Merge branch 'next' of git://git.denx.de/u-boot-coldfire

[platform/kernel/u-boot.git] / include / configs / at91rm9200dk.h

diff --git a/include/configs/at91rm9200dk.h b/include/configs/at91rm9200dk.h
index 746f0ef..590c69a 100644 (file)
--- a/include/configs/at91rm9200dk.h
+++ b/include/configs/at91rm9200dk.h
@@ -45,33 +45,28 @@
 #ifndef CONFIG_SKIP_LOWLEVEL_INIT
 #define CONFIG_SYS_USE_MAIN_OSCILLATOR         1
 /* flash */
-#define MC_PUIA_VAL    0x00000000
-#define MC_PUP_VAL     0x00000000
-#define MC_PUER_VAL    0x00000000
-#define MC_ASR_VAL     0x00000000
-#define MC_AASR_VAL    0x00000000
-#define EBI_CFGR_VAL   0x00000000
-#define SMC_CSR0_VAL   0x00003284 /* 16bit, 2 TDF, 4 WS */
+#define CONFIG_SYS_EBI_CFGR_VAL        0x00000000
+#define CONFIG_SYS_SMC_CSR0_VAL        0x00003284 /* 16bit, 2 TDF, 4 WS */
 
 /* clocks */
-#define PLLAR_VAL      0x20263E04 /* 179.712000 MHz for PCK */
-#define PLLBR_VAL      0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */
-#define MCKR_VAL       0x00000202 /* PCK/3 = MCK Master Clock = 59.904000MHz from PLLA */
+#define CONFIG_SYS_PLLAR_VAL   0x20263E04 /* 179.712000 MHz for PCK */
+#define CONFIG_SYS_PLLBR_VAL   0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */
+#define CONFIG_SYS_MCKR_VAL    0x00000202 /* PCK/3 = MCK Master Clock = 59.904000MHz from PLLA */
 
 /* sdram */
-#define PIOC_ASR_VAL   0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */
-#define PIOC_BSR_VAL   0x00000000
-#define PIOC_PDR_VAL   0xFFFF0000
-#define EBI_CSA_VAL    0x00000002 /* CS1=SDRAM */
-#define SDRC_CR_VAL    0x2188c155 /* set up the SDRAM */
-#define SDRAM          0x20000000 /* address of the SDRAM */
-#define SDRAM1         0x20000080 /* address of the SDRAM */
-#define SDRAM_VAL      0x00000000 /* value written to SDRAM */
-#define SDRC_MR_VAL    0x00000002 /* Precharge All */
-#define SDRC_MR_VAL1   0x00000004 /* refresh */
-#define SDRC_MR_VAL2   0x00000003 /* Load Mode Register */
-#define SDRC_MR_VAL3   0x00000000 /* Normal Mode */
-#define SDRC_TR_VAL    0x000002E0 /* Write refresh rate */
+#define CONFIG_SYS_PIOC_ASR_VAL        0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */
+#define CONFIG_SYS_PIOC_BSR_VAL        0x00000000
+#define CONFIG_SYS_PIOC_PDR_VAL        0xFFFF0000
+#define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=CONFIG_SYS_SDRAM */
+#define CONFIG_SYS_SDRC_CR_VAL 0x2188c155 /* set up the CONFIG_SYS_SDRAM */
+#define CONFIG_SYS_SDRAM       0x20000000 /* address of the CONFIG_SYS_SDRAM */
+#define CONFIG_SYS_SDRAM1      0x20000080 /* address of the CONFIG_SYS_SDRAM */
+#define CONFIG_SYS_SDRAM_VAL   0x00000000 /* value written to CONFIG_SYS_SDRAM */
+#define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */
+#define CONFIG_SYS_SDRC_MR_VAL1        0x00000004 /* refresh */
+#define CONFIG_SYS_SDRC_MR_VAL2        0x00000003 /* Load Mode Register */
+#define CONFIG_SYS_SDRC_MR_VAL3        0x00000000 /* Normal Mode */
+#define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */
 #else
 #define CONFIG_SKIP_RELOCATE_UBOOT
 #endif /* CONFIG_SKIP_LOWLEVEL_INIT */
@@ -88,6 +83,7 @@
  */
 
 /* define one of these to choose the DBGU, USART0  or USART1 as console */
+#define CONFIG_AT91RM9200_USART
 #define CONFIG_DBGU
 #undef CONFIG_USART0
 #undef CONFIG_USART1
@@ -116,39 +112,8 @@
 
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_MII
-#define CONFIG_CMD_NAND
-
-#define CONFIG_NAND_LEGACY
-
-#define CONFIG_SYS_MAX_NAND_DEVICE     1       /* Max number of NAND devices           */
-#define SECTORSIZE 512
-
-#define ADDR_COLUMN 1
-#define ADDR_PAGE 2
-#define ADDR_COLUMN_PAGE 3
-
-#define NAND_ChipID_UNKNOWN    0x00
-#define NAND_MAX_FLOORS 1
-#define NAND_MAX_CHIPS 1
-
-#define AT91_SMART_MEDIA_ALE (1 << 22) /* our ALE is AD22 */
-#define AT91_SMART_MEDIA_CLE (1 << 21) /* our CLE is AD21 */
 
 #include <asm/arch/AT91RM9200.h>       /* needed for port definitions */
-#define NAND_DISABLE_CE(nand) do { *AT91C_PIOC_SODR = AT91C_PIO_PC0;} while(0)
-#define NAND_ENABLE_CE(nand) do { *AT91C_PIOC_CODR = AT91C_PIO_PC0;} while(0)
-
-#define NAND_WAIT_READY(nand) while (!(*AT91C_PIOC_PDSR & AT91C_PIO_PC2))
-
-#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr | AT91_SMART_MEDIA_CLE) = (__u8)(d); } while(0)
-#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr | AT91_SMART_MEDIA_ALE) = (__u8)(d); } while(0)
-#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0)
-#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr))
-/* the following are NOP's in our implementation */
-#define NAND_CTL_CLRALE(nandptr)
-#define NAND_CTL_SETALE(nandptr)
-#define NAND_CTL_CLRCLE(nandptr)
-#define NAND_CTL_SETCLE(nandptr)
 
 #define CONFIG_NR_DRAM_BANKS 1
 #define PHYS_SDRAM 0x20000000