#ifndef __ARISTAINETOS2_CONFIG_H
#define __ARISTAINETOS2_CONFIG_H
-#define CONFIG_HOSTNAME "aristainetos2"
-
-#define CONFIG_MXC_UART_BASE UART2_BASE
+#if (CONFIG_SYS_BOARD_VERSION == 5)
#define CONSOLE_DEV "ttymxc1"
+#elif (CONFIG_SYS_BOARD_VERSION == 6)
+#define CONSOLE_DEV "ttymxc0"
+#endif
+
+/* Framebuffer */
+#define CFG_SYS_LDB_CLOCK 28341000
+
+#include "mx6_common.h"
+
+
+/* MMC Configs */
+#define CFG_SYS_FSL_ESDHC_ADDR USDHC1_BASE_ADDR
+
+#define CONFIG_FEC_MXC_PHYADDR 0
-#define CONFIG_FEC_XCV_TYPE RGMII
+#ifdef CONFIG_IMX_HAB
+#define HAB_EXTRA_SETTINGS \
+ "hab_check_addr=" \
+ "if hab_auth_img ${check_addr} ${filesize} ; then " \
+ "true;" \
+ "else " \
+ "echo \"HAB checks ${hab_check_filetype} " \
+ "failed!\"; " \
+ "false; " \
+ "fi;\0" \
+ "hab_check_file_fit=" \
+ "if env exists enable_hab_check && test " \
+ "${enable_hab_check} -eq 1 ; then " \
+ "setenv hab_check_filetype \"FIT file on SD card " \
+ "or eMMC\";" \
+ "env set check_addr ${fit_addr_r};" \
+ "run hab_check_addr;" \
+ "else " \
+ "true; "\
+ "fi;\0" \
+ "hab_check_file_bootscript=" \
+ "if env exists enable_hab_check && test " \
+ "${enable_hab_check} -eq 1 ; then " \
+ "setenv hab_check_filetype \"Bootscript file\";" \
+ "env set check_addr ${loadaddr};" \
+ "run hab_check_addr;" \
+ "else " \
+ "true; "\
+ "fi;\0" \
+ "hab_check_flash_fit=" \
+ "if env exists enable_hab_check && test " \
+ "${enable_hab_check} -eq 1 ; then " \
+ "setenv hab_check_filetype \"FIT files on flash\";" \
+ "env set check_addr ${fit_addr_r};" \
+ "run hab_check_addr;" \
+ "else " \
+ "true; "\
+ "fi;\0" \
+ "enable_hab_check=1\0"
+#else
+#define HAB_EXTRA_SETTINGS \
+ "hab_check_addr=echo HAB check addr always returns " \
+ "true;true\0" \
+ "hab_check_file_fit=echo HAB check FIT file always returns " \
+ "true;true\0" \
+ "hab_check_flash_fit=echo HAB check flash FIT always returns " \
+ "true;true\0" \
+ "hab_check_file_bootscript=echo HAB check bootscript always " \
+ "returns true;true\0" \
+ "enable_hab_check=0\0"
+#endif
-#define CONFIG_EXTRA_ENV_BOARD_SETTINGS \
- "board_type=aristainetos2_7@1\0" \
+#if (CONFIG_SYS_BOARD_VERSION == 5)
+#define EXTRA_ENV_BOARD_SETTINGS \
+ "dead=while true; do; " \
+ "led led_red on; sleep 1;" \
+ "led led_red off; sleep 1;" \
+ "done\0"
+#elif (CONFIG_SYS_BOARD_VERSION == 6)
+#define EXTRA_ENV_BOARD_SETTINGS \
+ "dead=while true; do; " \
+ "led led_red on; led led_red2 on; sleep 1;" \
+ "led led_red off; led led_red2 off;; sleep 1;" \
+ "done\0"
+#endif
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "disable_giga=yes\0" \
+ "usb_pgood_delay=2000\0" \
"nor_bootdelay=-2\0" \
- "mtdids=nand0=gpmi-nand,nor0=spi3.1\0" \
- "mtdparts=mtdparts=spi3.1:832k(u-boot),64k(env),64k(env-red)," \
- "-(rescue-system);gpmi-nand:-(ubi)\0" \
- "addmisc=setenv bootargs ${bootargs} net.ifnames=0 consoleblank=0\0" \
