+/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2007-2008
* Stelian Pop <stelian@popies.net>
* Lead Tech Design <www.leadtechdesign.com>
*
* Configuation settings for the AT91SAM9260EK & AT91SAM9G20EK boards.
- *
- * SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_H
* Since the linker has to swallow that define, we must use a pure
* hex number here!
*/
-#define CONFIG_SYS_TEXT_BASE 0x21f00000
/* ARM asynchronous clock */
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */
#endif
/* Misc CPU related */
-#define CONFIG_ARCH_CPU_INIT
-#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_SKIP_LOWLEVEL_INIT
/* general purpose I/O */
#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */
* BOOTP options
*/
#define CONFIG_BOOTP_BOOTFILESIZE 1
-#define CONFIG_BOOTP_BOOTPATH 1
-#define CONFIG_BOOTP_GATEWAY 1
-#define CONFIG_BOOTP_HOSTNAME 1
/*
* SDRAM: 1 bank, min 32, max 128 MB
* Initialized before u-boot gets started.
*/
-#define CONFIG_NR_DRAM_BANKS 1
#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1
#define CONFIG_SYS_SDRAM_SIZE 0x04000000
(ATMEL_BASE_SRAM1 + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
#endif
-/*
- * The (arm)linux board id set by generic code depending on configured board
- * (see boards.cfg for different boards)
- */
-#ifdef CONFIG_AT91SAM9G20
- /* the sam9g20 variants have two different board ids */
-# ifdef CONFIG_AT91SAM9G20EK_2MMC
- /* we may be setup for the 2MMC variant of at91sam9g20ek */
-# define CONFIG_MACH_TYPE MACH_TYPE_AT91SAM9G20EK_2MMC
-# else
- /* or the normal at91sam9g20ek */
-# define CONFIG_MACH_TYPE MACH_TYPE_AT91SAM9G20EK
-# endif
-#else
- /* otherwise default to good old at91sam9260ek */
-# define CONFIG_MACH_TYPE MACH_TYPE_AT91SAM9260EK
-#endif
-
/* NAND flash */
#ifdef CONFIG_CMD_NAND
-#define CONFIG_NAND_ATMEL
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3
#define CONFIG_SYS_NAND_DBW_8
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260"
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
-#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
-
-#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END 0x23e00000
-
#ifdef CONFIG_SYS_USE_DATAFLASH_CS0
/* bootstrap + u-boot + env + linux in dataflash on CS0 */
-#define CONFIG_ENV_OFFSET 0x4200
-#define CONFIG_ENV_SIZE 0x4200
-#define CONFIG_ENV_SECT_SIZE 0x210
-#define CONFIG_ENV_SPI_MAX_HZ 15000000
-#define CONFIG_BOOTCOMMAND "sf probe 0:0; " \
- "sf read 0x22000000 0x84000 0x294000; " \
- "bootm 0x22000000"
-
-#elif CONFIG_SYS_USE_DATAFLASH_CS1
-
-#define CONFIG_ENV_OFFSET 0x4200
-#define CONFIG_ENV_SIZE 0x4200
-#define CONFIG_ENV_SECT_SIZE 0x210
-#define CONFIG_ENV_SPI_MAX_HZ 15000000
-#define CONFIG_BOOTCOMMAND "sf probe 0:1; " \
- "sf read 0x22000000 0x84000 0x294000; " \
- "bootm 0x22000000"
-
#elif defined(CONFIG_SYS_USE_NANDFLASH)
/* bootstrap + u-boot + env + linux in nandflash */
-#define CONFIG_ENV_OFFSET 0x120000
-#define CONFIG_ENV_OFFSET_REDUND 0x100000
-#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */
-#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0x200000 0x300000; bootm"
#else /* CONFIG_SYS_USE_MMC */
/* bootstrap + u-boot + env + linux in mmc */
/* For FAT system, most cases it should be in the reserved sector */
-#define CONFIG_ENV_OFFSET 0x2000
-#define CONFIG_ENV_SIZE 0x1000
-#define CONFIG_SYS_MMC_ENV_DEV 0
-
-#define CONFIG_BOOTCOMMAND \
- "fatload mmc 0:1 0x22000000 uImage; bootm"
#endif
-#define CONFIG_SYS_LONGHELP 1
-#define CONFIG_CMDLINE_EDITING 1
-#define CONFIG_AUTO_COMPLETE
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
-
#endif