SYS_LOAD_ADDR                   0x22000000      /* load address */
-
-#define CONFIG_SYS_MEMTEST_START               CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END                 0x23e00000
-
 #ifdef CONFIG_SYS_USE_DATAFLASH
 
 /* bootstrap + u-boot + env + linux in dataflash on CS0 */
-#define CONFIG_ENV_IS_IN_DATAFLASH     1
-#define CONFIG_SYS_MONITOR_BASE        (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
-#define CONFIG_ENV_OFFSET              0x4200
-#define CONFIG_ENV_ADDR                (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
-#define CONFIG_ENV_SIZE                0x4200
-#define CONFIG_BOOTCOMMAND     "cp.b 0xC0084000 0x22000000 0x210000; bootm"
-#define CONFIG_BOOTARGS                "console=ttyS0,115200 " \
-                               "root=/dev/mtdblock0 " \
-                               "mtdparts=atmel_nand:-(root) "\
-                               "rw rootfstype=jffs2"
+#define CONFIG_BOOTCOMMAND     "sf probe 0; " \
+                               "sf read 0x22000000 0x84000 0x294000; " \
+                               "bootm 0x22000000"
 
 #elif CONFIG_SYS_USE_NANDFLASH
 
 /* bootstrap + u-boot + env + linux in nandflash */
-#define CONFIG_ENV_OFFSET              0x120000
-#define CONFIG_ENV_OFFSET_REDUND       0x100000
-#define CONFIG_ENV_SIZE                0x20000         /* 1 sector = 128 kB */
 #define CONFIG_BOOTCOMMAND     "nand read 0x22000000 0x200000 0x300000; bootm"
-#define CONFIG_BOOTARGS                                                        \
-       "console=ttyS0,115200 earlyprintk "                             \
-       "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,"          \
-       "256k(env),256k(env_redundant),256k(spare),"                    \
-       "512k(dtb),6M(kernel)ro,-(rootfs) "                             \
-       "root=/dev/mtdblock7 rw rootfstype=jffs2"
 #endif
 
-#define CONFIG_SYS_CBSIZE              256
-#define CONFIG_SYS_MAXARGS             16
-#define CONFIG_SYS_LONGHELP            1
-#define CONFIG_CMDLINE_EDITING         1
-#define CONFIG_AUTO_COMPLETE
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN  ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
-
 #endif