#ifndef __ARISTAINETOS2_CONFIG_H
#define __ARISTAINETOS2_CONFIG_H
-#define CONFIG_HOSTNAME "aristainetos2"
-
-#define CONFIG_MXC_UART_BASE UART2_BASE
+#if (CONFIG_SYS_BOARD_VERSION == 5)
#define CONSOLE_DEV "ttymxc1"
-
-#define CONFIG_FEC_XCV_TYPE RGMII
+#elif (CONFIG_SYS_BOARD_VERSION == 6)
+#define CONSOLE_DEV "ttymxc0"
+#endif
/* Framebuffer */
-#define CONFIG_SYS_LDB_CLOCK 28341000
-#define CONFIG_LG4573
+#define CFG_SYS_LDB_CLOCK 28341000
#include "mx6_common.h"
-#define CONFIG_MACH_TYPE 4501
-#define CONFIG_MMCROOT "/dev/mmcblk0p1"
/* MMC Configs */
-#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC1_BASE_ADDR
+#define CFG_SYS_FSL_ESDHC_ADDR USDHC1_BASE_ADDR
-#define IMX_FEC_BASE ENET_BASE_ADDR
-#define CONFIG_ETHPRIME "FEC"
#define CONFIG_FEC_MXC_PHYADDR 0
-#define CONFIG_SYS_SPI_ST_ENABLE_WP_PIN
-
#ifdef CONFIG_IMX_HAB
#define HAB_EXTRA_SETTINGS \
"hab_check_addr=" \
"enable_hab_check=1\0"
#else
#define HAB_EXTRA_SETTINGS \
+ "hab_check_addr=echo HAB check addr always returns " \
+ "true;true\0" \
"hab_check_file_fit=echo HAB check FIT file always returns " \
"true;true\0" \
"hab_check_flash_fit=echo HAB check flash FIT always returns " \
"enable_hab_check=0\0"
#endif
-#if (CONFIG_SYS_BOARD_VERSION == 3)
-#define CONFIG_EXTRA_ENV_BOARD_SETTINGS \
- "dead=led led_red on\0" \
- "mtdids=nand0=gpmi-nand,nor0=spi0.0\0" \
- "mtdparts=mtdparts=spi0.0:832k(u-boot),64k(env),64k(env-red)," \
- "-(ubi-nor);gpmi-nand:-(ubi)\0" \
- "addmisc=setenv bootargs ${bootargs} net.ifnames=0 consoleblank=0 " \
- "bootmode=${bootmode} mmcpart=${mmcpart}\0" \
- "mainboot=echo Booting from SD-card ...; " \
- "run mainargs addmtd addmisc;" \
- "if test -n ${addmiscM}; then run addmiscM;fi;" \
- "if test -n ${addmiscC}; then run addmiscC;fi;" \
- "if test -n ${addmiscD}; then run addmiscD;fi;" \
- "run boot_board_type;" \
- "bootm ${fit_addr_r}\0" \
- "mainargs=setenv bootargs console=${console},${baudrate} " \
- "root=${mmcroot}\0" \
- "main_load_fit=ext4load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \
- "${fit_file}\0" \
- "rescue_load_fit=ext4load mmc ${mmcdev}:${mmcrescuepart} " \
- "${fit_addr_r} ${rescue_fit_file}\0"
-#else
-#define CONFIG_EXTRA_ENV_BOARD_SETTINGS \
- "dead=led led_red on\0" \
- "mtdids=nand0=gpmi-nand,nor0=spi3.1\0" \
- "mtdparts=mtdparts=spi3.1:832k(u-boot),64k(env),64k(env-red)," \
- "-(ubi-nor);gpmi-nand:-(ubi)\0" \
- "addmisc=setenv bootargs ${bootargs} net.ifnames=0 consoleblank=0 " \
- "bootmode=${bootmode} mmcpart=${mmcpart}\0" \
- "mainboot=echo Booting from SD-card ...; " \
- "run mainargs addmtd addmisc;" \
- "if test -n ${addmiscM}; then run addmiscM;fi;" \
- "if test -n ${addmiscC}; then run addmiscC;fi;" \
- "if test -n ${addmiscD}; then run addmiscD;fi;" \
- "run boot_board_type;" \
- "bootm ${fit_addr_r}\0" \
- "mainargs=setenv bootargs console=${console},${baudrate} " \
