ARM: OMAP: Remove STACKSIZE for IRQ and FIQ if unused

[platform/kernel/u-boot.git] / include / configs / am3517_evm.h

diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
index 513d005..dfe186c 100644 (file)
--- a/include/configs/am3517_evm.h
+++ b/include/configs/am3517_evm.h
@@ -28,7 +28,6 @@
 /*
  * High Level Configuration Options
  */
-#define CONFIG_ARMCORTEXA8     1       /* This is an ARM V7 CPU core */
 #define CONFIG_OMAP            1       /* in a TI OMAP core */
 #define CONFIG_OMAP34XX                1       /* which is a 34XX */
 #define CONFIG_OMAP3_AM3517EVM 1       /* working with AM3517EVM */
@@ -61,8 +60,6 @@
  */
 #define CONFIG_ENV_SIZE                        (128 << 10)     /* 128 KiB sector */
 #define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + (128 << 10))
-#define CONFIG_SYS_GBL_DATA_SIZE       128     /* bytes reserved for */
-                                               /* initial data */
 /*
  * DDR related
  */
@@ -96,9 +93,48 @@
 #define CONFIG_SYS_BAUDRATE_TABLE      {4800, 9600, 19200, 38400, 57600,\
                                        115200}
 #define CONFIG_MMC                     1
-#define CONFIG_OMAP3_MMC               1
+#define CONFIG_GENERIC_MMC             1
+#define CONFIG_OMAP_HSMMC              1
 #define CONFIG_DOS_PARTITION           1
 
+/*
+ * USB configuration
+ * Enable CONFIG_MUSB_HCD for Host functionalities MSC, keyboard
+ * Enable CONFIG_MUSB_UDC for Device functionalities.
+ */
+#define CONFIG_USB_AM35X               1
+#define CONFIG_MUSB_HCD                        1
+
+#ifdef CONFIG_USB_AM35X
+
+#ifdef CONFIG_MUSB_HCD
+#define CONFIG_CMD_USB
+
+#define CONFIG_USB_STORAGE
+#define CONGIG_CMD_STORAGE
+#define CONFIG_CMD_FAT
+
+#ifdef CONFIG_USB_KEYBOARD
+#define CONFIG_SYS_USB_EVENT_POLL
+#define CONFIG_PREBOOT "usb start"
+#endif /* CONFIG_USB_KEYBOARD */
+
+#endif /* CONFIG_MUSB_HCD */
+
+#ifdef CONFIG_MUSB_UDC
+/* USB device configuration */
+#define CONFIG_USB_DEVICE              1
+#define CONFIG_USB_TTY                 1
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV   1
+/* Change these to suit your needs */
+#define CONFIG_USBD_VENDORID           0x0451
+#define CONFIG_USBD_PRODUCTID          0x5678
+#define CONFIG_USBD_MANUFACTURER       "Texas Instruments"
+#define CONFIG_USBD_PRODUCT_NAME       "AM3517EVM"
+#endif /* CONFIG_MUSB_UDC */
+
+#endif /* CONFIG_USB_AM35X */
+
 /* commands to include */
 #include <config_cmd_default.h>
 
@@ -126,6 +162,7 @@
 #define CONFIG_DRIVER_OMAP34XX_I2C     1
 
 #undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
 /*
  * Board NAND Info.
  */
@@ -149,21 +186,22 @@
 /* Environment information */
 #define CONFIG_BOOTDELAY       10
 