- "ubiargs=setenv bootargs console=${console},${baudrate} " \
- "ubi.mtd=0,4096 root=ubi0:rootfs rootfstype=ubifs\0 " \
- "ubifs_load_fit=sf probe;ubi part ubi 4096;ubifsmount ubi:rootfs;" \
- "ubifsload ${fit_addr_r} /boot/system.itb; " \
- "imi ${fit_addr_r}\0 "
-
-#define ARISTAINETOS_USB_OTG_PWR IMX_GPIO_NR(4, 15)
-#define ARISTAINETOS_USB_H1_PWR IMX_GPIO_NR(1, 0)
-#define CONFIG_GPIO_ENABLE_SPI_FLASH IMX_GPIO_NR(2, 15)
+ "script=u-boot.scr\0" \
+ "loadaddr=0x12000000\0" \
+ "fit_addr_r=0x14000000\0" \
+ "uboot_sz=d0000\0" \
+ "panel=lb07wv8\0" \
+ "splashpos=m,m\0" \
+ "console=" CONSOLE_DEV "\0" \
+ "emmcroot=/dev/mmcblk1p1 rootwait rw\0" \
+ "mk_fitfile_path=setenv fit_file /${sysnum}/system.itb\0" \
+ "mk_rescue_fitfile_path=setenv rescue_fit_file /${rescue_sysnum}/system.itb\0" \
+ "mk_uboot_path=setenv uboot /${sysnum}/u-boot.imx\0" \
+ "mk_pubkey_path=setenv pubkey /${sysnum}/PCR.pem\0" \
+ "mk_rescue_pubkey_path=setenv pubkey /${rescue_sysnum}/PCR.pem\0" \
+ "addmisc=setenv bootargs ${bootargs} net.ifnames=0 consoleblank=0 " \
+ "bootmode=${bootmode} rng_core.default_quality=1000 " \
+ "mmcpart=${mmcpart} emmcpart=${emmcpart} sysnum=${sysnum}\0" \
+ "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
+ "boot_board_type=bootm ${fit_addr_r}#${board_type}\0" \
+ "get_env=mw ${loadaddr} 0 0x20000;" \
+ "mmc rescan;" \
+ "ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} env.txt;" \
+ "env import -t ${loadaddr}\0" \
+ "default_env=gpio set wp_spi_nor.gpio-hog;" \
+ "sf probe;" \
+ "sf protect unlock 0 0x1000000;" \
+ "mw ${loadaddr} 0 0x20000;" \
+ "env export -t ${loadaddr} serial# ethaddr " \
+ "board_type panel;" \
+ "env default -a;" \
+ "env import -t ${loadaddr}\0" \
+ "loadbootscript=" \
+ "ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
+ "${script};\0" \
+ "loadbootscriptUSB=" \
+ "ext4load usb 0 ${loadaddr} ${script};\0" \
+ "loadbootscriptUSBf=" \
+ "fatload usb 0 ${loadaddr} ${script};\0" \
+ "bootscriptUSB=echo Running bootscript from usb-stick ...; " \
+ "source \0" \
+ "bootscript=echo Running bootscript from mmc ...; " \
+ "source \0" \
+ "mmcpart=1\0" \
+ "mmcdev=0\0" \
+ "emmcpart=1\0" \
+ "emmcdev=1\0" \
+ "sysnum=1\0" \
+ "rescue_sysnum=0\0" \
+ "rreason=18\0" \
+ "mainboot=echo Booting from eMMC ...; " \
+ "run mainargs addmtd addmisc;" \
+ "run boot_board_type;" \
+ "bootm ${fit_addr_r}\0" \
+ "mainargs=setenv bootargs console=${console},${baudrate} " \
+ "root=${emmcroot} rootfstype=ext4\0 " \
+ "main_load_fit=run mk_fitfile_path; " \
+ "ext4load mmc ${emmcdev}:${emmcpart} ${fit_addr_r} " \
+ "${fit_file}; " \
+ "imi ${fit_addr_r}\0 " \
+ "rescue_load_fit=run mk_rescue_fitfile_path; " \
+ "ext4load mmc ${emmcdev}:${emmcpart} ${fit_addr_r} " \
+ "${rescue_fit_file}; " \
+ "imi ${fit_addr_r}\0" \
+ "main_load_pubkey=run mk_pubkey_path; " \
+ "setenv hab_check_filetype \"PCR.pem\";" \
+ "env set check_addr ${loadaddr};" \