- "root=${mmcroot}\0" \
- "main_load_fit=ext4load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \
- "${fit_file}\0" \
- "rescue_load_fit=ext4load mmc ${mmcdev}:${mmcrescuepart} " \
- "${fit_addr_r} ${rescue_fit_file}\0"
+#if (CONFIG_SYS_BOARD_VERSION == 5)
+#define EXTRA_ENV_BOARD_SETTINGS \
+ "dead=while true; do; " \
+ "led led_red on; sleep 1;" \
+ "led led_red off; sleep 1;" \
+ "done\0"
+#elif (CONFIG_SYS_BOARD_VERSION == 6)
+#define EXTRA_ENV_BOARD_SETTINGS \
+ "dead=while true; do; " \
+ "led led_red on; led led_red2 on; sleep 1;" \
+ "led led_red off; led led_red2 off;; sleep 1;" \
+ "done\0"
#endif
#define CONFIG_EXTRA_ENV_SETTINGS \
"usb_pgood_delay=2000\0" \
"nor_bootdelay=-2\0" \
"script=u-boot.scr\0" \
- "fit_file=/boot/system.itb\0" \
- "rescue_fit_file=/boot/rescue.itb\0" \
"loadaddr=0x12000000\0" \
"fit_addr_r=0x14000000\0" \
- "uboot=/boot/u-boot.imx\0" \
"uboot_sz=d0000\0" \
"panel=lb07wv8\0" \
"splashpos=m,m\0" \
"console=" CONSOLE_DEV "\0" \
- "fdt_high=0xffffffff\0" \
- "initrd_high=0xffffffff\0" \
+ "emmcroot=/dev/mmcblk1p1 rootwait rw\0" \
+ "mk_fitfile_path=setenv fit_file /${sysnum}/system.itb\0" \
+ "mk_rescue_fitfile_path=setenv rescue_fit_file /${rescue_sysnum}/system.itb\0" \
+ "mk_uboot_path=setenv uboot /${sysnum}/u-boot.imx\0" \
+ "mk_pubkey_path=setenv pubkey /${sysnum}/PCR.pem\0" \
+ "mk_rescue_pubkey_path=setenv pubkey /${rescue_sysnum}/PCR.pem\0" \
+ "addmisc=setenv bootargs ${bootargs} net.ifnames=0 consoleblank=0 " \
+ "bootmode=${bootmode} rng_core.default_quality=1000 " \
+ "mmcpart=${mmcpart} emmcpart=${emmcpart} sysnum=${sysnum}\0" \
"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
"boot_board_type=bootm ${fit_addr_r}#${board_type}\0" \
"get_env=mw ${loadaddr} 0 0x20000;" \
"sf protect unlock 0 0x1000000;" \
"mw ${loadaddr} 0 0x20000;" \
"env export -t ${loadaddr} serial# ethaddr " \
- "board_type panel addmisc addmiscM addmiscC addmiscD;" \
+ "board_type panel;" \
"env default -a;" \
"env import -t ${loadaddr}\0" \
"loadbootscript=" \
"loadbootscriptUSBf=" \
"fatload usb 0 ${loadaddr} ${script};\0" \
"bootscriptUSB=echo Running bootscript from usb-stick ...; " \
- "source\0" \
+ "source \0" \
"bootscript=echo Running bootscript from mmc ...; " \
- "source\0" \
+ "source \0" \
"mmcpart=1\0" \
- "mmcrescuepart=3\0" \
"mmcdev=0\0" \
- "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
+ "emmcpart=1\0" \
+ "emmcdev=1\0" \
+ "sysnum=1\0" \
+ "rescue_sysnum=0\0" \
+ "rreason=18\0" \
+ "mainboot=echo Booting from eMMC ...; " \
+ "run mainargs addmtd addmisc;" \
+ "run boot_board_type;" \
+ "bootm ${fit_addr_r}\0" \
+ "mainargs=setenv bootargs console=${console},${baudrate} " \
+ "root=${emmcroot} rootfstype=ext4\0 " \
+ "main_load_fit=run mk_fitfile_path; " \
+ "ext4load mmc ${emmcdev}:${emmcpart} ${fit_addr_r} " \
+ "${fit_file}; " \
