+/* SPDX-License-Identifier: GPL-2.0+ */
/*
* am43xx_evm.h
*
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- *
- * SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_AM43XX_EVM_H
#define __CONFIG_AM43XX_EVM_H
-#define CONFIG_ARCH_CPU_INIT
#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 21) /* 2GB */
#define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
/* Power */
+#if !CONFIG_IS_ENABLED(DM_I2C)
#define CONFIG_POWER
#define CONFIG_POWER_I2C
+#endif
#define CONFIG_POWER_TPS65218
#define CONFIG_POWER_TPS62362
/* SPL defines. */
-#define CONFIG_SPL_TEXT_BASE CONFIG_ISW_ENTRY_ADDR
#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \
(128 << 20))
/* Now bring in the rest of the common code. */
#include <configs/ti_armv7_omap.h>
-/* Always 64 KiB env size */
-#define CONFIG_ENV_SIZE (64 << 10)
-
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-
/* Clock Defines */
#define V_OSCK 24000000 /* Clock output from T2 */
#define V_SCLK (V_OSCK)
/* SPL USB Support */
-#if defined(CONFIG_SPL_USB_HOST_SUPPORT) || !defined(CONFIG_SPL_BUILD)
+#if defined(CONFIG_SPL_USB_HOST) || !defined(CONFIG_SPL_BUILD)
#define CONFIG_SYS_USB_FAT_BOOT_PARTITION 1
#define CONFIG_USB_XHCI_OMAP
-#define CONFIG_OMAP_USB_PHY
#define CONFIG_AM437X_USB2PHY2_HOST
#endif
-#if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_USBETH_SUPPORT)
+#if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_USB_ETHER)
#undef CONFIG_USB_DWC3_PHY_OMAP
#undef CONFIG_USB_DWC3_OMAP
#undef CONFIG_USB_DWC3
#define DFUARGS
#endif
-#ifdef CONFIG_QSPI_BOOT
-#ifndef CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_TEXT_BASE CONFIG_ISW_ENTRY_ADDR
-#endif
-#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
-#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
-#define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64 KB sectors */
-#define CONFIG_ENV_OFFSET 0x110000
-#define CONFIG_ENV_OFFSET_REDUND 0x120000
-#ifdef MTDIDS_DEFAULT
-#undef MTDIDS_DEFAULT
-#endif
-#ifdef MTDPARTS_DEFAULT
-#undef MTDPARTS_DEFAULT
-#endif
-#define MTDPARTS_DEFAULT "mtdparts=qspi.0:512k(QSPI.u-boot)," \
- "512k(QSPI.u-boot.backup)," \
- "512k(QSPI.u-boot-spl-os)," \
- "64k(QSPI.u-boot-env)," \
- "64k(QSPI.u-boot-env.backup)," \
- "8m(QSPI.kernel)," \
- "-(QSPI.file-system)"
-#endif
+#define BOOTENV_DEV_NAND(devtypeu, devtypel, instance) \
+ "bootcmd_" #devtypel "=" \
+ "run nandboot\0"
+
+#define BOOTENV_DEV_NAME_NAND(devtypeu, devtypel, instance) \
+ #devtypel #instance " "
-/* SPI */
-#define CONFIG_TI_SPI_MMAP
-#define CONFIG_QSPI_SEL_GPIO 48
-#define CONFIG_SF_DEFAULT_SPEED 48000000
-#define CONFIG_SF_DEFAULT_MODE SPI_MODE_3
-#define CONFIG_QSPI_QUAD_SUPPORT
-#define CONFIG_TI_EDMA3
+#define BOOT_TARGET_DEVICES(func) \
+ func(MMC, mmc, 0) \
+ func(USB, usb, 0) \
+ func(NAND, nand, 0) \
+ func(PXE, pxe, na) \
+ func(DHCP, dhcp, na)
+
+#include <config_distro_bootcmd.h>
#ifndef CONFIG_SPL_BUILD
#include <environment/ti/dfu.h>
-#include <environment/ti/mmc.h>
#define CONFIG_EXTRA_ENV_SETTINGS \
DEFAULT_LINUX_BOOT_ENV \
- DEFAULT_MMC_TI_ARGS \
- DEFAULT_FIT_TI_ARGS \
"fdtfile=undefined\0" \
- "bootpart=0:2\0" \
- "bootdir=/boot\0" \
- "bootfile=zImage\0" \
+ "finduuid=part uuid mmc 0:2 uuid\0" \
"console=ttyO0,115200n8\0" \
"partitions=" \
"uuid_disk=${uuid_gpt_disk};" \
