Convert CONFIG_CMD_IRQ to Kconfig

[platform/kernel/u-boot.git] / include / configs / amcc-common.h

diff --git a/include/configs/amcc-common.h b/include/configs/amcc-common.h
index 1dc44fc..450a2eb 100644 (file)
--- a/include/configs/amcc-common.h
+++ b/include/configs/amcc-common.h
@@ -4,20 +4,7 @@
  *
  * Common configuration options for all AMCC boards
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __AMCC_COMMON_H
@@ -31,11 +18,11 @@
 /*
  * UART
  */
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
+#ifndef CONFIG_DM_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_serial_clock()
-#define CONFIG_BAUDRATE                115200
+#endif
 #define CONFIG_SYS_BAUDRATE_TABLE  \
     {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
 
@@ -62,32 +49,13 @@
 /*
  * Commands
  */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
 #if defined(CONFIG_440)
-#define CONFIG_CMD_CACHE
 #endif
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_GREPENV
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_PING
 #define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_SETEXPR
 
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_BOOTDELAY       5       /* autoboot after 5 seconds     */
-#define CONFIG_SYS_LONGHELP                    /* undef to save memory         */
-#define CONFIG_SYS_PROMPT              "=> "   /* Monitor Command Prompt       */
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_SYS_CBSIZE              1024    /* Console I/O Buffer Size      */
 #else
@@ -103,22 +71,13 @@
 #define CONFIG_SYS_LOAD_ADDR           0x100000  /* default load address       */
 #define CONFIG_SYS_EXTBDINFO                   /* To use extended board_into (bd_t) */
 
-#define CONFIG_SYS_HZ                  1000    /* decrementer freq: 1 ms ticks */
-
 #define CONFIG_CMDLINE_EDITING         /* add command line history     */
 #define CONFIG_AUTO_COMPLETE           /* add autocompletion support   */
-#define CONFIG_LOOPW                   /* enable loopw command         */
 #define CONFIG_MX_CYCLIC               /* enable mdc/mwc commands      */
-#define CONFIG_ZERO_BOOTDELAY_CHECK    /* check for keypress on bootdelay==0 */
-#define CONFIG_VERSION_VARIABLE        /* include version env variable */
-#define CONFIG_SYS_CONSOLE_INFO_QUIET  /* don't print console @ startup*/
-
-#define CONFIG_SYS_HUSH_PARSER         /* Use the HUSH parser          */
 
 #define CONFIG_LOADS_ECHO              /* echo on for serial download  */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE   /* allow baudrate change        */
 
-#define CONFIG_REGEX                   /* Enable regular expression support */
 /*
  * BOOTP options
  */
@@ -141,14 +100,8 @@
  */
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port*/
-#define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use     */
 #endif
 
-/*
- * Pass open firmware flat tree
- */
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
 /* Update size in "reg" property of NOR FLASH device tree nodes */
 #define CONFIG_FDT_FIXUP_NOR_FLASH_SIZE
 
@@ -270,10 +223,4 @@
                "cp.b ${fileaddr} " __stringify(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0" \
        "upd=run load update\0"                                         \
 
-#define CONFIG_AMCC_DEF_ENV_NAND_UPD                                   \
-       "u-boot-nand=" __stringify(CONFIG_HOSTNAME) "/u-boot-nand.bin\0"\
-       "nload=tftp 200000 ${u-boot-nand}\0"                            \
-       "nupdate=nand erase 0 100000;nand write 200000 0 100000\0"      \
-       "nupd=run nload nupdate\0"
-
 #endif /* __AMCC_COMMON_H */