+ "imi ${fit_addr_r}\0 " \
+ "rescue_load_fit=run mk_rescue_fitfile_path; " \
+ "ext4load mmc ${emmcdev}:${emmcpart} ${fit_addr_r} " \
+ "${rescue_fit_file}; " \
+ "imi ${fit_addr_r}\0" \
+ "main_load_pubkey=run mk_pubkey_path; " \
+ "setenv hab_check_filetype \"PCR.pem\";" \
+ "env set check_addr ${loadaddr};" \
+ "ext4load mmc ${emmcdev}:${emmcpart} ${loadaddr} " \
+ "${pubkey}\0" \
+ "rescue_load_pubkey=run mk_rescue_pubkey_path; " \
+ "setenv hab_check_filetype \"PCR.pem\";" \
+ "env set check_addr ${loadaddr};" \
+ "ext4load mmc ${emmcdev}:${emmcpart} ${loadaddr} " \
+ "${pubkey}\0" \
+ "mainRargs=setenv bootargs console=${console},${baudrate} " \
+ "rescue_sysnum=${rescue_sysnum} root=${emmcroot} rootfstype=ext4\0" \
+ "mmcroot=/dev/mmcblk0p1 rootwait rw\0" \
"mmcargs=setenv bootargs console=${console},${baudrate} " \
"root=${mmcroot}\0" \
+ "mmcRargs=setenv bootargs console=${console},${baudrate} " \
+ "rescue_sysnum=${rescue_sysnum} root=${mmcroot}\0" \
"mmcboot=echo Booting from mmc ...; " \
"run mmcargs addmtd addmisc;" \
- "if test -n ${addmiscM}; then run addmiscM;fi;" \
- "if test -n ${addmiscC}; then run addmiscC;fi;" \
- "if test -n ${addmiscD}; then run addmiscD;fi;" \
"run boot_board_type;" \
"bootm ${fit_addr_r}\0" \
- "mmc_load_fit=ext4load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \
+ "mmc_load_fit=run mk_fitfile_path; " \
+ "ext4load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \
"${fit_file}\0" \
- "mmc_load_uboot=ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
- "${uboot}\0" \
- "mmc_rescue_load_fit=ext4load mmc ${mmcdev}:${mmcrescuepart} " \
+ "imi ${fit_addr_r}\0" \
+ "mmc_rescue_load_fit=run mk_rescue_fitfile_path; " \
+ "ext4load mmc ${mmcdev}:${mmcpart} " \
"${fit_addr_r} ${rescue_fit_file}\0" \
+ "imi ${fit_addr_r}\0" \
+ "mmc_load_uboot=run mk_uboot_path; " \
+ "ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
+ "${uboot}\0" \
"mmc_upd_uboot=mw.b ${loadaddr} 0xff ${uboot_sz};" \
"setexpr cmp_buf ${loadaddr} + ${uboot_sz};" \
"setexpr uboot_maxsize ${uboot_sz} - 400;" \
"sf write ${loadaddr} 400 ${filesize};" \
"sf read ${cmp_buf} 400 ${uboot_sz};" \
"cmp.b ${loadaddr} ${cmp_buf} ${uboot_maxsize}\0" \
- "rescueargs=setenv bootargs console=${console},${baudrate} " \
- "root=/dev/ram rw\0 " \
+ "mmc_load_pubkey=run mk_pubkey_path; " \
+ "setenv hab_check_filetype \"PCR.pem\";" \
+ "env set check_addr ${loadaddr};" \
+ "ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
+ "${pubkey}\0" \
+ "mmc_rescue_load_pubkey=run mk_rescue_pubkey_path; " \
+ "setenv hab_check_filetype \"PCR.pem\";" \
+ "env set check_addr ${loadaddr};" \
+ "ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
+ "${pubkey}\0" \
"rescueboot=echo Booting rescue system ...; " \
- "run rescueargs addmtd addmisc;" \
+ "run addmtd addmisc;" \
