Merge tag 'u-boot-amlogic-20230417' of https://source.denx.de/u-boot/custodians/u...
[platform/kernel/u-boot.git] / include / configs / am335x_shc.h
index 584b025..ee6f622 100644 (file)
 
 /* settings we don;t want on this board */
 
-#ifndef CONFIG_SPL_BUILD
-# define CONFIG_TIMESTAMP
-#endif
-
-#define CONFIG_SYS_BOOTM_LEN           (16 << 20)
-
 /* Clock Defines */
 #define V_OSCK                         24000000  /* Clock output from T2 */
 #define V_SCLK                         (V_OSCK)
 
-#define CONFIG_HSMMC2_8BIT
-
-#ifndef CONFIG_SHC_ICT
-/*
- * In builds other than ICT, reset to retry after timeout
- * Define a timeout after which a stopped bootloader continues autoboot
- * (only works with CONFIG_RESET_TO_RETRY)
- */
-# define CONFIG_BOOT_RETRY_TIME 30
-# define CONFIG_RESET_TO_RETRY
-#endif
-
 #ifndef CONFIG_SPL_BUILD
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
        "loadaddr=0x80200000\0" \
        "kloadaddr=0x84000000\0" \
        "fdtaddr=0x85000000\0" \
 
 #if defined CONFIG_SHC_NETBOOT
 /* Network Boot */
-# define CONFIG_BOOTCOMMAND \
-       "run fusecmd; " \
-       "if run netboot; then " \
-               "echo Booting from network; " \
-       "else " \
-               "echo ERROR: Cannot boot from network!; " \
-               "panic; " \
-       "fi; "
 
 #elif defined CONFIG_SHC_SDBOOT /* !defined CONFIG_SHC_NETBOOT */
 /* SD-Card Boot */
-# define CONFIG_BOOTCOMMAND \
-       "if mmc dev 0; mmc rescan; then " \
-               "run sd_setup; " \
-       "else " \
-               "echo ERROR: SD/MMC-Card not detected!; " \
-               "panic; " \
-       "fi; " \
-       "if run loaduimage; then " \
-               "echo Bootable SD/MMC-Card inserted, booting from it!; " \
-               "run mmcboot; " \
-       "else " \
-               "echo ERROR: Unable to load uImage from SD/MMC-Card!; " \
-               "panic; " \
-       "fi; "
 
 #elif defined CONFIG_SHC_ICT
 /* ICT adapter boots only u-boot and does HW partitioning */
-# define CONFIG_BOOTCOMMAND \
-       "if mmc dev 0; mmc rescan; then " \
-               "run sd_setup; " \
-       "else " \
-               "echo ERROR: SD/MMC-Card not detected!; " \
-               "panic; " \
-       "fi; " \
-       "run fusecmd; "
 
 #else /* !defined CONFIG_SHC_NETBOOT, !defined CONFIG_SHC_SDBOOT */
 /* Regular Boot from internal eMMC */
-# define CONFIG_BOOTCOMMAND \
-       "if mmc dev 1; mmc rescan; then " \
-               "run emmc_setup; " \
-       "else " \
-               "echo ERROR: eMMC device not detected!; " \
-               "panic; " \
-       "fi; " \
-       "if run loaduimage; then " \
-               "run mmcboot; " \
-       "else " \
-               "echo ERROR Unable to load uImage from eMMC!; " \
-               "echo Performing Rollback!; " \
-               "setenv _active_ ${active_root}; " \
-               "setenv _inactive_ ${inactive_root}; " \
-               "setenv active_root ${_inactive_}; " \
-               "setenv inactive_root ${_active_}; " \
-               "saveenv; " \
-               "reset; " \
-       "fi; "
 
 #endif /* Regular Boot */
 
 /* NS16550 Configuration */
-#define CONFIG_SYS_NS16550_COM1                0x44e09000      /* UART0 */
-#define CONFIG_SYS_NS16550_COM2                0x48022000      /* UART1 */
-#define CONFIG_SYS_NS16550_COM3                0x48024000      /* UART2 */
-#define CONFIG_SYS_NS16550_COM4                0x481a6000      /* UART3 */
-#define CONFIG_SYS_NS16550_COM5                0x481a8000      /* UART4 */
-#define CONFIG_SYS_NS16550_COM6                0x481aa000      /* UART5 */
-
-/* PMIC support */
-#define CONFIG_POWER_TPS65217
-
-/* SPL */
-
-/*
- * Disable MMC DM for SPL build and can be re-enabled after adding
- * DM support in SPL
- */
-#ifdef CONFIG_SPL_BUILD
-#undef CONFIG_DM_MMC
-#undef CONFIG_TIMER
-#endif
+#define CFG_SYS_NS16550_COM1           0x44e09000      /* UART0 */
+#define CFG_SYS_NS16550_COM2           0x48022000      /* UART1 */
+#define CFG_SYS_NS16550_COM3           0x48024000      /* UART2 */
+#define CFG_SYS_NS16550_COM4           0x481a6000      /* UART3 */
+#define CFG_SYS_NS16550_COM5           0x481a8000      /* UART4 */
+#define CFG_SYS_NS16550_COM6           0x481aa000      /* UART5 */
 
-#define CONFIG_NET_RETRY_COUNT         10
 #endif /* ! __CONFIG_AM335X_SHC_H */