Convert CONFIG_SYS_I2C_SPEED et al to Kconfig

[platform/kernel/u-boot.git] / include / configs / am335x_shc.h

diff --git a/include/configs/am335x_shc.h b/include/configs/am335x_shc.h
index 77ac3fe..584b025 100644 (file)
--- a/include/configs/am335x_shc.h
+++ b/include/configs/am335x_shc.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2016
  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
@@ -6,8 +7,6 @@
  * am335x_evm.h
  *
  * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_AM335X_SHC_H
@@ -16,13 +15,6 @@
 #include <configs/ti_am335x_common.h>
 
 /* settings we don;t want on this board */
-#undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
-#undef CONFIG_CMD_EXT4
-#undef CONFIG_CMD_EXT4_WRITE
-#undef CONFIG_CMD_MMC_SPI
-#undef CONFIG_CMD_SPI
-
-#define CONFIG_CMD_CACHE
 
 #ifndef CONFIG_SPL_BUILD
 # define CONFIG_TIMESTAMP
@@ -34,32 +26,8 @@
 #define V_OSCK                         24000000  /* Clock output from T2 */
 #define V_SCLK                         (V_OSCK)
 
-#define CONFIG_ENV_IS_IN_MMC           1
-
-/*
- * in case of SD Card or Network boot we want to have a possibility to
- * debrick the shc, therefore do not read environment from eMMC
- */
-#if defined(CONFIG_SHC_SDBOOT) || defined(CONFIG_SHC_NETBOOT)
-#define CONFIG_SYS_MMC_ENV_DEV         0
-#else
-#define CONFIG_SYS_MMC_ENV_DEV         1
-#endif
-
-/*
- * Info when using boot partitions: As environment resides within first
- * 128 kB, MLO must start at 128 kB == 0x20000
- * ENV at MMC Boot0 Partition - 0/Undefined=user, 1=boot0, 2=boot1,
- * 4..7=general0..3
- */
-#define CONFIG_ENV_SIZE                                0x1000 /* 4 KB */
-#define CONFIG_ENV_OFFSET                      0x7000 /* 28 kB */
-
 #define CONFIG_HSMMC2_8BIT
 
-#define CONFIG_ENV_OFFSET_REDUND    0x9000 /* 36 kB */
-#define CONFIG_ENV_SIZE_REDUND      CONFIG_ENV_SIZE
-
 #ifndef CONFIG_SHC_ICT
 /*
  * In builds other than ICT, reset to retry after timeout
@@ -70,9 +38,6 @@
 # define CONFIG_RESET_TO_RETRY
 #endif
 
-#define CONFIG_ENV_VARS_UBOOT_CONFIG
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-
 #ifndef CONFIG_SPL_BUILD
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "loadaddr=0x80200000\0" \
@@ -242,58 +207,20 @@
 #define CONFIG_SYS_NS16550_COM4                0x481a6000      /* UART3 */
 #define CONFIG_SYS_NS16550_COM5                0x481a8000      /* UART4 */
 #define CONFIG_SYS_NS16550_COM6                0x481aa000      /* UART5 */
-#define CONFIG_CONS_INDEX               1
 
 /* PMIC support */
 #define CONFIG_POWER_TPS65217
 
 /* SPL */
 
-#define CONFIG_SPL_LDSCRIPT            "arch/arm/mach-omap2/u-boot-spl.lds"
-
-#ifndef CONFIG_SPL_USBETH_SUPPORT
-#define CONFIG_FASTBOOT_FLASH_MMC_DEV   1
-#endif
-
 /*
  * Disable MMC DM for SPL build and can be re-enabled after adding
  * DM support in SPL
  */
 #ifdef CONFIG_SPL_BUILD
 #undef CONFIG_DM_MMC
-#undef CONFIG_DM_MMC_OPS
 #undef CONFIG_TIMER
 #endif
 
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_PING
-#define CONFIG_DRIVER_TI_CPSW
-#define CONFIG_MII
-#define CONFIG_BOOTP_DEFAULT
-#define CONFIG_BOOTP_DNS
-#define CONFIG_BOOTP_DNS2
-#define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_SUBNETMASK
 #define CONFIG_NET_RETRY_COUNT         10
-#define CONFIG_NET_MULTI
-#define CONFIG_PHY_GIGE
-#define CONFIG_PHYLIB
-#define CONFIG_PHY_ADDR                        0
-#define CONFIG_PHY_SMSC
-
-/* I2C configuration */
-#define CONFIG_SYS_I2C_EEPROM_ADDR     0x50    /* Main EEPROM */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
-#define CONFIG_SYS_I2C_SPEED           400000
-#define CONFIG_SYS_I2C_SLAVE           1
-
-#define CONFIG_SHOW_BOOT_PROGRESS
-
-#if defined CONFIG_SHC_NETBOOT
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_ENV_IS_NOWHERE
-#undef CONFIG_ENV_IS_IN_MMC
-#endif
-#endif
 #endif /* ! __CONFIG_AM335X_SHC_H */