+ "ext4load mmc ${emmcdev}:${emmcpart} ${loadaddr} " \
+ "${pubkey}\0" \
+ "rescue_load_pubkey=run mk_rescue_pubkey_path; " \
+ "setenv hab_check_filetype \"PCR.pem\";" \
+ "env set check_addr ${loadaddr};" \
+ "ext4load mmc ${emmcdev}:${emmcpart} ${loadaddr} " \
+ "${pubkey}\0" \
+ "mainRargs=setenv bootargs console=${console},${baudrate} " \
+ "rescue_sysnum=${rescue_sysnum} root=${emmcroot} rootfstype=ext4\0" \
+ "mmcroot=/dev/mmcblk0p1 rootwait rw\0" \
+ "mmcargs=setenv bootargs console=${console},${baudrate} " \
+ "root=${mmcroot}\0" \
+ "mmcRargs=setenv bootargs console=${console},${baudrate} " \
+ "rescue_sysnum=${rescue_sysnum} root=${mmcroot}\0" \
+ "mmcboot=echo Booting from mmc ...; " \
+ "run mmcargs addmtd addmisc;" \
+ "run boot_board_type;" \
+ "bootm ${fit_addr_r}\0" \
+ "mmc_load_fit=run mk_fitfile_path; " \
+ "ext4load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \
+ "${fit_file}\0" \
+ "imi ${fit_addr_r}\0" \
+ "mmc_rescue_load_fit=run mk_rescue_fitfile_path; " \
+ "ext4load mmc ${mmcdev}:${mmcpart} " \
+ "${fit_addr_r} ${rescue_fit_file}\0" \
+ "imi ${fit_addr_r}\0" \
+ "mmc_load_uboot=run mk_uboot_path; " \
+ "ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
+ "${uboot}\0" \
+ "mmc_upd_uboot=mw.b ${loadaddr} 0xff ${uboot_sz};" \
+ "setexpr cmp_buf ${loadaddr} + ${uboot_sz};" \
+ "setexpr uboot_maxsize ${uboot_sz} - 400;" \
+ "mw.b ${cmp_buf} 0x00 ${uboot_sz};" \
+ "run mmc_load_uboot;sf probe;sf erase 0 ${uboot_sz};" \
+ "sf write ${loadaddr} 400 ${filesize};" \
+ "sf read ${cmp_buf} 400 ${uboot_sz};" \
+ "cmp.b ${loadaddr} ${cmp_buf} ${uboot_maxsize}\0" \
+ "mmc_load_pubkey=run mk_pubkey_path; " \
+ "setenv hab_check_filetype \"PCR.pem\";" \
+ "env set check_addr ${loadaddr};" \
+ "ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
+ "${pubkey}\0" \
+ "mmc_rescue_load_pubkey=run mk_rescue_pubkey_path; " \
+ "setenv hab_check_filetype \"PCR.pem\";" \
+ "env set check_addr ${loadaddr};" \
+ "ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
+ "${pubkey}\0" \
+ "rescueboot=echo Booting rescue system ...; " \
+ "run addmtd addmisc;" \
+ "if test -n ${rescue_reason}; then run rescue_reason;fi;" \
+ "run boot_board_type;" \
+ "if bootm ${fit_addr_r}; then ; " \
+ "else " \
+ "run dead; " \
+ "fi; \0" \
+ "r_reason_syserr=setenv rescue_reason setenv bootargs " \
+ "\\\\${bootargs} " \
+ "rescueReason=$rreason\0 " \
+ "usb_load_fit=run mk_fitfile_path; " \
+ "ext4load usb 0 ${fit_addr_r} ${fit_file}\0" \
+ "usb_load_fitf=run mk_fitfile_path; " \
+ "fatload usb 0 ${fit_addr_r} ${fit_file}\0" \
+ "usb_load_rescuefit=run mk_rescue_fitfile_path; " \
+ "ext4load usb 0 ${fit_addr_r} " \
+ "${rescue_fit_file}\0" \
+ "usb_load_rescuefitf=run mk_rescue_fitfile_path; " \
+ "fatload usb 0 ${fit_addr_r} " \
+ "${rescue_fit_file}\0" \
+ "usb_load_pubkey=run mk_pubkey_path; " \
+ "setenv hab_check_filetype \"PCR.pem\";" \
