+/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2007-2008
* Stelian Pop <stelian@popies.net>
* Lead Tech Design <www.leadtechdesign.com>
*
* Configuation settings for the AT91SAM9261EK board.
- *
- * SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_H
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */
#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* 18.432 MHz crystal */
-#ifdef CONFIG_AT91SAM9G10
-#define CONFIG_AT91SAM9G10EK /* It's an Atmel AT91SAM9G10 EK*/
-#else
-#define CONFIG_AT91SAM9261EK /* It's an Atmel AT91SAM9261 EK*/
-#endif
-
#include <asm/hardware.h>
-#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
-#define CONFIG_ATMEL_LEGACY
-#define CONFIG_SYS_TEXT_BASE 0x21f00000
-
/*
* Hardware drivers
*/
-/* gpio */
-#define CONFIG_AT91_GPIO
-#define CONFIG_AT91_GPIO_PULLUP 1
-
-/* serial console */
-#define CONFIG_ATMEL_USART
-#define CONFIG_USART_BASE ATMEL_BASE_DBGU
-#define CONFIG_USART_ID ATMEL_ID_SYS
-
/* LCD */
#define LCD_BPP LCD_COLOR8
-#define CONFIG_LCD_LOGO
-#undef LCD_TEST_PATTERN
-#define CONFIG_LCD_INFO
-#define CONFIG_LCD_INFO_BELOW_LOGO
-#define CONFIG_ATMEL_LCD
-#ifdef CONFIG_AT91SAM9261EK
-#define CONFIG_ATMEL_LCD_BGR555
-#endif
-
-/* LED */
-#define CONFIG_AT91_LED
-#define CONFIG_RED_LED AT91_PIN_PA23 /* this is the power led */
-#define CONFIG_GREEN_LED AT91_PIN_PA13 /* this is the user1 led */
-#define CONFIG_YELLOW_LED AT91_PIN_PA14 /* this is the user2 led */
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
/* SDRAM */
-#define CONFIG_NR_DRAM_BANKS 1
#define CONFIG_SYS_SDRAM_BASE 0x20000000
#define CONFIG_SYS_SDRAM_SIZE 0x04000000
-#define CONFIG_SYS_INIT_SP_ADDR \
- (ATMEL_BASE_SRAM + 0x1000 - GENERATED_GBL_DATA_SIZE)
-
-/* DataFlash */
-#define CONFIG_ATMEL_DATAFLASH_SPI
-#define CONFIG_HAS_DATAFLASH
-#define CONFIG_SYS_MAX_DATAFLASH_BANKS 2
-#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */
-#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 /* CS3 */
-#define AT91_SPI_CLK 15000000
-#define DATAFLASH_TCSS (0x1a << 16)
-#define DATAFLASH_TCHS (0x1 << 24)
+#define CONFIG_SYS_INIT_RAM_SIZE (16 * 1024)
+#define CONFIG_SYS_INIT_RAM_ADDR ATMEL_BASE_SRAM
/* NAND flash */
#ifdef CONFIG_CMD_NAND
-#define CONFIG_NAND_ATMEL
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE 0x40000000
#define CONFIG_SYS_NAND_DBW_8
#endif
/* Ethernet */
-#define CONFIG_DRIVER_DM9000
#define CONFIG_DM9000_BASE 0x30000000
#define DM9000_IO CONFIG_DM9000_BASE
#define DM9000_DATA (CONFIG_DM9000_BASE + 4)
#define CONFIG_DM9000_USE_16BIT
#define CONFIG_DM9000_NO_SROM
-#define CONFIG_NET_RETRY_COUNT 20
-#define CONFIG_RESET_PHY_R
/* USB */
-#define CONFIG_USB_ATMEL
-#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
-#define CONFIG_USB_OHCI_NEW
-#define CONFIG_SYS_USB_OHCI_CPU_INIT
#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 /* AT91SAM9261_UHP_BASE */
-#ifdef CONFIG_AT91SAM9G10EK
-#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9g10"
-#else
-#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9261"
-#endif
-#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
-
-#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
-
-#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END 0x23e00000
-
-#ifdef CONFIG_SYS_USE_DATAFLASH_CS0
-
-/* bootstrap + u-boot + env + linux in dataflash on CS0 */
-#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
-#define CONFIG_ENV_OFFSET 0x4200
-#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
-#define CONFIG_ENV_SIZE 0x4200
-#define CONFIG_BOOTCOMMAND "cp.b 0xC0084000 0x22000000 0x210000; bootm"
-#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
- "root=/dev/mtdblock0 " \
- "mtdparts=atmel_nand:-(root) " \
- "rw rootfstype=jffs2"
-
-#elif CONFIG_SYS_USE_DATAFLASH_CS3
-
-/* bootstrap + u-boot + env + linux in dataflash on CS3 */
-#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 + 0x8400)
-#define CONFIG_ENV_OFFSET 0x4200
-#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 + CONFIG_ENV_OFFSET)
-#define CONFIG_ENV_SIZE 0x4200
-#define CONFIG_BOOTCOMMAND "cp.b 0xD0084000 0x22000000 0x210000; bootm"
-#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
- "root=/dev/mtdblock0 " \
- "mtdparts=atmel_nand:-(root) " \
- "rw rootfstype=jffs2"
-
-#else /* CONFIG_SYS_USE_NANDFLASH */
-
-/* bootstrap + u-boot + env + linux in nandflash */
-#define CONFIG_ENV_OFFSET 0xc0000
-#define CONFIG_ENV_OFFSET_REDUND 0x100000
-#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */
-#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0x200000 0x300000; bootm"
-#define CONFIG_BOOTARGS \
- "console=ttyS0,115200 earlyprintk " \
- "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \
- "256k(env),256k(env_redundant),256k(spare)," \
- "512k(dtb),6M(kernel)ro,-(rootfs) " \
- "root=/dev/mtdblock7 rw rootfstype=jffs2"
-#endif
-
-#define CONFIG_SYS_CBSIZE 256
-#define CONFIG_SYS_MAXARGS 16
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_AUTO_COMPLETE
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
#endif