#ifndef __CONFIG_AM43XX_EVM_H
#define __CONFIG_AM43XX_EVM_H
-#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 21) /* 2GB */
-#define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */
+#define CFG_MAX_RAM_BANK_SIZE (1024 << 21) /* 2GB */
+#define CFG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */
#include <asm/arch/omap.h>
/* NS16550 Configuration */
-#define CONFIG_SYS_NS16550_CLK 48000000
-#if !defined(CONFIG_SPL_DM) || !defined(CONFIG_DM_SERIAL)
-#define CONFIG_SYS_NS16550_REG_SIZE (-4)
-#define CONFIG_SYS_NS16550_SERIAL
-#endif
-
-/* I2C Configuration */
-
-/* Power */
-#define CONFIG_POWER_TPS65218
-#define CONFIG_POWER_TPS62362
-
-/* SPL defines. */
-#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \
- (128 << 20))
+#define CFG_SYS_NS16550_CLK 48000000
/* Enabling L2 Cache */
-#define CONFIG_SYS_L2_PL310
-#define CONFIG_SYS_PL310_BASE 0x48242000
+#define CFG_SYS_PL310_BASE 0x48242000
/*
* When building U-Boot such that there is no previous loader
#define V_SCLK (V_OSCK)
/* NS16550 Configuration */
-#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */
-
-/* SPL USB Support */
-
-#if defined(CONFIG_SPL_USB_HOST) || !defined(CONFIG_SPL_BUILD)
-#define CONFIG_SYS_USB_FAT_BOOT_PARTITION 1
-#endif
-
-#if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_USB_GADGET)
-#undef CONFIG_USB_DWC3_PHY_OMAP
-#undef CONFIG_USB_DWC3_OMAP
-#undef CONFIG_USB_DWC3
-#undef CONFIG_USB_DWC3_GADGET
-
-#undef CONFIG_USB_GADGET_DOWNLOAD
-#undef CONFIG_USB_GADGET_VBUS_DRAW
-#undef CONFIG_USB_GADGET_MANUFACTURER
-#undef CONFIG_USB_GADGET_VENDOR_NUM
-#undef CONFIG_USB_GADGET_PRODUCT_NUM
-#undef CONFIG_USB_GADGET_DUALSPEED
-#endif
-
-/*
- * Disable MMC DM for SPL build and can be re-enabled after adding
- * DM support in SPL
- */
-#ifdef CONFIG_SPL_BUILD
-#undef CONFIG_TIMER
-#endif
+#define CFG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */
#ifndef CONFIG_SPL_BUILD
/* USB Device Firmware Update support */
#ifndef CONFIG_SPL_BUILD
#include <environment/ti/dfu.h>
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
DEFAULT_LINUX_BOOT_ENV \
"fdtfile=undefined\0" \
"finduuid=part uuid mmc 0:2 uuid\0" \
#endif
-#ifndef CONFIG_SPL_BUILD
-/* CPSW Ethernet */
-#define CONFIG_NET_RETRY_COUNT 10
-#endif
-
#define PHY_ANEG_TIMEOUT 8000 /* PHY needs longer aneg time at 1G */
-#define CONFIG_SYS_RX_ETH_BUFFER 64
-
/* NAND support */
#ifdef CONFIG_MTD_RAW_NAND
/* NAND: device related configs */
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
/* NAND: driver related configs */
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH16_CODE_HW
-#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
+#define CFG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
10, 11, 12, 13, 14, 15, 16, 17, 18, 19, \
20, 21, 22, 23, 24, 25, 26, 27, 28, 29, \
30, 31, 32, 33, 34, 35, 36, 37, 38, 39, \
190, 191, 192, 193, 194, 195, 196, 197, 198, 199, \
200, 201, 202, 203, 204, 205, 206, 207, 208, 209, \
}
-#define CONFIG_SYS_NAND_ECCSIZE 512
-#define CONFIG_SYS_NAND_ECCBYTES 26
-#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x00180000
-/* NAND: SPL related configs */
-/* NAND: SPL falcon mode configs */
-#ifdef CONFIG_SPL_OS_BOOT
-#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00300000 /* kernel offset */
-#endif
+#define CFG_SYS_NAND_ECCSIZE 512
+#define CFG_SYS_NAND_ECCBYTES 26
#define NANDARGS \
- "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
- "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
"nandargs=setenv bootargs console=${console} " \
"${optargs} " \
"root=${nandroot} " \
"rootfstype=${nandrootfstype}\0" \
"nandroot=ubi0:rootfs rw ubi.mtd=NAND.file-system,4096\0" \
- "nandrootfstype=ubifs rootwait=1\0" \
+ "nandrootfstype=ubifs rootwait\0" \
"nandboot=echo Booting from nand ...; " \
"run nandargs; " \
"nand read ${fdtaddr} NAND.u-boot-spl-os; " \
#if defined(CONFIG_TI_SECURE_DEVICE)
/* Avoid relocating onto firewalled area at end of DRAM */
-#define CONFIG_PRAM (64 * 1024)
+#define CFG_PRAM (64 * 1024)
#endif /* CONFIG_TI_SECURE_DEVICE */
#endif /* __CONFIG_AM43XX_EVM_H */