#ifndef __AT91_SAMA5_COMMON_H
#define __AT91_SAMA5_COMMON_H
+#include <linux/kconfig.h>
+
/* ARM asynchronous clock */
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#endif
-
-/* general purpose I/O */
-#ifndef CONFIG_DM_GPIO
-#define CONFIG_AT91_GPIO
-#endif
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-/*
- * Command line configuration.
- */
-
-#ifdef CONFIG_SD_BOOT
-
-#ifdef CONFIG_ENV_IS_IN_MMC
-#define CONFIG_SYS_MMC_ENV_DEV 0
-#endif
-
-#define CONFIG_BOOTCOMMAND "if test ! -n ${dtb_name}; then " \
- "setenv dtb_name at91-${board_name}.dtb; " \
- "fi; " \
- "fatload mmc 0:1 0x21000000 ${dtb_name}; " \
- "fatload mmc 0:1 0x22000000 zImage; " \
- "bootz 0x22000000 - 0x21000000"
-
-#else
-
-#ifdef CONFIG_NAND_BOOT
-/* u-boot env in nand flash */
-#define CONFIG_BOOTCOMMAND "nand read 0x21000000 0x180000 0x80000;" \
- "nand read 0x22000000 0x200000 0x600000;" \
- "bootz 0x22000000 - 0x21000000"
-#elif CONFIG_SPI_BOOT
-/* u-boot env in serial flash, by default is bus 0 and cs 0 */
-#define CONFIG_BOOTCOMMAND "sf probe 0; " \
- "sf read 0x21000000 0x60000 0xc000; " \
- "sf read 0x22000000 0x6c000 0x394000; " \
- "bootz 0x22000000 - 0x21000000"
-#elif CONFIG_QSPI_BOOT
-#define CONFIG_BOOTCOMMAND "sf probe 0; " \
- "sf read 0x21000000 0x180000 0x80000; " \
- "sf read 0x22000000 0x200000 0x600000; " \
- "bootz 0x22000000 - 0x21000000"
-#endif
-
-#endif
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
-
#endif