#ifndef __CONFIG_AM43XX_EVM_H
#define __CONFIG_AM43XX_EVM_H
-#define CONFIG_BOARD_LATE_INIT
#define CONFIG_ARCH_CPU_INIT
#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 21) /* 2GB */
#define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */
/* NS16550 Configuration */
#define CONFIG_SYS_NS16550_CLK 48000000
-#if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_DM_SERIAL)
+#if !defined(CONFIG_SPL_DM) || !defined(CONFIG_DM_SERIAL)
+#define CONFIG_SYS_NS16550_REG_SIZE (-4)
#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE (-4)
#endif
/* I2C Configuration */
-#define CONFIG_CMD_EEPROM
#define CONFIG_ENV_EEPROM_IS_ON_I2C
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
* we need to call board_early_init_f. This is taken care of in
* s_init when we have SPL used.
*/
-#if !defined(CONFIG_SKIP_LOWLEVEL_INIT) && !defined(CONFIG_SPL)
-#define CONFIG_BOARD_EARLY_INIT_F
-#endif
/* Now bring in the rest of the common code. */
#include <configs/ti_armv7_omap.h>
#define FAT_ENV_INTERFACE "mmc"
#define FAT_ENV_DEVICE_AND_PART "0:1"
#define FAT_ENV_FILE "uboot.env"
-#define CONFIG_FAT_WRITE
#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds"
* DM support in SPL
*/
#ifdef CONFIG_SPL_BUILD
-#undef CONFIG_DM_MMC
-#undef CONFIG_DM_SPI
-#undef CONFIG_DM_SPI_FLASH
#undef CONFIG_TIMER
#endif
#ifndef CONFIG_SPL_BUILD
/* USB Device Firmware Update support */
-
-#define DFU_ALT_INFO_MMC \
- "dfu_alt_info_mmc=" \
- "boot part 0 1;" \
- "rootfs part 0 2;" \
- "MLO fat 0 1;" \
- "spl-os-args fat 0 1;" \
- "spl-os-image fat 0 1;" \
- "u-boot.img fat 0 1;" \
- "uEnv.txt fat 0 1\0"
-
-#define DFU_ALT_INFO_EMMC \
- "dfu_alt_info_emmc=" \
- "MLO raw 0x100 0x100 mmcpart 0;" \
- "u-boot.img raw 0x300 0x1000 mmcpart 0\0"
-
-#define DFU_ALT_INFO_RAM \
- "dfu_alt_info_ram=" \
- "kernel ram 0x80200000 0x4000000;" \
- "fdt ram 0x80f80000 0x80000;" \
- "ramdisk ram 0x81000000 0x4000000\0"
-
-#define DFU_ALT_INFO_QSPI \
- "dfu_alt_info_qspi=" \
- "u-boot.bin raw 0x0 0x080000;" \
- "u-boot.backup raw 0x080000 0x080000;" \
- "u-boot-spl-os raw 0x100000 0x010000;" \
- "u-boot-env raw 0x110000 0x010000;" \
- "u-boot-env.backup raw 0x120000 0x010000;" \
- "kernel raw 0x130000 0x800000\0"
-
#define DFUARGS \
"dfu_bufsiz=0x10000\0" \
DFU_ALT_INFO_MMC \
DFU_ALT_INFO_EMMC \
DFU_ALT_INFO_RAM \
- DFU_ALT_INFO_QSPI
+ DFU_ALT_INFO_QSPI_XIP
#else
#define DFUARGS
#endif
#define CONFIG_QSPI_QUAD_SUPPORT
#define CONFIG_TI_EDMA3
-/* Enhance our eMMC support / experience. */
-#define CONFIG_CMD_GPT
-#define CONFIG_EFI_PARTITION
-
#ifndef CONFIG_SPL_BUILD
+#include <environment/ti/dfu.h>
+#include <environment/ti/mmc.h>
+
#define CONFIG_EXTRA_ENV_SETTINGS \
DEFAULT_LINUX_BOOT_ENV \
DEFAULT_MMC_TI_ARGS \
+ DEFAULT_FIT_TI_ARGS \
"fdtfile=undefined\0" \
"bootpart=0:2\0" \
"bootdir=/boot\0" \
"root=${ramroot} " \
"rootfstype=${ramrootfstype}\0" \
"loadramdisk=load ${devtype} ${devnum} ${rdaddr} ramdisk.gz\0" \
- "loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
- "loadfdt=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
- "mmcboot=mmc dev ${mmcdev}; " \
- "setenv devnum ${mmcdev}; " \
- "setenv devtype mmc; " \
- "if mmc rescan; then " \
- "echo SD/MMC found on device ${devnum};" \
- "if run loadimage; then " \
- "run loadfdt; " \
- "echo Booting from mmc${mmcdev} ...; " \
- "run args_mmc; " \
- "bootz ${loadaddr} - ${fdtaddr}; " \
- "fi;" \
- "fi;\0" \
"usbboot=" \
"setenv devnum ${usbdev}; " \
"setenv devtype usb; " \
DFUARGS \
#define CONFIG_BOOTCOMMAND \
+ "if test ${boot_fit} -eq 1; then " \
+ "run update_to_fit;" \
+ "fi;" \
"run findfdt; " \
"run envboot;" \
"run mmcboot;" \