"name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \
"optargs=\0" \
- "usbroot=/dev/sda2 rw\0" \
- "usbrootfstype=ext4 rootwait\0" \
- "usbdev=0\0" \
"ramroot=/dev/ram0 rw\0" \
"ramrootfstype=ext2\0" \
- "usbargs=setenv bootargs console=${console} " \
- "${optargs} " \
- "root=${usbroot} " \
- "rootfstype=${usbrootfstype}\0" \
"ramargs=setenv bootargs console=${console} " \
"${optargs} " \
"root=${ramroot} " \
"rootfstype=${ramrootfstype}\0" \
"loadramdisk=load ${devtype} ${devnum} ${rdaddr} ramdisk.gz\0" \
- "usbboot=" \
- "setenv devnum ${usbdev}; " \
- "setenv devtype usb; " \
- "usb start ${usbdev}; " \
- "if usb dev ${usbdev}; then " \
- "if run loadbootenv; then " \
- "echo Loaded environment from ${bootenv};" \
- "run importbootenv;" \
- "fi;" \
- "if test -n $uenvcmd; then " \
- "echo Running uenvcmd ...;" \
- "run uenvcmd;" \
- "fi;" \
- "if run loadimage; then " \
- "run loadfdt; " \
- "echo Booting from usb ${usbdev}...; " \
- "run usbargs;" \
- "bootz ${loadaddr} - ${fdtaddr}; " \
- "fi;" \
- "fi\0" \
- "fi;" \
- "usb stop ${usbdev};\0" \
"findfdt="\
"if test $board_name = AM43EPOS; then " \
"setenv fdtfile am43x-epos-evm.dtb; fi; " \
NANDARGS \
NETARGS \
DFUARGS \
-
-#define CONFIG_BOOTCOMMAND \
- "if test ${boot_fit} -eq 1; then " \
- "run update_to_fit;" \
- "fi;" \
- "run findfdt; " \
- "run envboot;" \
- "run mmcboot;" \
- "run usbboot;" \
- NANDBOOT \
+ BOOTENV
#endif
#ifndef CONFIG_SPL_BUILD
/* CPSW Ethernet */
-#define CONFIG_MII
-#define CONFIG_BOOTP_DEFAULT
-#define CONFIG_BOOTP_DNS
-#define CONFIG_BOOTP_DNS2
-#define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_SUBNETMASK
#define CONFIG_NET_RETRY_COUNT 10
#endif
-#define CONFIG_DRIVER_TI_CPSW
#define PHY_ANEG_TIMEOUT 8000 /* PHY needs longer aneg time at 1G */
#define CONFIG_SYS_RX_ETH_BUFFER 64
/* NAND support */
-#ifdef CONFIG_NAND
+#ifdef CONFIG_MTD_RAW_NAND
/* NAND: device related configs */
#define CONFIG_SYS_NAND_PAGE_SIZE 4096
#define CONFIG_SYS_NAND_OOBSIZE 224
}
#define CONFIG_SYS_NAND_ECCSIZE 512
#define CONFIG_SYS_NAND_ECCBYTES 26
-#define MTDIDS_DEFAULT "nand0=nand.0"
-#define MTDPARTS_DEFAULT "mtdparts=nand.0:" \
- "256k(NAND.SPL)," \
- "256k(NAND.SPL.backup1)," \
- "256k(NAND.SPL.backup2)," \
- "256k(NAND.SPL.backup3)," \
- "512k(NAND.u-boot-spl-os)," \
- "1m(NAND.u-boot)," \
- "256k(NAND.u-boot-env)," \
- "256k(NAND.u-boot-env.backup1)," \
- "7m(NAND.kernel)," \
- "-(NAND.file-system)"
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x00180000
/* NAND: SPL related configs */
/* NAND: SPL falcon mode configs */
#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00300000 /* kernel offset */
#endif
#define NANDARGS \
- "mtdids=" MTDIDS_DEFAULT "\0" \
- "mtdparts=" MTDPARTS_DEFAULT "\0" \
+ "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
+ "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
"nandargs=setenv bootargs console=${console} " \
"${optargs} " \
"root=${nandroot} " \
"nand read ${loadaddr} NAND.kernel; " \
"bootz ${loadaddr} - ${fdtaddr}\0"
#define NANDBOOT "run nandboot; "
-#else /* !CONFIG_NAND */
+#else /* !CONFIG_MTD_RAW_NAND */
#define NANDARGS
#define NANDBOOT
-#endif /* CONFIG_NAND */
+#endif /* CONFIG_MTD_RAW_NAND */
#if defined(CONFIG_TI_SECURE_DEVICE)
/* Avoid relocating onto firewalled area at end of DRAM */
projects / platform / kernel / u-boot.git / blobdiff