MIPS: convert CONFIG_SYS_MIPS_TIMER_FREQ to Kconfig

[platform/kernel/u-boot.git] / include / configs / at91-sama5_common.h

diff --git a/include/configs/at91-sama5_common.h b/include/configs/at91-sama5_common.h
index 6e9793a..4631acf 100644 (file)
--- a/include/configs/at91-sama5_common.h
+++ b/include/configs/at91-sama5_common.h
@@ -15,60 +15,4 @@
 #define CONFIG_SYS_AT91_SLOW_CLOCK      32768
 #define CONFIG_SYS_AT91_MAIN_CLOCK      12000000 /* from 12 MHz crystal */
 
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#endif
-
-/* general purpose I/O */
-#if !CONFIG_IS_ENABLED(DM_GPIO)
-#define CONFIG_AT91_GPIO
-#endif
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-/*
- * Command line configuration.
- */
-
-#ifdef CONFIG_SD_BOOT
-
-#ifdef CONFIG_ENV_IS_IN_MMC
-#define CONFIG_SYS_MMC_ENV_DEV         0
-#endif
-
-#define CONFIG_BOOTCOMMAND     "if test ! -n ${dtb_name}; then "       \
-                                   "setenv dtb_name at91-${board_name}.dtb; " \
-                               "fi; "                                  \
-                               "fatload mmc 0:1 0x21000000 ${dtb_name}; " \
-                               "fatload mmc 0:1 0x22000000 zImage; "   \
-                               "bootz 0x22000000 - 0x21000000"
-
-#else
-
-#ifdef CONFIG_NAND_BOOT
-/* u-boot env in nand flash */
-#define CONFIG_BOOTCOMMAND             "nand read 0x21000000 0x180000 0x80000;"        \
-                                       "nand read 0x22000000 0x200000 0x600000;"       \
-                                       "bootz 0x22000000 - 0x21000000"
-#elif CONFIG_SPI_BOOT
-/* u-boot env in serial flash, by default is bus 0 and cs 0 */
-#define CONFIG_BOOTCOMMAND             "sf probe 0; "                          \
-                                       "sf read 0x21000000 0x60000 0xc000; "   \
-                                       "sf read 0x22000000 0x6c000 0x394000; " \
-                                       "bootz 0x22000000 - 0x21000000"
-#elif CONFIG_QSPI_BOOT
-#define CONFIG_BOOTCOMMAND             "sf probe 0; "                                  \
-                                       "sf read 0x21000000 0x180000 0x80000; "         \
-                                       "sf read 0x22000000 0x200000 0x600000; "        \
-                                       "bootz 0x22000000 - 0x21000000"
-#endif
-
-#endif
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN          (4 * 1024 * 1024)
-
 #endif