/* settings we don;t want on this board */
-#ifndef CONFIG_SPL_BUILD
-# define CONFIG_TIMESTAMP
-#endif
-
-#define CONFIG_SYS_BOOTM_LEN (16 << 20)
-
/* Clock Defines */
#define V_OSCK 24000000 /* Clock output from T2 */
#define V_SCLK (V_OSCK)
-#define CONFIG_HSMMC2_8BIT
-
-#ifndef CONFIG_SHC_ICT
-/*
- * In builds other than ICT, reset to retry after timeout
- * Define a timeout after which a stopped bootloader continues autoboot
- * (only works with CONFIG_RESET_TO_RETRY)
- */
-# define CONFIG_BOOT_RETRY_TIME 30
-# define CONFIG_RESET_TO_RETRY
-#endif
-
#ifndef CONFIG_SPL_BUILD
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"loadaddr=0x80200000\0" \
"kloadaddr=0x84000000\0" \
"fdtaddr=0x85000000\0" \
#if defined CONFIG_SHC_NETBOOT
/* Network Boot */
-# define CONFIG_BOOTCOMMAND \
- "run fusecmd; " \
- "if run netboot; then " \
- "echo Booting from network; " \
- "else " \
- "echo ERROR: Cannot boot from network!; " \
- "panic; " \
- "fi; "
#elif defined CONFIG_SHC_SDBOOT /* !defined CONFIG_SHC_NETBOOT */
/* SD-Card Boot */
-# define CONFIG_BOOTCOMMAND \
- "if mmc dev 0; mmc rescan; then " \
- "run sd_setup; " \
- "else " \
- "echo ERROR: SD/MMC-Card not detected!; " \
- "panic; " \
- "fi; " \
- "if run loaduimage; then " \
- "echo Bootable SD/MMC-Card inserted, booting from it!; " \
- "run mmcboot; " \
- "else " \
- "echo ERROR: Unable to load uImage from SD/MMC-Card!; " \
- "panic; " \
- "fi; "
#elif defined CONFIG_SHC_ICT
/* ICT adapter boots only u-boot and does HW partitioning */
-# define CONFIG_BOOTCOMMAND \
- "if mmc dev 0; mmc rescan; then " \
- "run sd_setup; " \
- "else " \
- "echo ERROR: SD/MMC-Card not detected!; " \
- "panic; " \
- "fi; " \
- "run fusecmd; "
#else /* !defined CONFIG_SHC_NETBOOT, !defined CONFIG_SHC_SDBOOT */
/* Regular Boot from internal eMMC */
-# define CONFIG_BOOTCOMMAND \
- "if mmc dev 1; mmc rescan; then " \
- "run emmc_setup; " \
- "else " \
- "echo ERROR: eMMC device not detected!; " \
- "panic; " \
- "fi; " \
- "if run loaduimage; then " \
- "run mmcboot; " \
- "else " \
- "echo ERROR Unable to load uImage from eMMC!; " \
- "echo Performing Rollback!; " \
- "setenv _active_ ${active_root}; " \
- "setenv _inactive_ ${inactive_root}; " \
- "setenv active_root ${_inactive_}; " \
- "setenv inactive_root ${_active_}; " \
- "saveenv; " \
- "reset; " \
- "fi; "
#endif /* Regular Boot */
/* NS16550 Configuration */
-#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* UART0 */
-#define CONFIG_SYS_NS16550_COM2 0x48022000 /* UART1 */
-#define CONFIG_SYS_NS16550_COM3 0x48024000 /* UART2 */
-#define CONFIG_SYS_NS16550_COM4 0x481a6000 /* UART3 */
-#define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */
-#define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */
-
-/* PMIC support */
-#define CONFIG_POWER_TPS65217
-
-/* SPL */
-
-/*
- * Disable MMC DM for SPL build and can be re-enabled after adding
- * DM support in SPL
- */
-#ifdef CONFIG_SPL_BUILD
-#undef CONFIG_DM_MMC
-#undef CONFIG_TIMER
-#endif
-
-#define CONFIG_NET_RETRY_COUNT 10
+#define CFG_SYS_NS16550_COM1 0x44e09000 /* UART0 */
+#define CFG_SYS_NS16550_COM2 0x48022000 /* UART1 */
+#define CFG_SYS_NS16550_COM3 0x48024000 /* UART2 */
+#define CFG_SYS_NS16550_COM4 0x481a6000 /* UART3 */
+#define CFG_SYS_NS16550_COM5 0x481a8000 /* UART4 */
+#define CFG_SYS_NS16550_COM6 0x481aa000 /* UART5 */
-/* I2C configuration */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
-#define CONFIG_SYS_I2C_SPEED 400000
-#define CONFIG_SYS_I2C_SLAVE 1
#endif /* ! __CONFIG_AM335X_SHC_H */