treewide: Migrate CONFIG_SYS_ALT_MEMTEST to Kconfig

[platform/kernel/u-boot.git] / include / configs / ap_sh4a_4a.h

diff --git a/include/configs/ap_sh4a_4a.h b/include/configs/ap_sh4a_4a.h
index bb39491..6df2ff9 100644 (file)
--- a/include/configs/ap_sh4a_4a.h
+++ b/include/configs/ap_sh4a_4a.h
@@ -9,81 +9,32 @@
 #ifndef __AP_SH4A_4A_H
 #define __AP_SH4A_4A_H
 
-#undef DEBUG
 #define CONFIG_CPU_SH7734      1
-#define CONFIG_AP_SH4A_4A      1
 #define CONFIG_400MHZ_MODE     1
-/* #define CONFIG_533MHZ_MODE  1 */
-
-#define CONFIG_BOARD_LATE_INIT
-#define CONFIG_SYS_TEXT_BASE 0x8BFC0000
-
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_ENV
-#define CONFIG_CMD_SAVEENV
-
-#define CONFIG_BAUDRATE                115200
-#define CONFIG_BOOTDELAY       3
-#define CONFIG_BOOTARGS                "console=ttySC4,115200"
-
-#define CONFIG_VERSION_VARIABLE
+
+#define CONFIG_DISPLAY_BOARDINFO
 #undef  CONFIG_SHOW_BOOT_PROGRESS
 
 /* Ether */
-#define CONFIG_SH_ETHER 1
 #define CONFIG_SH_ETHER_USE_PORT (0)
 #define CONFIG_SH_ETHER_PHY_ADDR (0x0)
 #define CONFIG_SH_ETHER_PHY_MODE (PHY_INTERFACE_MODE_GMII)
 #define CONFIG_SH_ETHER_SH7734_MII (0x02) /* GMII */
-#define CONFIG_PHYLIB
-#define CONFIG_PHY_MICREL 1
 #define CONFIG_BITBANGMII
 #define CONFIG_BITBANGMII_MULTI
 
-/* I2C */
-#define CONFIG_CMD_I2C
-#define CONFIG_SH_SH7734_I2C   1
-#define CONFIG_HARD_I2C                        1
-#define CONFIG_I2C_MULTI_BUS   1
-#define CONFIG_SYS_MAX_I2C_BUS 2
-#define CONFIG_SYS_I2C_MODULE  0
-#define CONFIG_SYS_I2C_SPEED   400000 /* 400 kHz */
-#define CONFIG_SYS_I2C_SLAVE   0x50
-#define CONFIG_SH_I2C_DATA_HIGH        4
-#define CONFIG_SH_I2C_DATA_LOW 5
-#define CONFIG_SH_I2C_CLOCK            500000000
-#define CONFIG_SH_I2C_BASE0            0xFFC70000
-#define CONFIG_SH_I2C_BASE1            0xFFC71000
-
 /* undef to save memory        */
-#define CONFIG_SYS_LONGHELP
 /* Monitor Command Prompt */
-/* Buffer size for input from the Console */
-#define CONFIG_SYS_CBSIZE              256
 /* Buffer size for Console output */
 #define CONFIG_SYS_PBSIZE              256
-/* max args accepted for monitor commands */
-#define CONFIG_SYS_MAXARGS             16
-/* Buffer size for Boot Arguments passed to kernel */
-#define CONFIG_SYS_BARGSIZE    512
 /* List of legal baudrate settings for this board */
 #define CONFIG_SYS_BAUDRATE_TABLE      { 115200 }
 
 /* SCIF */
-#define CONFIG_SCIF_CONSOLE    1
 #define CONFIG_SCIF                    1
 #define CONFIG_CONS_SCIF4      1
 
 /* Suppress display of console information at boot */
-#undef  CONFIG_SYS_CONSOLE_INFO_QUIET
-#undef  CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
-#undef  CONFIG_SYS_CONSOLE_ENV_OVERWRITE
 
 /* SDRAM */
 #define CONFIG_SYS_SDRAM_BASE  (0x88000000)
@@ -93,7 +44,6 @@
 #define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE)
 #define CONFIG_SYS_MEMTEST_END  (CONFIG_SYS_MEMTEST_START + CONFIG_SYS_SDRAM_SIZE)
 /* Enable alternate, more extensive, memory test */
-#undef  CONFIG_SYS_ALT_MEMTEST
 /* Scratch address used by the alternate memory test */
 #undef  CONFIG_SYS_MEMTEST_SCRATCH
 
@@ -134,12 +84,9 @@
 #define CONFIG_SYS_MONITOR_LEN (256 * 1024)
 /* Size of DRAM reserved for malloc() use */
 #define CONFIG_SYS_MALLOC_LEN  (256 * 1024)
-/* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_SIZE       (256)
 #define CONFIG_SYS_BOOTMAPSZ   (8 * 1024 * 1024)
 
 /* ENV setting */
-#define CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_ENV_OVERWRITE   1
 #define CONFIG_ENV_SECT_SIZE   (128 * 1024)
 #define CONFIG_ENV_SIZE                (CONFIG_ENV_SECT_SIZE)