"if test -n ${rescue_reason}; then run rescue_reason;fi;" \
- "if test -n ${addmiscM}; then run addmiscM;fi;" \
- "if test -n ${addmiscC}; then run addmiscC;fi;" \
- "if test -n ${addmiscD}; then run addmiscD;fi;" \
"run boot_board_type;" \
"if bootm ${fit_addr_r}; then ; " \
"else " \
"fi; \0" \
"r_reason_syserr=setenv rescue_reason setenv bootargs " \
"\\\\${bootargs} " \
- "rescueReason=18\0 " \
- "usb_load_fit=ext4load usb 0 ${fit_addr_r} ${fit_file}\0" \
- "usb_load_fitf=fatload usb 0 ${fit_addr_r} ${fit_file}\0" \
- "usb_load_rescuefit=ext4load usb 0 ${fit_addr_r} " \
+ "rescueReason=$rreason\0 " \
+ "usb_load_fit=run mk_fitfile_path; " \
+ "ext4load usb 0 ${fit_addr_r} ${fit_file}\0" \
+ "usb_load_fitf=run mk_fitfile_path; " \
+ "fatload usb 0 ${fit_addr_r} ${fit_file}\0" \
+ "usb_load_rescuefit=run mk_rescue_fitfile_path; " \
+ "ext4load usb 0 ${fit_addr_r} " \
"${rescue_fit_file}\0" \
- "usb_load_rescuefitf=fatload usb 0 ${fit_addr_r} " \
+ "usb_load_rescuefitf=run mk_rescue_fitfile_path; " \
+ "fatload usb 0 ${fit_addr_r} " \
"${rescue_fit_file}\0" \
+ "usb_load_pubkey=run mk_pubkey_path; " \
+ "setenv hab_check_filetype \"PCR.pem\";" \
+ "env set check_addr ${loadaddr};" \
+ "ext4load usb 0 ${loadaddr} ${pubkey}\0" \
+ "usb_rescue_load_pubkey=run mk_rescue_pubkey_path; " \
+ "setenv hab_check_filetype \"PCR.pem\";" \
+ "env set check_addr ${loadaddr};" \
+ "ext4load usb 0 ${loadaddr} ${pubkey}\0" \
+ "usb_load_pubkeyf=run mk_pubkey_path; " \
+ "setenv hab_check_filetype \"PCR.pem\";" \
+ "env set check_addr ${loadaddr};" \
+ "fatload usb 0 ${loadaddr} ${pubkey}\0" \
+ "usb_rescue_load_pubkeyf=run mk_rescue_pubkey_path; " \
+ "setenv hab_check_filetype \"PCR.pem\";" \
+ "env set check_addr ${loadaddr};" \
+ "fatload usb 0 ${loadaddr} ${pubkey}\0" \
"usbroot=/dev/sda1 rootwait rw\0" \
"usbboot=echo Booting from usb-stick ...; " \
"run usbargs addmtd addmisc;" \
- "if test -n ${addmiscM}; then run addmiscM;fi;" \
- "if test -n ${addmiscC}; then run addmiscC;fi;" \
- "if test -n ${addmiscD}; then run addmiscD;fi;" \
"run boot_board_type;" \
"bootm ${fit_addr_r}\0" \
"usbargs=setenv bootargs console=${console},${baudrate} " \
"root=${usbroot}\0" \
+ "usbRargs=setenv bootargs console=${console},${baudrate} " \
+ "rescue_sysnum=${rescue_sysnum} root=${usbroot} rw\0 " \
"mmc_rescue_boot=" \
"run r_reason_syserr;" \
- "if run mmc_rescue_load_fit hab_check_file_fit; then " \
- "run rescueboot; " \
+ "if run mmc_rescue_load_pubkey hab_check_addr " \
+ "mmc_rescue_load_fit hab_check_file_fit; then " \
+ "run mmcRargs; run rescueboot; " \
"else " \
- "run dead; " \
"echo RESCUE SYSTEM FROM SD-CARD BOOT FAILURE;" \
+ "run dead; " \
"fi;\0" \
"main_rescue_boot=" \
- "if run main_load_fit hab_check_flash_fit; then " \
+ "if run main_load_pubkey hab_check_addr " \
+ "main_load_fit hab_check_flash_fit; then " \
"if run mainboot; then ; " \
