Merge remote-tracking branch 'u-boot-atmel/master'

[platform/kernel/u-boot.git] / include / configs / aria.h

diff --git a/include/configs/aria.h b/include/configs/aria.h
index b6669e7..0b31c50 100644 (file)
--- a/include/configs/aria.h
+++ b/include/configs/aria.h
@@ -49,7 +49,8 @@
 #define CONFIG_E300            1       /* E300 Family */
 #define CONFIG_MPC512X         1       /* MPC512X family */
 #define CONFIG_FSL_DIU_FB      1       /* FSL DIU */
-#define CONFIG_FSL_DIU_LOGO_BMP        1       /* Don't include FSL DIU binary bmp */
+
+#define        CONFIG_SYS_TEXT_BASE    0xFFF00000
 
 /* video */
 #undef CONFIG_VIDEO
@@ -78,6 +79,9 @@
 #define CONFIG_SYS_DDR_SIZE            256             /* MB */
 #define CONFIG_SYS_DDR_BASE            0x00000000
 #define CONFIG_SYS_SDRAM_BASE          CONFIG_SYS_DDR_BASE
+#define CONFIG_SYS_MAX_RAM_SIZE                0x20000000
+
+#define CONFIG_SYS_IOCTRL_MUX_DDR      0x00000036
 
 /* DDR Controller Configuration
  *
@@ -243,13 +247,9 @@
  */
 #define CONFIG_CMD_NAND                                        /* enable NAND support */
 #define CONFIG_JFFS2_NAND                              /* with JFFS2 on it */
-
-
 #define CONFIG_NAND_MPC5121_NFC
 #define CONFIG_SYS_NAND_BASE           0x40000000
-
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
-#define NAND_MAX_CHIPS                 CONFIG_SYS_MAX_NAND_DEVICE
 
 /*
  * Configuration parameters for MPC5121 NAND driver
@@ -295,14 +295,13 @@
 
 /* Use SRAM for initial stack */
 #define CONFIG_SYS_INIT_RAM_ADDR       CONFIG_SYS_SRAM_BASE
-#define CONFIG_SYS_INIT_RAM_END                CONFIG_SYS_SRAM_SIZE
+#define CONFIG_SYS_INIT_RAM_SIZE               CONFIG_SYS_SRAM_SIZE
 
-#define CONFIG_SYS_GBL_DATA_SIZE       0x100
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - \
-                                        CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - \
+                                        GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CONFIG_SYS_MONITOR_BASE                TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE                CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_MONITOR_LEN         (384 * 1024)
 
 #ifdef CONFIG_FSL_DIU_FB
@@ -318,12 +317,12 @@
  * Serial Port
  */
 #define CONFIG_CONS_INDEX              1
-#undef CONFIG_SERIAL_SOFTWARE_FIFO
 
 /*
  * Serial console configuration
  */
 #define CONFIG_PSC_CONSOLE             3       /* console on PSC3 */
+#define CONFIG_SYS_PSC3
 #if CONFIG_PSC_CONSOLE != 3
 #error CONFIG_PSC_CONSOLE must be 3
 #endif
@@ -341,7 +340,6 @@
 /* Use the HUSH parser */
 #define CONFIG_SYS_HUSH_PARSER
 #ifdef  CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 #endif
 
 /*
@@ -396,7 +394,6 @@
  * Ethernet configuration
  */
 #define CONFIG_MPC512x_FEC             1
-#define CONFIG_NET_MULTI
 #define CONFIG_PHY_ADDR                        0x17
 #define CONFIG_MII                     1       /* MII PHY management */
 #define CONFIG_FEC_AN_TIMEOUT          1
@@ -504,10 +501,10 @@
 
 /*
  * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
+ * have to be in the first 256 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CONFIG_SYS_BOOTMAPSZ   (8 << 20)
+#define CONFIG_SYS_BOOTMAPSZ   (256 << 20)
 
 /* Cache Configuration */
 #define CONFIG_SYS_DCACHE_SIZE         32768
@@ -523,14 +520,6 @@
 
 #define CONFIG_HIGH_BATS               1       /* High BATs supported */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD                  0x01
-#define BOOTFLAG_WARM                  0x02
-
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE           230400  /* speed of kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX          2       /* which serial port to use */
@@ -543,8 +532,8 @@
 #define CONFIG_TIMESTAMP
 
 #define CONFIG_HOSTNAME                        aria
-#define CONFIG_BOOTFILE                        aria/uImage
-#define CONFIG_ROOTPATH                        /opt/eldk/ppc_6xx
+#define CONFIG_BOOTFILE                        "aria/uImage"
+#define CONFIG_ROOTPATH                        "/opt/eldk/ppc_6xx"
 
 #define CONFIG_LOADADDR                        400000  /* default load addr */