ARM: Move SYS_CACHELINE_SIZE over to Kconfig

[platform/kernel/u-boot.git] / include / configs / am3517_crane.h

diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h
index 9b31b9c..30c4278 100644 (file)
--- a/include/configs/am3517_crane.h
+++ b/include/configs/am3517_crane.h
@@ -66,7 +66,6 @@
  */
 #define V_NS16550_CLK                  48000000        /* 48MHz (APLL96/2) */
 
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    (-4)
 #define CONFIG_SYS_NS16550_CLK         V_NS16550_CLK
@@ -90,29 +89,27 @@
 
 /*
  * USB configuration
- * Enable CONFIG_MUSB_HCD for Host functionalities MSC, keyboard
- * Enable CONFIG_MUSB_UDC for Device functionalities.
+ * Enable CONFIG_USB_MUSB_HCD for Host functionalities MSC, keyboard
+ * Enable CONFIG_USB_MUSB_UDC for Device functionalities.
  */
 #define CONFIG_USB_AM35X               1
-#define CONFIG_MUSB_HCD                        1
+#define CONFIG_USB_MUSB_HCD                    1
 
 #ifdef CONFIG_USB_AM35X
 
-#ifdef CONFIG_MUSB_HCD
-#define CONFIG_CMD_USB
+#ifdef CONFIG_USB_MUSB_HCD
 
 #define CONFIG_USB_STORAGE
 #define CONGIG_CMD_STORAGE
-#define CONFIG_CMD_FAT
 
 #ifdef CONFIG_USB_KEYBOARD
 #define CONFIG_SYS_USB_EVENT_POLL
 #define CONFIG_PREBOOT "usb start"
 #endif /* CONFIG_USB_KEYBOARD */
 
-#endif /* CONFIG_MUSB_HCD */
+#endif /* CONFIG_USB_MUSB_HCD */
 
-#ifdef CONFIG_MUSB_UDC
+#ifdef CONFIG_USB_MUSB_UDC
 /* USB device configuration */
 #define CONFIG_USB_DEVICE              1
 #define CONFIG_USB_TTY                 1
@@ -122,27 +119,14 @@
 #define CONFIG_USBD_PRODUCTID          0x5678
 #define CONFIG_USBD_MANUFACTURER       "Texas Instruments"
 #define CONFIG_USBD_PRODUCT_NAME       "AM3517CRANE"
-#endif /* CONFIG_MUSB_UDC */
+#endif /* CONFIG_USB_MUSB_UDC */
 
 #endif /* CONFIG_USB_AM35X */
 
 /* commands to include */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_EXT2                /* EXT2 Support                 */
-#define CONFIG_CMD_FAT         /* FAT support                  */
 #define CONFIG_CMD_JFFS2       /* JFFS2 Support                */
 
-#define CONFIG_CMD_I2C         /* I2C serial bus support       */
-#define CONFIG_CMD_MMC         /* MMC support                  */
 #define CONFIG_CMD_NAND                /* NAND support                 */
-#define CONFIG_CMD_DHCP
-#undef CONFIG_CMD_PING
-
-#undef CONFIG_CMD_FLASH                /* flinfo, erase, protect       */
-#undef CONFIG_CMD_FPGA         /* FPGA configuration Support   */
-#undef CONFIG_CMD_IMI          /* iminfo                       */
-#undef CONFIG_CMD_IMLS         /* List all found images        */
 
 #define CONFIG_SYS_NO_FLASH
 #define CONFIG_SYS_I2C
@@ -150,7 +134,6 @@
 #define CONFIG_SYS_OMAP24_I2C_SLAVE    1
 #define CONFIG_SYS_I2C_OMAP34XX
 
-#undef CONFIG_CMD_NFS
 /*
  * Board NAND Info.
  */
@@ -171,7 +154,6 @@
 #define CONFIG_JFFS2_PART_SIZE         0xf980000       /* sz of jffs2 part */
 
 /* Environment information */
-#define CONFIG_BOOTDELAY       10
 
 #define CONFIG_BOOTFILE                "uImage"
 
@@ -213,11 +195,7 @@
 /*
  * Miscellaneous configurable options
  */
-#define V_PROMPT                       "AM3517_CRANE # "
-
 #define CONFIG_SYS_LONGHELP            /* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER         /* use "hush" command parser */
-#define CONFIG_SYS_PROMPT              V_PROMPT
 #define CONFIG_SYS_CBSIZE              512     /* Console I/O Buffer Size */
 /* Print Buffer Size */
 #define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
@@ -324,7 +302,7 @@
 #define CONFIG_SPL_LDSCRIPT            "$(CPUDIR)/omap-common/u-boot-spl.lds"
 
 /* NAND boot config */
-#define CONFIG_SYS_NAND_BUSWIDTH_16BIT 16
+#define CONFIG_SYS_NAND_BUSWIDTH_16BIT
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_PAGE_COUNT     64
 #define CONFIG_SYS_NAND_PAGE_SIZE      2048