"else " \
"run r_reason_syserr;" \
- "if run rescue_load_fit hab_check_file_fit;" \
- "then run rescueboot; " \
+ "if run rescue_load_pubkey hab_check_addr " \
+ "rescue_load_fit hab_check_file_fit; then " \
+ "run mainRargs; run rescueboot; " \
"else " \
- "run dead; " \
"echo RESCUE SYSTEM BOOT FAILURE;" \
+ "run dead; " \
"fi; " \
"fi; " \
"else " \
"run r_reason_syserr;" \
- "if run rescue_load_fit hab_check_file_fit; then " \
- "run rescueboot; " \
+ "if run rescue_load_pubkey hab_check_addr " \
+ "rescue_load_fit hab_check_file_fit; then " \
+ "run mainRargs; run rescueboot; " \
"else " \
- "run dead; " \
"echo RESCUE SYSTEM BOOT FAILURE;" \
+ "run dead; " \
"fi; " \
"fi;\0" \
"usb_mmc_rescue_boot=" \
"hab_check_file_bootscript;" \
"then run bootscriptUSB; " \
"fi; " \
- "if run usb_load_fit hab_check_file_fit; then " \
+ "if run usb_load_pubkey hab_check_addr " \
+ "usb_load_fit hab_check_file_fit; then " \
"run usbboot; " \
"fi; " \
- "if run usb_load_fitf hab_check_file_fit; then " \
+ "if run usb_load_pubkeyf hab_check_addr " \
+ "usb_load_fitf hab_check_file_fit; then " \
"run usbboot; " \
"fi; "\
- "if run usb_load_rescuefit hab_check_file_fit;" \
- "then run r_reason_syserr rescueboot;" \
+ "if run usb_rescue_load_pubkey hab_check_addr " \
+ "usb_load_rescuefit hab_check_file_fit; then " \
+ "run r_reason_syserr usbRargs; run rescueboot;" \
"fi; " \
- "if run usb_load_rescuefitf hab_check_file_fit;" \
- "then run r_reason_syserr rescueboot;" \
+ "if run usb_rescue_load_pubkeyf hab_check_addr " \
+ "usb_load_rescuefitf hab_check_file_fit; then " \
+ "run r_reason_syserr usbRargs; run rescueboot;" \
"fi; " \
"run mmc_rescue_boot;" \
"fi; "\
"if test ${bootmode} -ne 0 ; then " \
"mmc dev ${mmcdev};" \
"if mmc rescan; then " \
- "if run mmc_rescue_load_fit " \
- "hab_check_file_fit; then " \
- "run rescueboot; " \
+ "if run mmc_rescue_load_pubkey " \
+ "hab_check_addr " \
+ "mmc_rescue_load_fit " \
+ "hab_check_file_fit; then " \
+ "run mmcRargs; run rescueboot; " \
"else " \
"usb start;" \
"if usb storage; then " \
- "if run usb_load_rescuefit " \
- "hab_check_file_fit;"\
- "then " \
- "run rescueboot;" \
+ "if run usb_rescue_load_pubkey " \
+ "hab_check_addr " \
+ "usb_load_rescuefit " \
+ "hab_check_file_fit; then " \
+ "run usbRargs; run rescueboot;" \
"fi; " \
- "if run usb_load_rescuefitf "\
- "hab_check_file_fit;"\
- "then " \
- "run rescueboot;" \
+ "if run usb_rescue_load_pubkeyf " \
+ "hab_check_addr " \
+ "usb_load_rescuefitf " \
+ "hab_check_file_fit; then " \
+ "run usbRargs; run rescueboot;" \
"fi; " \
"fi;" \
"fi;" \
- "run dead; " \
"echo RESCUE SYSTEM ON SD OR " \
"USB BOOT FAILURE;" \
+ "run dead; " \
"else " \
"usb start;" \
"if usb storage; then " \
- "if run usb_load_rescuefit " \
- "hab_check_file_fit; then " \
- "run rescueboot;" \
+ "if run usb_rescue_load_pubkey " \
