video: Moving mx3fb.c to CONFIG_VIDEO

[platform/kernel/u-boot.git] / include / configs / aria.h

diff --git a/include/configs/aria.h b/include/configs/aria.h
index 2938eac..0619cf7 100644 (file)
--- a/include/configs/aria.h
+++ b/include/configs/aria.h
@@ -49,7 +49,8 @@
 #define CONFIG_E300            1       /* E300 Family */
 #define CONFIG_MPC512X         1       /* MPC512X family */
 #define CONFIG_FSL_DIU_FB      1       /* FSL DIU */
-#define CONFIG_FSL_DIU_LOGO_BMP        1       /* Don't include FSL DIU binary bmp */
+
+#define        CONFIG_SYS_TEXT_BASE    0xFFF00000
 
 /* video */
 #undef CONFIG_VIDEO
@@ -78,6 +79,9 @@
 #define CONFIG_SYS_DDR_SIZE            256             /* MB */
 #define CONFIG_SYS_DDR_BASE            0x00000000
 #define CONFIG_SYS_SDRAM_BASE          CONFIG_SYS_DDR_BASE
+#define CONFIG_SYS_MAX_RAM_SIZE                0x20000000
+
+#define CONFIG_SYS_IOCTRL_MUX_DDR      0x00000036
 
 /* DDR Controller Configuration
  *
@@ -190,7 +194,7 @@
 
 /*
  * Backward compatible definitions,
- * so we do not have to change cpu/mpc512x/fixed_sdram.c
+ * so we do not have to change arch/powerpc/cpu/mpc512x/fixed_sdram.c
  */
 #define        CONFIG_SYS_DDRCMD_EM2           (CONFIG_SYS_MICRON_EMR2)
 #define CONFIG_SYS_DDRCMD_EM3          (CONFIG_SYS_MICRON_EMR3)
@@ -251,8 +255,6 @@
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define NAND_MAX_CHIPS                 CONFIG_SYS_MAX_NAND_DEVICE
 
-#define CONFIG_SYS_64BIT_VSPRINTF      /* needed for nand_util.c */
-
 /*
  * Configuration parameters for MPC5121 NAND driver
  */
@@ -297,14 +299,13 @@
 
 /* Use SRAM for initial stack */
 #define CONFIG_SYS_INIT_RAM_ADDR       CONFIG_SYS_SRAM_BASE
-#define CONFIG_SYS_INIT_RAM_END                CONFIG_SYS_SRAM_SIZE
+#define CONFIG_SYS_INIT_RAM_SIZE               CONFIG_SYS_SRAM_SIZE
 
-#define CONFIG_SYS_GBL_DATA_SIZE       0x100
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - \
-                                        CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - \
+                                        GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CONFIG_SYS_MONITOR_BASE                TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE                CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_MONITOR_LEN         (384 * 1024)
 
 #ifdef CONFIG_FSL_DIU_FB
@@ -320,7 +321,6 @@
  * Serial Port
  */
 #define CONFIG_CONS_INDEX              1
-#undef CONFIG_SERIAL_SOFTWARE_FIFO
 
 /*
  * Serial console configuration
@@ -398,7 +398,6 @@
  * Ethernet configuration
  */
 #define CONFIG_MPC512x_FEC             1
-#define CONFIG_NET_MULTI
 #define CONFIG_PHY_ADDR                        0x17
 #define CONFIG_MII                     1       /* MII PHY management */
 #define CONFIG_FEC_AN_TIMEOUT          1
@@ -506,10 +505,10 @@
 
 /*
  * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
+ * have to be in the first 256 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CONFIG_SYS_BOOTMAPSZ   (8 << 20)
+#define CONFIG_SYS_BOOTMAPSZ   (256 << 20)
 
 /* Cache Configuration */
 #define CONFIG_SYS_DCACHE_SIZE         32768
@@ -525,14 +524,6 @@
 
 #define CONFIG_HIGH_BATS               1       /* High BATs supported */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD                  0x01
-#define BOOTFLAG_WARM                  0x02
-
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE           230400  /* speed of kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX          2       /* which serial port to use */