powerpc/p4080ds: Move ICS refclk define into P4080DS.h

[platform/kernel/u-boot.git] / include / configs / at91sam9261ek.h

diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h
index fdaa71c..401478b 100644 (file)
--- a/include/configs/at91sam9261ek.h
+++ b/include/configs/at91sam9261ek.h
@@ -27,14 +27,18 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_AT91_LEGACY
+
 /* ARM asynchronous clock */
-#define AT91_CPU_NAME          "AT91SAM9261"
-#define AT91_MAIN_CLOCK                18432000        /* 18.432 MHz crystal */
+#define CONFIG_SYS_AT91_MAIN_CLOCK     18432000        /* 18.432 MHz crystal */
 #define CONFIG_SYS_HZ          1000
 
 #define CONFIG_ARM926EJS       1       /* This is an ARM926EJS Core    */
+#ifdef CONFIG_AT91SAM9G10EK
+#define CONFIG_AT91SAM9G10     1       /* It's an Atmel AT91SAM9G10 SoC*/
+#else
 #define CONFIG_AT91SAM9261     1       /* It's an Atmel AT91SAM9261 SoC*/
-#define CONFIG_AT91SAM9261EK   1       /* on an AT91SAM9261EK Board    */
+#endif
 #define CONFIG_ARCH_CPU_INIT
 #undef CONFIG_USE_IRQ                  /* we don't need IRQ/FIQ stuff  */
 
@@ -43,11 +47,11 @@
 #define CONFIG_INITRD_TAG      1
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SKIP_RELOCATE_UBOOT
 
 /*
  * Hardware drivers
  */
+#define CONFIG_AT91_GPIO       1
 #define CONFIG_ATMEL_USART     1
 #undef CONFIG_USART0
 #undef CONFIG_USART1
@@ -63,7 +67,11 @@
 #define CONFIG_LCD_INFO_BELOW_LOGO     1
 #define CONFIG_SYS_WHITE_ON_BLACK              1
 #define CONFIG_ATMEL_LCD               1
+#ifdef CONFIG_AT91SAM9261EK
 #define CONFIG_ATMEL_LCD_BGR555                1
+#else
+#define        CONFIG_AT91SAM9G10_LCD_BASE             0x23E00000      /* LCD is no more in SRAM */
+#endif
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV           1
 
 /* LED */
@@ -126,17 +134,20 @@
 #define CONFIG_SYS_NAND_MASK_CLE               (1 << 21)
 #define CONFIG_SYS_NAND_ENABLE_PIN             AT91_PIN_PC14
 #define CONFIG_SYS_NAND_READY_PIN              AT91_PIN_PC15
+
 #endif
 
 /* NOR flash - no real flash on this board */
 #define CONFIG_SYS_NO_FLASH                    1
 
 /* Ethernet */
+#define CONFIG_NET_MULTI               1
 #define CONFIG_DRIVER_DM9000           1
 #define CONFIG_DM9000_BASE             0x30000000
 #define DM9000_IO                      CONFIG_DM9000_BASE
 #define DM9000_DATA                    (CONFIG_DM9000_BASE + 4)
 #define CONFIG_DM9000_USE_16BIT                1
+#define CONFIG_DM9000_NO_SROM          1
 #define CONFIG_NET_RETRY_COUNT         20
 #define CONFIG_RESET_PHY_R             1
 
@@ -146,7 +157,11 @@
 #define CONFIG_DOS_PARTITION           1
 #define CONFIG_SYS_USB_OHCI_CPU_INIT           1
 #define CONFIG_SYS_USB_OHCI_REGS_BASE          0x00500000      /* AT91SAM9261_UHP_BASE */
+#ifdef CONFIG_AT91SAM9G10EK
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME          "at91sam9g10"
+#else
 #define CONFIG_SYS_USB_OHCI_SLOT_NAME          "at91sam9261"
+#endif
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS     2
 #define CONFIG_USB_STORAGE             1
 #define CONFIG_CMD_FAT                 1
@@ -167,7 +182,7 @@
 #define CONFIG_BOOTCOMMAND     "cp.b 0xC0042000 0x22000000 0x210000; bootm"
 #define CONFIG_BOOTARGS                "console=ttyS0,115200 "                 \
                                "root=/dev/mtdblock0 "                  \
-                               "mtdparts=at91_nand:-(root) "           \
+                               "mtdparts=atmel_nand:-(root) "          \
                                "rw rootfstype=jffs2"
 
 #elif CONFIG_SYS_USE_DATAFLASH_CS3
@@ -181,7 +196,7 @@
 #define CONFIG_BOOTCOMMAND     "cp.b 0xD0042000 0x22000000 0x210000; bootm"
 #define CONFIG_BOOTARGS                "console=ttyS0,115200 "                 \
                                "root=/dev/mtdblock0 "                  \
-                               "mtdparts=at91_nand:-(root) "           \
+                               "mtdparts=atmel_nand:-(root) "          \
                                "rw rootfstype=jffs2"
 
 #else /* CONFIG_SYS_USE_NANDFLASH */
@@ -194,7 +209,7 @@
 #define CONFIG_BOOTCOMMAND     "nand read 0x22000000 0xA0000 0x200000; bootm"
 #define CONFIG_BOOTARGS                "console=ttyS0,115200 "                 \
                                "root=/dev/mtdblock5 "                  \
-                               "mtdparts=at91_nand:128k(bootstrap)ro," \
+                               "mtdparts=atmel_nand:128k(bootstrap)ro,"        \
                                "256k(uboot)ro,128k(env1)ro,"           \
                                "128k(env2)ro,2M(linux),-(root) "       \
                                "rw rootfstype=jffs2"
@@ -211,12 +226,10 @@
 #define CONFIG_SYS_LONGHELP            1
 #define CONFIG_CMDLINE_EDITING 1
 
-#define ROUND(A, B)            (((A) + (B)) & ~((B) - 1))
 /*
  * Size of malloc() pool
  */
 #define CONFIG_SYS_MALLOC_LEN          ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
-#define CONFIG_SYS_GBL_DATA_SIZE       128     /* 128 bytes for initial data */
 
 #define CONFIG_STACKSIZE       (32*1024)       /* regular stack */