imx: wandboard: convert FEC support to DM_ETH

[platform/kernel/u-boot.git] / include / configs / am3517_evm.h

diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
index 1fe81d8..3e5f0b1 100644 (file)
--- a/include/configs/am3517_evm.h
+++ b/include/configs/am3517_evm.h
@@ -12,18 +12,7 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-/*
- * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
- * 64 bytes before this address should be set aside for u-boot.img's
- * header. That is 0x800FFFC0--0x80100000 should not be used for any
- * other needs.
- */
-
-#define CONFIG_SYS_SPL_MALLOC_START    0x80208000
-#define CONFIG_SYS_SPL_MALLOC_SIZE     0x100000
-
 #include <configs/ti_omap3_common.h>
-#undef CONFIG_SDRC     /* Disable SDRC since we have EMIF4 */
 
 #define CONFIG_REVISION_TAG
 
@@ -37,18 +26,11 @@
  * Enable CONFIG_USB_MUSB_HOST for Host functionalities MSC, keyboard
  * Enable CONFIG_USB_MUSB_GADGET for Device functionalities.
  */
-
-#ifdef CONFIG_USB_MUSB_AM35X
-
-#ifdef CONFIG_USB_MUSB_HOST
-
-#ifdef CONFIG_USB_KEYBOARD
-#define CONFIG_PREBOOT "usb start"
-#endif /* CONFIG_USB_KEYBOARD */
-
-#endif /* CONFIG_USB_MUSB_HOST */
-
-#endif /* CONFIG_USB_MUSB_AM35X */
+#ifdef CONFIG_SPL_BUILD
+#undef CONFIG_USB_EHCI_OMAP
+#else
+#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO       57
+#endif
 
 /* I2C */
 
@@ -81,6 +63,7 @@
 #define CONFIG_SYS_NAND_MAX_ECCPOS     56
 #define CONFIG_SYS_NAND_U_BOOT_START   CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_NAND_U_BOOT_OFFS    0x80000
+#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x2a0000
 /* NAND block size is 128 KiB.  Synchronize these values with
  * corresponding Device Tree entries in Linux:
  *  MLO(SPL)             4 * NAND_BLOCK_SIZE = 512 KiB  @ 0x000000
@@ -98,7 +81,7 @@
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "loadaddr=0x82000000\0" \
-       "console=ttyO2,115200n8\0" \
+       "console=ttyS2,115200n8\0" \
        "fdtfile=am3517-evm.dtb\0" \
        "fdtaddr=0x82C00000\0" \
        "vram=16M\0" \
@@ -176,8 +159,6 @@
 
 /* Physical Memory Map */
 #define CONFIG_SYS_CS0_SIZE            (256 * 1024 * 1024)
-#define CONFIG_SYS_INIT_RAM_ADDR       0x4020f800
-#define CONFIG_SYS_INIT_RAM_SIZE       0x800
 
 /* FLASH and environment organization */
 
@@ -195,17 +176,9 @@
 #define CONFIG_SYS_MONITOR_BASE                CONFIG_SYS_FLASH_BASE
 
 #define CONFIG_SYS_ENV_SECT_SIZE       (128 << 10)     /* 128 KiB */
-#define CONFIG_ENV_SIZE                        CONFIG_SYS_ENV_SECT_SIZE
-#define CONFIG_ENV_OFFSET              0x260000
 #define CONFIG_ENV_ADDR                        0x260000
 
 /* Defines for SPL */
-#undef CONFIG_SPL_TEXT_BASE
-#define CONFIG_SPL_TEXT_BASE           0x40200000
-
-#undef CONFIG_SPL_BSS_START_ADDR
-#define CONFIG_SPL_BSS_START_ADDR      0x80000000
-#define CONFIG_SPL_BSS_MAX_SIZE                0x80000         /* 512 KB */
 
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME                "u-boot.img"