+ "hab_check_addr " \
+ "usb_load_rescuefit " \
+ "hab_check_file_fit; then " \
+ "run usbRargs; run rescueboot;" \
"fi; " \
- "if run usb_load_rescuefitf " \
- "hab_check_file_fit; then " \
- "run rescueboot;" \
+ "if run usb_rescue_load_pubkeyf " \
+ "hab_check_addr " \
+ "usb_load_rescuefitf " \
+ "hab_check_file_fit; then " \
+ "run usbRargs; run rescueboot;" \
"fi; " \
"fi;" \
- "run dead; " \
"echo RESCUE SYSTEM ON USB BOOT FAILURE;" \
+ "run dead; " \
"fi; " \
"else "\
- "if run rescue_load_fit hab_check_file_fit; then " \
- "run rescueboot; " \
+ "if run rescue_load_pubkey hab_check_addr " \
+ "rescue_load_fit hab_check_file_fit; then " \
+ "run mainRargs; run rescueboot; " \
"else " \
- "run dead; " \
"echo RESCUE SYSTEM ON BOARD BOOT FAILURE;" \
+ "run dead; " \
"fi; " \
"fi;\0" \
"ari_boot=if test ${bootmode} -ne 0 ; then " \
"if run loadbootscript hab_check_file_bootscript;" \
"then run bootscript; " \
"fi; " \
- "if run mmc_load_fit hab_check_file_fit; then " \
+ "if run mmc_load_pubkey hab_check_addr " \
+ "mmc_load_fit hab_check_file_fit; then " \
"if run mmcboot; then ; " \
"else " \
"run mmc_rescue_boot;" \
"run main_rescue_boot;" \
"fi; \0"\
HAB_EXTRA_SETTINGS \
- CONFIG_EXTRA_ENV_BOARD_SETTINGS
-
-#define CONFIG_ARP_TIMEOUT 200UL
-
-#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x100000)
-#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
+ EXTRA_ENV_BOARD_SETTINGS
/* Physical Memory Map */
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
-#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
-#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
-
-#define CONFIG_SYS_INIT_SP_OFFSET \
- (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
- (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+#define CFG_SYS_SDRAM_BASE PHYS_SDRAM
+#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
+#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE
-#define CONFIG_SYS_FSL_USDHC_NUM 2
-
-/* NAND stuff */
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_SYS_NAND_BASE 0x40000000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_ONFI_DETECTION
+#define CFG_SYS_FSL_USDHC_NUM 2
/* DMA stuff, needed for GPMI/MXS NAND support */
/* USB Configs */
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS 0
/* UBI support */
-/* Framebuffer */
-/* check this console not needed, after test remove it */
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
-#define CONFIG_IMX_VIDEO_SKIP
-#define CONFIG_VIDEO_LOGO
-#define CONFIG_VIDEO_BMP_LOGO
-#define CONFIG_BMP_16BPP
-#define CONFIG_VIDEO_BMP_RLE8
-
-#define CONFIG_IMX6_PWM_PER_CLK 66000000
+#define CONFIG_ENV_FLAGS_LIST_STATIC "ethaddr:mw,serial#:sw,board_type:sw," \
+ "sysnum:dw,panel:sw,ipaddr:iw,serverip:iw"
#endif /* __ARISTAINETOS2_CONFIG_H */
projects / platform / kernel / u-boot.git / blobdiff