+ "env set check_addr ${loadaddr};" \
+ "ext4load usb 0 ${loadaddr} ${pubkey}\0" \
+ "usb_rescue_load_pubkey=run mk_rescue_pubkey_path; " \
+ "setenv hab_check_filetype \"PCR.pem\";" \
+ "env set check_addr ${loadaddr};" \
+ "ext4load usb 0 ${loadaddr} ${pubkey}\0" \
+ "usb_load_pubkeyf=run mk_pubkey_path; " \
+ "setenv hab_check_filetype \"PCR.pem\";" \
+ "env set check_addr ${loadaddr};" \
+ "fatload usb 0 ${loadaddr} ${pubkey}\0" \
+ "usb_rescue_load_pubkeyf=run mk_rescue_pubkey_path; " \
+ "setenv hab_check_filetype \"PCR.pem\";" \
+ "env set check_addr ${loadaddr};" \
+ "fatload usb 0 ${loadaddr} ${pubkey}\0" \
+ "usbroot=/dev/sda1 rootwait rw\0" \
+ "usbboot=echo Booting from usb-stick ...; " \
+ "run usbargs addmtd addmisc;" \
+ "run boot_board_type;" \
+ "bootm ${fit_addr_r}\0" \
+ "usbargs=setenv bootargs console=${console},${baudrate} " \
+ "root=${usbroot}\0" \
+ "usbRargs=setenv bootargs console=${console},${baudrate} " \
+ "rescue_sysnum=${rescue_sysnum} root=${usbroot} rw\0 " \
+ "mmc_rescue_boot=" \
+ "run r_reason_syserr;" \
+ "if run mmc_rescue_load_pubkey hab_check_addr " \
+ "mmc_rescue_load_fit hab_check_file_fit; then " \
+ "run mmcRargs; run rescueboot; " \
+ "else " \
+ "echo RESCUE SYSTEM FROM SD-CARD BOOT FAILURE;" \
+ "run dead; " \
+ "fi;\0" \
+ "main_rescue_boot=" \
+ "if run main_load_pubkey hab_check_addr " \
+ "main_load_fit hab_check_flash_fit; then " \
+ "if run mainboot; then ; " \
+ "else " \
+ "run r_reason_syserr;" \
+ "if run rescue_load_pubkey hab_check_addr " \
+ "rescue_load_fit hab_check_file_fit; then " \
+ "run mainRargs; run rescueboot; " \
+ "else " \
+ "echo RESCUE SYSTEM BOOT FAILURE;" \
+ "run dead; " \
+ "fi; " \
+ "fi; " \
+ "else " \
+ "run r_reason_syserr;" \
+ "if run rescue_load_pubkey hab_check_addr " \
+ "rescue_load_fit hab_check_file_fit; then " \
+ "run mainRargs; run rescueboot; " \
+ "else " \
+ "echo RESCUE SYSTEM BOOT FAILURE;" \
+ "run dead; " \
+ "fi; " \
+ "fi;\0" \
+ "usb_mmc_rescue_boot=" \
+ "usb start;" \
+ "if usb storage; then " \
+ "if run loadbootscriptUSB " \
+ "hab_check_file_bootscript;" \
+ "then run bootscriptUSB; " \
+ "fi; " \
+ "if run loadbootscriptUSBf " \
+ "hab_check_file_bootscript;" \
+ "then run bootscriptUSB; " \
+ "fi; " \
+ "if run usb_load_pubkey hab_check_addr " \
+ "usb_load_fit hab_check_file_fit; then " \
+ "run usbboot; " \
+ "fi; " \
+ "if run usb_load_pubkeyf hab_check_addr " \
+ "usb_load_fitf hab_check_file_fit; then " \
+ "run usbboot; " \
+ "fi; "\
+ "if run usb_rescue_load_pubkey hab_check_addr " \
+ "usb_load_rescuefit hab_check_file_fit; then " \
+ "run r_reason_syserr usbRargs; run rescueboot;" \
+ "fi; " \
+ "if run usb_rescue_load_pubkeyf hab_check_addr " \
+ "usb_load_rescuefitf hab_check_file_fit; then " \
+ "run r_reason_syserr usbRargs; run rescueboot;" \
+ "fi; " \
+ "run mmc_rescue_boot;" \
