/* settings we don;t want on this board */
-#ifndef CONFIG_SPL_BUILD
-# define CONFIG_TIMESTAMP
-#endif
-
-#define CONFIG_SYS_BOOTM_LEN (16 << 20)
-
/* Clock Defines */
#define V_OSCK 24000000 /* Clock output from T2 */
#define V_SCLK (V_OSCK)
-/*
- * in case of SD Card or Network boot we want to have a possibility to
- * debrick the shc, therefore do not read environment from eMMC
- */
-#if defined(CONFIG_SHC_SDBOOT) || defined(CONFIG_SHC_NETBOOT)
-#define CONFIG_SYS_MMC_ENV_DEV 0
-#else
-#define CONFIG_SYS_MMC_ENV_DEV 1
-#endif
-
-/*
- * Info when using boot partitions: As environment resides within first
- * 128 kB, MLO must start at 128 kB == 0x20000
- * ENV at MMC Boot0 Partition - 0/Undefined=user, 1=boot0, 2=boot1,
- * 4..7=general0..3
- */
-
#define CONFIG_HSMMC2_8BIT
-#ifndef CONFIG_SHC_ICT
-/*
- * In builds other than ICT, reset to retry after timeout
- * Define a timeout after which a stopped bootloader continues autoboot
- * (only works with CONFIG_RESET_TO_RETRY)
- */
-# define CONFIG_BOOT_RETRY_TIME 30
-# define CONFIG_RESET_TO_RETRY
-#endif
-
#ifndef CONFIG_SPL_BUILD
#define CONFIG_EXTRA_ENV_SETTINGS \
"loadaddr=0x80200000\0" \
#if defined CONFIG_SHC_NETBOOT
/* Network Boot */
-# define CONFIG_BOOTCOMMAND \
- "run fusecmd; " \
- "if run netboot; then " \
- "echo Booting from network; " \
- "else " \
- "echo ERROR: Cannot boot from network!; " \
- "panic; " \
- "fi; "
#elif defined CONFIG_SHC_SDBOOT /* !defined CONFIG_SHC_NETBOOT */
/* SD-Card Boot */
-# define CONFIG_BOOTCOMMAND \
- "if mmc dev 0; mmc rescan; then " \
- "run sd_setup; " \
- "else " \
- "echo ERROR: SD/MMC-Card not detected!; " \
- "panic; " \
- "fi; " \
- "if run loaduimage; then " \
- "echo Bootable SD/MMC-Card inserted, booting from it!; " \
- "run mmcboot; " \
- "else " \
- "echo ERROR: Unable to load uImage from SD/MMC-Card!; " \
- "panic; " \
- "fi; "
#elif defined CONFIG_SHC_ICT
/* ICT adapter boots only u-boot and does HW partitioning */
-# define CONFIG_BOOTCOMMAND \
- "if mmc dev 0; mmc rescan; then " \
- "run sd_setup; " \
- "else " \
- "echo ERROR: SD/MMC-Card not detected!; " \
- "panic; " \
- "fi; " \
- "run fusecmd; "
#else /* !defined CONFIG_SHC_NETBOOT, !defined CONFIG_SHC_SDBOOT */
/* Regular Boot from internal eMMC */
-# define CONFIG_BOOTCOMMAND \
- "if mmc dev 1; mmc rescan; then " \
- "run emmc_setup; " \
- "else " \
- "echo ERROR: eMMC device not detected!; " \
- "panic; " \
- "fi; " \
- "if run loaduimage; then " \
- "run mmcboot; " \
- "else " \
- "echo ERROR Unable to load uImage from eMMC!; " \
- "echo Performing Rollback!; " \
- "setenv _active_ ${active_root}; " \
- "setenv _inactive_ ${inactive_root}; " \
- "setenv active_root ${_inactive_}; " \
- "setenv inactive_root ${_active_}; " \
- "saveenv; " \
- "reset; " \
- "fi; "
#endif /* Regular Boot */
#define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */
#define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */
-/* PMIC support */
-#define CONFIG_POWER_TPS65217
-
-/* SPL */
-
-/*
- * Disable MMC DM for SPL build and can be re-enabled after adding
- * DM support in SPL
- */
-#ifdef CONFIG_SPL_BUILD
-#undef CONFIG_DM_MMC
-#undef CONFIG_TIMER
-#endif
-
-#define CONFIG_BOOTP_DEFAULT
-#define CONFIG_BOOTP_DNS2
-#define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_NET_RETRY_COUNT 10
-
-/* I2C configuration */
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
-#define CONFIG_SYS_I2C_SPEED 400000
-#define CONFIG_SYS_I2C_SLAVE 1
#endif /* ! __CONFIG_AM335X_SHC_H */