+/* SPDX-License-Identifier: GPL-2.0+ */
/*
* am43xx_evm.h
*
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- *
- * SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_AM43XX_EVM_H
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
/* Power */
+#ifndef CONFIG_DM_I2C
#define CONFIG_POWER
#define CONFIG_POWER_I2C
+#endif
#define CONFIG_POWER_TPS65218
#define CONFIG_POWER_TPS62362
/* SPL defines. */
-#define CONFIG_SPL_TEXT_BASE CONFIG_ISW_ENTRY_ADDR
#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \
(128 << 20))
/* Always 64 KiB env size */
#define CONFIG_ENV_SIZE (64 << 10)
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-
/* Clock Defines */
#define V_OSCK 24000000 /* Clock output from T2 */
#define V_SCLK (V_OSCK)
#define CONFIG_SYS_USB_FAT_BOOT_PARTITION 1
#define CONFIG_USB_XHCI_OMAP
-#define CONFIG_OMAP_USB_PHY
#define CONFIG_AM437X_USB2PHY2_HOST
#endif
-#if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_USBETH_SUPPORT)
+#if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_USB_ETHER)
#undef CONFIG_USB_DWC3_PHY_OMAP
#undef CONFIG_USB_DWC3_OMAP
#undef CONFIG_USB_DWC3
#undef CONFIG_USB_GADGET_DOWNLOAD
#undef CONFIG_USB_GADGET_VBUS_DRAW
-#undef CONFIG_G_DNL_MANUFACTURER
-#undef CONFIG_G_DNL_VENDOR_NUM
-#undef CONFIG_G_DNL_PRODUCT_NUM
+#undef CONFIG_USB_GADGET_MANUFACTURER
+#undef CONFIG_USB_GADGET_VENDOR_NUM
+#undef CONFIG_USB_GADGET_PRODUCT_NUM
#undef CONFIG_USB_GADGET_DUALSPEED
#endif
#endif
#ifdef CONFIG_QSPI_BOOT
-#ifndef CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_TEXT_BASE CONFIG_ISW_ENTRY_ADDR
-#endif
#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
-#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
#define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64 KB sectors */
#define CONFIG_ENV_OFFSET 0x110000
#define CONFIG_ENV_OFFSET_REDUND 0x120000
-#ifdef MTDIDS_DEFAULT
-#undef MTDIDS_DEFAULT
-#endif
-#ifdef MTDPARTS_DEFAULT
-#undef MTDPARTS_DEFAULT
#endif
-#define MTDPARTS_DEFAULT "mtdparts=qspi.0:512k(QSPI.u-boot)," \
- "512k(QSPI.u-boot.backup)," \
- "512k(QSPI.u-boot-spl-os)," \
- "64k(QSPI.u-boot-env)," \
- "64k(QSPI.u-boot-env.backup)," \
- "8m(QSPI.kernel)," \
- "-(QSPI.file-system)"
-#endif
-
-/* SPI */
-#undef CONFIG_OMAP3_SPI
-#define CONFIG_TI_SPI_MMAP
-#define CONFIG_QSPI_SEL_GPIO 48
-#define CONFIG_SF_DEFAULT_SPEED 48000000
-#define CONFIG_SF_DEFAULT_MODE SPI_MODE_3
-#define CONFIG_QSPI_QUAD_SUPPORT
-#define CONFIG_TI_EDMA3
#ifndef CONFIG_SPL_BUILD
#include <environment/ti/dfu.h>
#ifndef CONFIG_SPL_BUILD
/* CPSW Ethernet */
-#define CONFIG_MII
#define CONFIG_BOOTP_DEFAULT
-#define CONFIG_BOOTP_DNS
#define CONFIG_BOOTP_DNS2
#define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_SUBNETMASK
#define CONFIG_NET_RETRY_COUNT 10
#endif
-#define CONFIG_DRIVER_TI_CPSW
#define PHY_ANEG_TIMEOUT 8000 /* PHY needs longer aneg time at 1G */
#define CONFIG_SYS_RX_ETH_BUFFER 64
CONFIG_SYS_NAND_PAGE_SIZE)
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
/* NAND: driver related configs */
-#define CONFIG_NAND_OMAP_GPMC
-#define CONFIG_NAND_OMAP_ELM
#define CONFIG_SYS_NAND_ONFI_DETECTION
#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH16_CODE_HW
#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
}
#define CONFIG_SYS_NAND_ECCSIZE 512
#define CONFIG_SYS_NAND_ECCBYTES 26
-#define MTDIDS_DEFAULT "nand0=nand.0"
-#define MTDPARTS_DEFAULT "mtdparts=nand.0:" \
- "256k(NAND.SPL)," \
- "256k(NAND.SPL.backup1)," \
- "256k(NAND.SPL.backup2)," \
- "256k(NAND.SPL.backup3)," \
- "512k(NAND.u-boot-spl-os)," \
- "1m(NAND.u-boot)," \
- "256k(NAND.u-boot-env)," \
- "256k(NAND.u-boot-env.backup1)," \
- "7m(NAND.kernel)," \
- "-(NAND.file-system)"
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x00180000
/* NAND: SPL related configs */
-#ifdef CONFIG_SPL_NAND_SUPPORT
-#define CONFIG_SPL_NAND_AM33XX_BCH
-#endif
/* NAND: SPL falcon mode configs */
#ifdef CONFIG_SPL_OS_BOOT
#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00300000 /* kernel offset */
#endif
#define NANDARGS \
- "mtdids=" MTDIDS_DEFAULT "\0" \
- "mtdparts=" MTDPARTS_DEFAULT "\0" \
+ "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
+ "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
"nandargs=setenv bootargs console=${console} " \
"${optargs} " \
"root=${nandroot} " \
#define NANDBOOT
#endif /* CONFIG_NAND */
+#if defined(CONFIG_TI_SECURE_DEVICE)
+/* Avoid relocating onto firewalled area at end of DRAM */
+#define CONFIG_PRAM (64 * 1024)
+#endif /* CONFIG_TI_SECURE_DEVICE */
+
#endif /* __CONFIG_AM43XX_EVM_H */