+/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2016
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
* am335x_evm.h
*
* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- *
- * SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_AM335X_SHC_H
#include <configs/ti_am335x_common.h>
/* settings we don;t want on this board */
-#undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
-#undef CONFIG_CMD_SPI
-
-#define CONFIG_CMD_CACHE
#ifndef CONFIG_SPL_BUILD
# define CONFIG_TIMESTAMP
#define V_OSCK 24000000 /* Clock output from T2 */
#define V_SCLK (V_OSCK)
-/*
- * in case of SD Card or Network boot we want to have a possibility to
- * debrick the shc, therefore do not read environment from eMMC
- */
-#if defined(CONFIG_SHC_SDBOOT) || defined(CONFIG_SHC_NETBOOT)
-#define CONFIG_SYS_MMC_ENV_DEV 0
-#else
-#define CONFIG_SYS_MMC_ENV_DEV 1
-#endif
-
-/*
- * Info when using boot partitions: As environment resides within first
- * 128 kB, MLO must start at 128 kB == 0x20000
- * ENV at MMC Boot0 Partition - 0/Undefined=user, 1=boot0, 2=boot1,
- * 4..7=general0..3
- */
-#define CONFIG_ENV_SIZE 0x1000 /* 4 KB */
-#define CONFIG_ENV_OFFSET 0x7000 /* 28 kB */
-
#define CONFIG_HSMMC2_8BIT
-#define CONFIG_ENV_OFFSET_REDUND 0x9000 /* 36 kB */
-#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
-
#ifndef CONFIG_SHC_ICT
/*
* In builds other than ICT, reset to retry after timeout
# define CONFIG_RESET_TO_RETRY
#endif
-#define CONFIG_ENV_VARS_UBOOT_CONFIG
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-
#ifndef CONFIG_SPL_BUILD
#define CONFIG_EXTRA_ENV_SETTINGS \
"loadaddr=0x80200000\0" \
#define CONFIG_SYS_NS16550_COM4 0x481a6000 /* UART3 */
#define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */
#define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */
-#define CONFIG_CONS_INDEX 1
/* PMIC support */
#define CONFIG_POWER_TPS65217
#undef CONFIG_TIMER
#endif
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_PING
-#define CONFIG_DRIVER_TI_CPSW
-#define CONFIG_MII
-#define CONFIG_BOOTP_DEFAULT
-#define CONFIG_BOOTP_DNS
-#define CONFIG_BOOTP_DNS2
-#define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_SUBNETMASK
#define CONFIG_NET_RETRY_COUNT 10
-#define CONFIG_PHY_ADDR 0
-#define CONFIG_PHY_SMSC
/* I2C configuration */
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
#define CONFIG_SYS_I2C_SPEED 400000
#define CONFIG_SYS_I2C_SLAVE 1
-
-#define CONFIG_SHOW_BOOT_PROGRESS
#endif /* ! __CONFIG_AM335X_SHC_H */