Merge tag 'xilinx-for-v2022.04-rc1' of https://source.denx.de/u-boot/custodians/u...

[platform/kernel/u-boot.git] / include / configs / at91sam9263ek.h

diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h
index 7fe51c2..5aa9fee 100644 (file)
--- a/include/configs/at91sam9263ek.h
+++ b/include/configs/at91sam9263ek.h
@@ -1,16 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2007-2008
  * Stelian Pop <stelian@popies.net>
  * Lead Tech Design <www.leadtechdesign.com>
  *
  * Configuation settings for the AT91SAM9263EK board.
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <linux/stringify.h>
+
 /*
  * SoC must be defined first, before hardware.h is included.
  * In this case SoC is defined in boards.cfg.
@@ -21,14 +22,7 @@
 #define CONFIG_SYS_AT91_MAIN_CLOCK     16367660 /* 16.367 MHz crystal */
 #define CONFIG_SYS_AT91_SLOW_CLOCK     32768
 
-#define CONFIG_ARCH_CPU_INIT
-
-#define CONFIG_CMDLINE_TAG     1       /* enable passing of ATAGs      */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG      1
-
 #ifndef CONFIG_SYS_USE_BOOT_NORFLASH
-#define CONFIG_SKIP_LOWLEVEL_INIT
 #else
 #define CONFIG_SYS_USE_NORFLASH
 #endif
@@ -53,7 +47,6 @@
 #define CONFIG_BOOTP_BOOTFILESIZE      1
 
 /* SDRAM */
-#define CONFIG_NR_DRAM_BANKS           1
 #define CONFIG_SYS_SDRAM_BASE          ATMEL_BASE_CS1
 #define CONFIG_SYS_SDRAM_SIZE          0x04000000
 
@@ -62,8 +55,6 @@
 
 /* NOR flash, if populated */
 #ifdef CONFIG_SYS_USE_NORFLASH
-#define CONFIG_SYS_FLASH_CFI                   1
-#define CONFIG_FLASH_CFI_DRIVER                        1
 #define PHYS_FLASH_1                           0x10000000
 #define CONFIG_SYS_FLASH_BASE                  PHYS_FLASH_1
 #define CONFIG_SYS_MAX_FLASH_SECT              256
@@ -72,11 +63,8 @@
 #define CONFIG_SYS_MONITOR_SEC 1:0-3
 #define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_MONITOR_LEN (256 << 10)
-#define CONFIG_ENV_ADDR                (CONFIG_SYS_FLASH_BASE + 0x007E0000)
-#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR - CONFIG_ENV_SIZE)
 
 /* Address and size of Primary Environment Sector */
-#define CONFIG_ENV_SIZE                0x10000
 
 #define CONFIG_EXTRA_ENV_SETTINGS      \
        "monitor_base=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0" \
@@ -98,7 +86,7 @@
        (AT91_PMC_PLLAR_29 |                                    \
        AT91_PMC_PLLXR_OUT(MASTER_PLL_OUT) |                    \
        AT91_PMC_PLLXR_PLLCOUNT(63) |                           \
-       AT91_PMC_PLLXR_MUL(MASTER_PLL_MUL - 1) |                \
+       AT91_PMC_PLLXR_MUL(MASTER_PLL_MUL - 1) |                \
        AT91_PMC_PLLXR_DIV(MASTER_PLL_DIV))
 
 /* PCK/2 = MCK Master Clock from PLLA */
@@ -108,7 +96,7 @@
 
 /* PCK/2 = MCK Master Clock from PLLA */
 #define        CONFIG_SYS_MCKR2_VAL            \
-       (AT91_PMC_MCKR_CSS_PLLA | AT91_PMC_MCKR_PRES_1 |        \
+       (AT91_PMC_MCKR_CSS_PLLA | AT91_PMC_MCKR_PRES_1 |        \
        AT91_PMC_MCKR_MDIV_2)
 
 /* define PDC[31:16] as DATA[31:16] */
@@ -187,11 +175,11 @@
                 AT91_WDT_MR_WDD(0xfff))
 
 #endif
+#include <linux/stringify.h>
 #endif
 
 /* NAND flash */
 #ifdef CONFIG_CMD_NAND
-#define CONFIG_NAND_ATMEL
 #define CONFIG_SYS_MAX_NAND_DEVICE             1
 #define CONFIG_SYS_NAND_BASE                   ATMEL_BASE_CS3
 #define CONFIG_SYS_NAND_DBW_8                  1
@@ -216,34 +204,13 @@
 #define CONFIG_SYS_USB_OHCI_SLOT_NAME          "at91sam9263"
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS     2
 
-#define CONFIG_SYS_LOAD_ADDR                   0x22000000      /* load address */
-
-#define CONFIG_SYS_MEMTEST_START               CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END                 0x23e00000
-
 #ifdef CONFIG_SYS_USE_DATAFLASH
 
 /* bootstrap + u-boot + env + linux in dataflash on CS0 */
-#define CONFIG_ENV_OFFSET      0x4200
-#define CONFIG_ENV_SIZE                0x4200
-#define CONFIG_ENV_SECT_SIZE   0x210
-#define CONFIG_ENV_SPI_MAX_HZ  15000000
-#define CONFIG_BOOTCOMMAND     "sf probe 0; " \
-                               "sf read 0x22000000 0x84000 0x294000; " \
-                               "bootm 0x22000000"
 
 #elif CONFIG_SYS_USE_NANDFLASH
 
 /* bootstrap + u-boot + env + linux in nandflash */
-#define CONFIG_ENV_OFFSET              0x120000
-#define CONFIG_ENV_OFFSET_REDUND       0x100000
-#define CONFIG_ENV_SIZE                0x20000         /* 1 sector = 128 kB */
-#define CONFIG_BOOTCOMMAND     "nand read 0x22000000 0x200000 0x300000; bootm"
 #endif
 
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN  ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
-
 #endif