-#define CONFIG_BOOTFILE                uImage
+#define CONFIG_BOOTFILE                "uImage"
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "loadaddr=0x82000000\0" \
-       "console=ttyS2,115200n8\0" \
+       "console=ttyO2,115200n8\0" \
+       "mmcdev=0\0" \
        "mmcargs=setenv bootargs console=${console} " \
                "root=/dev/mmcblk0p2 rw " \
                "rootfstype=ext3 rootwait\0" \
        "nandargs=setenv bootargs console=${console} " \
                "root=/dev/mtdblock4 rw " \
                "rootfstype=jffs2\0" \
-       "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \
+       "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
        "bootscript=echo Running bootscript from mmc ...; " \
                "source ${loadaddr}\0" \
-       "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \
+       "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
        "mmcboot=echo Booting from mmc ...; " \
                "run mmcargs; " \
                "bootm ${loadaddr}\0" \
@@ -173,7 +211,7 @@
                "bootm ${loadaddr}\0" \
 
 #define CONFIG_BOOTCOMMAND \
-       "if mmc init; then " \
+       "if mmc rescan ${mmcdev}; then " \
                "if run loadbootscript; then " \
                        "run bootscript; " \
                "else " \
@@ -225,10 +263,6 @@
  * The stack sizes are set up in start.S using the settings below
  */
 #define CONFIG_STACKSIZE       (128 << 10)     /* regular stack 128 KiB */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ   (4 << 10)       /* IRQ stack 4 KiB */
-#define CONFIG_STACKSIZE_FIQ   (4 << 10)       /* FIQ stack 4 KiB */
-#endif
 
 /*-----------------------------------------------------------------------
  * Physical Memory Map
@@ -238,9 +272,6 @@
 #define PHYS_SDRAM_1_SIZE      (32 << 20)      /* at least 32 MiB */
 #define PHYS_SDRAM_2           OMAP34XX_SDRC_CS1
 
-/* SDRAM Bank Allocation method */
-#define SDRC_R_B_C             1
-
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
@@ -256,7 +287,9 @@
 #define CONFIG_SYS_MAX_FLASH_BANKS     2       /* max number of flash banks */
 #define CONFIG_SYS_MONITOR_LEN         (256 << 10)     /* Reserve 2 sectors */
 
-#define CONFIG_SYS_FLASH_BASE          boot_flash_base
+#if defined(CONFIG_CMD_NAND)
+#define CONFIG_SYS_FLASH_BASE          PISMO1_NAND_BASE
+#endif
 
 /* Monitor at start of flash */
 #define CONFIG_SYS_MONITOR_BASE                CONFIG_SYS_FLASH_BASE
@@ -266,9 +299,9 @@
 #define CONFIG_ENV_IS_IN_NAND          1
 #define SMNAND_ENV_OFFSET              0x260000 /* environment starts here */
 
-#define CONFIG_SYS_ENV_SECT_SIZE       boot_flash_sec
-#define CONFIG_ENV_OFFSET              boot_flash_off
-#define CONFIG_ENV_ADDR                        boot_flash_env_addr
+#define CONFIG_SYS_ENV_SECT_SIZE       (128 << 10)     /* 128 KiB */
+#define CONFIG_ENV_OFFSET              SMNAND_ENV_OFFSET
+#define CONFIG_ENV_ADDR                        SMNAND_ENV_OFFSET
 
 /*-----------------------------------------------------------------------
  * CFI FLASH driver setup
@@ -285,12 +318,10 @@
 #define CONFIG_SYS_JFFS2_FIRST_BANK    CONFIG_SYS_MAX_FLASH_BANKS
 #define CONFIG_SYS_JFFS2_NUM_BANKS     1
 
-#ifndef __ASSEMBLY__
-extern unsigned int boot_flash_base;
-extern volatile unsigned int boot_flash_env_addr;
-extern unsigned int boot_flash_off;
-extern unsigned int boot_flash_sec;
-extern unsigned int boot_flash_type;
-#endif
-
+#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_ADDR       0x4020f800
+#define CONFIG_SYS_INIT_RAM_SIZE       0x800
+#define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_SYS_INIT_RAM_ADDR + \
+                                        CONFIG_SYS_INIT_RAM_SIZE - \
+                                        GENERATED_GBL_DATA_SIZE)
 #endif /* __CONFIG_H */