+ "fi; "\
+ "run mmc_rescue_boot;\0" \
+ "rescue_xload_boot=" \
+ "run r_reason_syserr;" \
+ "if test ${bootmode} -ne 0 ; then " \
+ "mmc dev ${mmcdev};" \
+ "if mmc rescan; then " \
+ "if run mmc_rescue_load_pubkey " \
+ "hab_check_addr " \
+ "mmc_rescue_load_fit " \
+ "hab_check_file_fit; then " \
+ "run mmcRargs; run rescueboot; " \
+ "else " \
+ "usb start;" \
+ "if usb storage; then " \
+ "if run usb_rescue_load_pubkey " \
+ "hab_check_addr " \
+ "usb_load_rescuefit " \
+ "hab_check_file_fit; then " \
+ "run usbRargs; run rescueboot;" \
+ "fi; " \
+ "if run usb_rescue_load_pubkeyf " \
+ "hab_check_addr " \
+ "usb_load_rescuefitf " \
+ "hab_check_file_fit; then " \
+ "run usbRargs; run rescueboot;" \
+ "fi; " \
+ "fi;" \
+ "fi;" \
+ "echo RESCUE SYSTEM ON SD OR " \
+ "USB BOOT FAILURE;" \
+ "run dead; " \
+ "else " \
+ "usb start;" \
+ "if usb storage; then " \
+ "if run usb_rescue_load_pubkey " \
+ "hab_check_addr " \
+ "usb_load_rescuefit " \
+ "hab_check_file_fit; then " \
+ "run usbRargs; run rescueboot;" \
+ "fi; " \
+ "if run usb_rescue_load_pubkeyf " \
+ "hab_check_addr " \
+ "usb_load_rescuefitf " \
+ "hab_check_file_fit; then " \
+ "run usbRargs; run rescueboot;" \
+ "fi; " \
+ "fi;" \
+ "echo RESCUE SYSTEM ON USB BOOT FAILURE;" \
+ "run dead; " \
+ "fi; " \
+ "else "\
+ "if run rescue_load_pubkey hab_check_addr " \
+ "rescue_load_fit hab_check_file_fit; then " \
+ "run mainRargs; run rescueboot; " \
+ "else " \
+ "echo RESCUE SYSTEM ON BOARD BOOT FAILURE;" \
+ "run dead; " \
+ "fi; " \
+ "fi;\0" \
+ "ari_boot=if test ${bootmode} -ne 0 ; then " \
+ "mmc dev ${mmcdev};" \
+ "if mmc rescan; then " \
+ "if run loadbootscript hab_check_file_bootscript;" \
+ "then run bootscript; " \
+ "fi; " \
+ "if run mmc_load_pubkey hab_check_addr " \
+ "mmc_load_fit hab_check_file_fit; then " \
+ "if run mmcboot; then ; " \
+ "else " \
+ "run mmc_rescue_boot;" \
+ "fi; " \
+ "else " \
+ "run usb_mmc_rescue_boot;" \
+ "fi; " \
+ "else " \
+ "run usb_mmc_rescue_boot;" \
+ "fi; " \
+ "else "\
+ "run main_rescue_boot;" \
+ "fi; \0"\
+ HAB_EXTRA_SETTINGS \
+ EXTRA_ENV_BOARD_SETTINGS
-/* Framebuffer */
-#define CONFIG_SYS_LDB_CLOCK 33246000
-#define CONFIG_LG4573
+/* Physical Memory Map */
+#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
+
+#define CFG_SYS_SDRAM_BASE PHYS_SDRAM
+#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
+#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE
+
+#define CFG_SYS_FSL_USDHC_NUM 2
+
+/* DMA stuff, needed for GPMI/MXS NAND support */
+
+/* USB Configs */
+#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CONFIG_MXC_USB_FLAGS 0
+
+/* UBI support */
-#include "aristainetos-common.h"
+#define CONFIG_ENV_FLAGS_LIST_STATIC "ethaddr:mw,serial#:sw,board_type:sw," \
+ "sysnum:dw,panel:sw,ipaddr:iw,serverip:iw"
#endif /* __ARISTAINETOS2_CONFIG_H */
projects / platform / kernel / u-boot.git / blobdiff