Rename CONFIG_EHCI_IS_TDI to CONFIG_USB_EHCI_IS_TDI

[platform/kernel/u-boot.git] / include / configs / am43xx_evm.h

diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h
index 31a1c7e..7bea61e 100644 (file)
--- a/include/configs/am43xx_evm.h
+++ b/include/configs/am43xx_evm.h
@@ -21,15 +21,8 @@
 #endif
 
 /* I2C Configuration */
-#define CONFIG_ENV_EEPROM_IS_ON_I2C
-#define CONFIG_SYS_I2C_EEPROM_ADDR     0x50    /* Main EEPROM */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
 
 /* Power */
-#if !CONFIG_IS_ENABLED(DM_I2C)
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
-#endif
 #define CONFIG_POWER_TPS65218
 #define CONFIG_POWER_TPS62362
 
@@ -42,14 +35,6 @@
 #define CONFIG_SYS_PL310_BASE  0x48242000
 
 /*
- * Since SPL did pll and ddr initialization for us,
- * we don't need to do it twice.
- */
-#if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_QSPI_BOOT)
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#endif
-
-/*
  * When building U-Boot such that there is no previous loader
  * we need to call board_early_init_f.  This is taken care of in
  * s_init when we have SPL used.
@@ -69,12 +54,9 @@
 
 #if defined(CONFIG_SPL_USB_HOST) || !defined(CONFIG_SPL_BUILD)
 #define CONFIG_SYS_USB_FAT_BOOT_PARTITION              1
-#define CONFIG_USB_XHCI_OMAP
-
-#define CONFIG_AM437X_USB2PHY2_HOST
 #endif
 
-#if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_USB_ETHER)
+#if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_USB_GADGET)
 #undef CONFIG_USB_DWC3_PHY_OMAP
 #undef CONFIG_USB_DWC3_OMAP
 #undef CONFIG_USB_DWC3
@@ -175,16 +157,7 @@
 /* NAND support */
 #ifdef CONFIG_MTD_RAW_NAND
 /* NAND: device related configs */
-#define CONFIG_SYS_NAND_PAGE_SIZE      4096
-#define CONFIG_SYS_NAND_OOBSIZE                224
-#define CONFIG_SYS_NAND_BLOCK_SIZE     (256*1024)
-#define CONFIG_SYS_NAND_PAGE_COUNT     (CONFIG_SYS_NAND_BLOCK_SIZE / \
-                                        CONFIG_SYS_NAND_PAGE_SIZE)
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 /* NAND: driver related configs */
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-#define CONFIG_NAND_OMAP_ECCSCHEME     OMAP_ECC_BCH16_CODE_HW
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS  NAND_LARGE_BADBLOCK_POS
 #define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
                                10, 11, 12, 13, 14, 15, 16, 17, 18, 19, \
                                20, 21, 22, 23, 24, 25, 26, 27, 28, 29, \
@@ -209,7 +182,6 @@
                        }
 #define CONFIG_SYS_NAND_ECCSIZE                512
 #define CONFIG_SYS_NAND_ECCBYTES       26
-#define CONFIG_SYS_NAND_U_BOOT_OFFS    0x00180000
 /* NAND: SPL related configs */
 /* NAND: SPL falcon mode configs */
 #ifdef CONFIG_SPL_OS_BOOT