imx: wandboard: convert FEC support to DM_ETH

[platform/kernel/u-boot.git] / include / configs / apalis_imx6.h

diff --git a/include/configs/apalis_imx6.h b/include/configs/apalis_imx6.h
index 4b0a3fb..c3bc394 100644 (file)
--- a/include/configs/apalis_imx6.h
+++ b/include/configs/apalis_imx6.h
@@ -42,7 +42,6 @@
 #define CONFIG_SYS_MXC_I2C3_SPEED      400000
 
 /* MMC Configs */
-#define CONFIG_FSL_USDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 #define CONFIG_SYS_FSL_USDHC_NUM       3
 
@@ -58,6 +57,7 @@
 #define IMX_FEC_BASE                   ENET_BASE_ADDR
 #define CONFIG_FEC_XCV_TYPE            RGMII
 #define CONFIG_ETHPRIME                        "FEC"
+#define PHY_ANEG_TIMEOUT               15000 /* PHY needs longer aneg time */
 #define CONFIG_FEC_MXC_PHYADDR         6
 #define CONFIG_TFTP_TSIZE
 
@@ -121,8 +121,8 @@
        "imx6q-apalis-cam-eval.dtb fat 0 1"
 
 #define EMMC_BOOTCMD \
-       "set_emmcargs emmcargs ip=off root=PARTUUID=${uuid} ro,noatime " \
-               "rootfstype=ext4 rootwait\0" \
+       "set_emmcargs=setenv emmcargs ip=off root=PARTUUID=${uuid} " \
+               "ro,noatime rootfstype=ext4 rootwait\0" \
        "emmcboot=run setup; run emmcfinduuid; run set_emmcargs; " \
                "setenv bootargs ${defargs} ${emmcargs} ${setupargs} " \
                "${vidargs}; echo Booting from internal eMMC chip...; " \
@@ -175,27 +175,6 @@
        "sdfinduuid=part uuid mmc ${sddev}:${sdrootpart} uuid\0" \
        "sdrootpart=2\0"
 
-
-#define USB_BOOTCMD \
-       "set_usbargs=setenv usbargs ip=off root=PARTUUID=${uuid} ro,noatime " \
-               "rootfstype=ext4 rootwait\0" \
-       "usbboot=run setup; usb start; run usbfinduuid; run set_usbargs; " \
-               "setenv bootargs ${defargs} ${setupargs} " \
-               "${usbargs} ${vidargs}; echo Booting from USB stick...; " \
-               "run usbdtbload; load usb " \
-               "${usbdev}:${usbbootpart} ${kernel_addr_r} " \
-               "${boot_file} && run fdt_fixup && " \
-               "bootz ${kernel_addr_r} ${dtbparam}\0" \
-       "usbbootpart=1\0" \
-       "usbdev=0\0" \
-       "usbdtbload=setenv dtbparam; load usb ${usbdev}:${usbbootpart} "\
-               "${fdt_addr_r} " \
-               "${fdt_file} && setenv dtbparam \" - " \
-               "${fdt_addr_r}\" && true\0" \
-       "usbfinduuid=part uuid usb ${usbdev}:${usbrootpart} uuid\0" \
-       "usbrootpart=2\0"
-
-
 #ifndef CONFIG_TDX_APALIS_IMX6_V1_0
 #define FDT_FILE "imx6q-apalis-eval.dtb"
 #define FDT_FILE_V1_0 "imx6q-apalis_v1_0-eval.dtb"
@@ -218,7 +197,6 @@
        MEM_LAYOUT_ENV_SETTINGS \
        NFS_BOOTCMD \
        SD_BOOTCMD \
-       USB_BOOTCMD \
        "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
                "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
                "flash_eth.img && source ${loadaddr}\0" \
@@ -235,6 +213,7 @@
                "load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
                "source ${loadaddr}\0" \
        "splashpos=m,m\0" \
+       "splashimage=" __stringify(CONFIG_LOADADDR) "\0" \
        "vidargs=mxc_hdmi.only_cea=1 " \
                "video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24 " \
                "video=mxcfb1:off video=mxcfb2:off video=mxcfb3:off " \